lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFq6gD3gAmz2hHTGga6YFXfq6KuaQvP-GVo1JYbkOUV8Pg@mail.gmail.com> Date: Fri, 6 Sep 2024 11:00:52 +0200 From: Ulf Hansson <ulf.hansson@...aro.org> To: Kevin Hilman <khilman@...libre.com> Cc: linux-pm@...r.kernel.org, Nishanth Menon <nm@...com>, Vibhore Vardhan <vibhore@...com>, Dhruva Gole <d-gole@...com>, Akashdeep Kaur <a-kaur@...com>, Sebin Francis <sebin.francis@...com>, Markus Schneider-Pargmann <msp@...libre.com>, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH v3 1/3] pmdomain: ti_sci: add per-device latency constraint management On Fri, 6 Sept 2024 at 00:03, Kevin Hilman <khilman@...libre.com> wrote: > > For each device in a TI SCI PM domain, check whether the device has > any resume latency constraints set via per-device PM QoS. If > constraints are set, send them to DM via the new SCI constraints API. > > Checking for constraints happen for each device before system-wide > suspend (via ->suspend() hook.) > > An important detail here is that the PM domain driver inserts itself > into the path of both the ->suspend() and ->resume() hook path > of *all* devices in the PM domain. This allows generic PM domain code > to handle the constraint management and communication with TI SCI. > > Further, this allows device drivers to use existing PM QoS APIs to > add/update constraints. > > DM firmware clears constraints during its resume, so Linux has > to check/update/send constraints each time system suspends. > > Co-developed-by: Vibhore Vardhan <vibhore@...com> > Signed-off-by: Vibhore Vardhan <vibhore@...com> > Signed-off-by: Kevin Hilman <khilman@...libre.com> > Signed-off-by: Dhruva Gole <d-gole@...com> Reviewed-by: Ulf Hansson <ulf.hansson@...aro.org> Kind regards Uffe > --- > drivers/pmdomain/ti/ti_sci_pm_domains.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > > diff --git a/drivers/pmdomain/ti/ti_sci_pm_domains.c b/drivers/pmdomain/ti/ti_sci_pm_domains.c > index 1510d5ddae3d..bb95c40ab3ea 100644 > --- a/drivers/pmdomain/ti/ti_sci_pm_domains.c > +++ b/drivers/pmdomain/ti/ti_sci_pm_domains.c > @@ -13,6 +13,8 @@ > #include <linux/platform_device.h> > #include <linux/pm_domain.h> > #include <linux/slab.h> > +#include <linux/pm_qos.h> > +#include <linux/pm_runtime.h> > #include <linux/soc/ti/ti_sci_protocol.h> > #include <dt-bindings/soc/ti,sci_pm_domain.h> > > @@ -51,6 +53,27 @@ struct ti_sci_pm_domain { > > #define genpd_to_ti_sci_pd(gpd) container_of(gpd, struct ti_sci_pm_domain, pd) > > +static inline bool ti_sci_pd_is_valid_constraint(s32 val) > +{ > + return val != PM_QOS_RESUME_LATENCY_NO_CONSTRAINT; > +} > + > +static void ti_sci_pd_set_lat_constraint(struct device *dev, s32 val) > +{ > + struct generic_pm_domain *genpd = pd_to_genpd(dev->pm_domain); > + struct ti_sci_pm_domain *pd = genpd_to_ti_sci_pd(genpd); > + const struct ti_sci_handle *ti_sci = pd->parent->ti_sci; > + int ret; > + > + ret = ti_sci->ops.pm_ops.set_latency_constraint(ti_sci, val, TISCI_MSG_CONSTRAINT_SET); > + if (ret) > + dev_err(dev, "ti_sci_pd: set latency constraint failed: ret=%d\n", > + ret); > + else > + dev_dbg(dev, "ti_sci_pd: ID:%d set latency constraint %d\n", > + pd->idx, val); > +} > + > /* > * ti_sci_pd_power_off(): genpd power down hook > * @domain: pointer to the powerdomain to power off > @@ -79,6 +102,22 @@ static int ti_sci_pd_power_on(struct generic_pm_domain *domain) > return ti_sci->ops.dev_ops.get_device(ti_sci, pd->idx); > } > > +static int ti_sci_pd_suspend(struct device *dev) > +{ > + int ret; > + s32 val; > + > + ret = pm_generic_suspend(dev); > + if (ret) > + return ret; > + > + val = dev_pm_qos_read_value(dev, DEV_PM_QOS_RESUME_LATENCY); > + if (ti_sci_pd_is_valid_constraint(val)) > + ti_sci_pd_set_lat_constraint(dev, val); > + > + return 0; > +} > + > /* > * ti_sci_pd_xlate(): translation service for TI SCI genpds > * @genpdspec: DT identification data for the genpd > @@ -188,6 +227,13 @@ static int ti_sci_pm_domain_probe(struct platform_device *pdev) > pd->pd.power_on = ti_sci_pd_power_on; > pd->idx = args.args[0]; > pd->parent = pd_provider; > + /* > + * If SCI constraint functions are present, then firmware > + * supports the constraints API. > + */ > + if (pd_provider->ti_sci->ops.pm_ops.set_device_constraint && > + pd_provider->ti_sci->ops.pm_ops.set_latency_constraint) > + pd->pd.domain.ops.suspend = ti_sci_pd_suspend; > > pm_genpd_init(&pd->pd, NULL, true); > > > -- > 2.46.0 >
Powered by blists - more mailing lists