| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240906093630.2428329-7-bigfoot@classfun.cn>
Date: Fri, 6 Sep 2024 17:36:27 +0800
From: Junhao Xie <bigfoot@...ssfun.cn>
To: devicetree@...r.kernel.org,
linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-leds@...r.kernel.org,
linux-pm@...r.kernel.org,
linux-rtc@...r.kernel.org,
linux-watchdog@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org
Cc: Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Pavel Machek <pavel@....cz>,
Lee Jones <lee@...nel.org>,
Sebastian Reichel <sre@...nel.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Heiko Stuebner <heiko@...ech.de>,
Chukun Pan <amadeus@....edu.cn>,
Junhao Xie <bigfoot@...ssfun.cn>
Subject: [PATCH 6/9] hwmon: Add support for Photonicat PMU board temperature sensor
Photonicat PMU MCU will send status reports regularly,
including board temperature.
Signed-off-by: Junhao Xie <bigfoot@...ssfun.cn>
---
drivers/hwmon/Kconfig | 10 +++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/photonicat-hwmon.c | 129 +++++++++++++++++++++++++++++++
3 files changed, 140 insertions(+)
create mode 100644 drivers/hwmon/photonicat-hwmon.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b60fe2e58ad6..b345e4856bcf 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1781,6 +1781,16 @@ config SENSORS_PT5161L
This driver can also be built as a module. If so, the module
will be called pt5161l.
+config SENSORS_PHOTONICAT_PMU_HWMON
+ tristate "Photonicat PMU temperature sensor"
+ depends on MFD_PHOTONICAT_PMU
+ help
+ If you say yes here you get support for temperature sensor on the
+ Photonicat PMU.
+
+ This driver can also be built as a module. If so, the module
+ will be called photonicat-hwmon.
+
config SENSORS_PWM_FAN
tristate "PWM fan"
depends on PWM || COMPILE_TEST
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b1c7056c37db..a30658acb093 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -183,6 +183,7 @@ obj-$(CONFIG_SENSORS_OXP) += oxp-sensors.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_PHOTONICAT_PMU_HWMON) += photonicat-hwmon.o
obj-$(CONFIG_SENSORS_POWERZ) += powerz.o
obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o
obj-$(CONFIG_SENSORS_PT5161L) += pt5161l.o
diff --git a/drivers/hwmon/photonicat-hwmon.c b/drivers/hwmon/photonicat-hwmon.c
new file mode 100644
index 000000000000..f1e3ee5f5781
--- /dev/null
+++ b/drivers/hwmon/photonicat-hwmon.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Junhao Xie <bigfoot@...ssfun.cn>
+ */
+
+#include <linux/completion.h>
+#include <linux/hwmon.h>
+#include <linux/mfd/photonicat-pmu.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+struct pcat_hwmon {
+ struct device *dev;
+ struct pcat_pmu *pmu;
+ struct notifier_block nb;
+ struct device *hwmon;
+ int temperature;
+ struct completion initial_report;
+};
+
+static ssize_t temp1_input_show(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct pcat_hwmon *hwmon = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", hwmon->temperature * 1000);
+}
+
+static DEVICE_ATTR_RO(temp1_input);
+
+static struct attribute *pcat_pmu_temp_attrs[] = {
+ &dev_attr_temp1_input.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(pcat_pmu_temp);
+
+static int pcat_hwmon_notify(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct pcat_hwmon *hwmon = container_of(nb, struct pcat_hwmon, nb);
+ struct pcat_data_cmd_status *status = pcat_data_get_data(data);
+
+ if (action != PCAT_CMD_STATUS_REPORT)
+ return NOTIFY_DONE;
+
+ hwmon->temperature = status->temp - 40;
+ complete(&hwmon->initial_report);
+
+ return NOTIFY_DONE;
+}
+
+static int pcat_hwmon_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+ struct pcat_hwmon *hwmon;
+ const char *label;
+
+ hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ hwmon->dev = dev;
+ hwmon->pmu = dev_get_drvdata(dev->parent);
+ hwmon->nb.notifier_call = pcat_hwmon_notify;
+ init_completion(&hwmon->initial_report);
+ platform_set_drvdata(pdev, hwmon);
+
+ ret = of_property_read_string(dev->of_node, "label", &label);
+ if (ret)
+ return dev_err_probe(dev, ret, "No label property\n");
+
+ ret = pcat_pmu_register_notify(hwmon->pmu, &hwmon->nb);
+ if (ret)
+ return ret;
+
+ if (!wait_for_completion_timeout(&hwmon->initial_report,
+ msecs_to_jiffies(3000))) {
+ ret = dev_err_probe(dev, -ETIMEDOUT,
+ "timeout waiting for initial report\n");
+ goto error;
+ }
+
+ dev_info(dev, "Board Temprature: %d degress C\n", hwmon->temperature);
+
+ hwmon->hwmon = devm_hwmon_device_register_with_groups(
+ dev, label, hwmon, pcat_pmu_temp_groups);
+
+ if (IS_ERR(hwmon->hwmon)) {
+ ret = PTR_ERR(hwmon->hwmon);
+ dev_err_probe(&pdev->dev, ret,
+ "Failed to register hwmon device\n");
+ goto error;
+ }
+
+ return 0;
+error:
+ pcat_pmu_unregister_notify(hwmon->pmu, &hwmon->nb);
+ return ret;
+}
+
+static void pcat_hwmon_remove(struct platform_device *pdev)
+{
+ struct pcat_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ pcat_pmu_unregister_notify(hwmon->pmu, &hwmon->nb);
+}
+
+static const struct of_device_id pcat_hwmon_dt_ids[] = {
+ { .compatible = "ariaboard,photonicat-pmu-hwmon", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pcat_hwmon_dt_ids);
+
+static struct platform_driver pcat_hwmon_driver = {
+ .driver = {
+ .name = "photonicat-hwmon",
+ .of_match_table = pcat_hwmon_dt_ids,
+ },
+ .probe = pcat_hwmon_probe,
+ .remove = pcat_hwmon_remove,
+};
+module_platform_driver(pcat_hwmon_driver);
+
+MODULE_AUTHOR("Junhao Xie <bigfoot@...ssfun.cn>");
+MODULE_DESCRIPTION("Photonicat PMU Hardware Monitor");
+MODULE_LICENSE("GPL");
--
2.46.0
Powered by blists - more mailing lists