lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240906102049.7059-13-victorshihgli@gmail.com>
Date: Fri,  6 Sep 2024 18:20:39 +0800
From: Victor Shih <victorshihgli@...il.com>
To: ulf.hansson@...aro.org,
	adrian.hunter@...el.com
Cc: linux-mmc@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	benchuanggli@...il.com,
	Lucas.Lai@...esyslogic.com.tw,
	HL.Liu@...esyslogic.com.tw,
	Greg.tu@...esyslogic.com.tw,
	dlunev@...omium.org,
	Victor Shih <victorshihgli@...il.com>,
	Ben Chuang <ben.chuang@...esyslogic.com.tw>,
	AKASHI Takahiro <takahiro.akashi@...aro.org>,
	Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: [PATCH V21 12/22] mmc: sdhci-uhs2: add set_power() to support vdd2

From: Victor Shih <victor.shih@...esyslogic.com.tw>

This is a UHS-II version of sdhci's set_power operation.
Use sdhci_uhs2_set_power() to set VDD2 for support UHS2 interface.
VDD2, as well as VDD, is handled here.

Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
---

Updates in V17:
 - Export sdhci_uhs2_set_power() function.

Updates in V13:
 - Drop use vmmc2.
 - Modify comment message.

Updates in V10:
 - Move some definitions of PatchV9[05/23] to PatchV10[11/23].

Updates in V9:
 - Modify annotations in sdhci_get_vdd_value().

Updates in V8:
 - Adjust the position of matching brackets.
 - Add the initial value of the pwr in sdhci_uhs2_set_power().

Updates in V7:
 - Add clear the power reg before setting a new value
   in sdhci_uhs2_set_power().
 - Add MMC_VDD_34_35 case and MMC_VDD_35_36 case in sdhci_get_vdd_value().
 - Drop pwr variable in sdhci_get_vdd_value().

Updates in V6:
 - Add mmc_opt_regulator_set_ocr().
 - Remove unnecessary functions.

---

 drivers/mmc/host/sdhci-uhs2.c | 49 ++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-uhs2.h |  1 +
 drivers/mmc/host/sdhci.c      | 61 +++++++++++++++++++----------------
 drivers/mmc/host/sdhci.h      |  1 +
 4 files changed, 84 insertions(+), 28 deletions(-)

diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 3d16f1ef9344..0cfe9a3f91f7 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -59,6 +59,13 @@ EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs);
  *                                                                           *
 \*****************************************************************************/
 
+static inline int mmc_opt_regulator_set_ocr(struct mmc_host *mmc,
+					    struct regulator *supply,
+					    unsigned short vdd_bit)
+{
+	return IS_ERR_OR_NULL(supply) ? 0 : mmc_regulator_set_ocr(mmc, supply, vdd_bit);
+}
+
 /**
  * sdhci_uhs2_reset - invoke SW reset
  * @host: SDHCI host
@@ -86,6 +93,48 @@ void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask)
 }
 EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
 
+void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd)
+{
+	struct mmc_host *mmc = host->mmc;
+	u8 pwr = 0;
+
+	if (mode != MMC_POWER_OFF) {
+		pwr = sdhci_get_vdd_value(vdd);
+		if (!pwr)
+			WARN(1, "%s: Invalid vdd %#x\n",
+			     mmc_hostname(host->mmc), vdd);
+		pwr |= SDHCI_VDD2_POWER_180;
+	}
+
+	if (host->pwr == pwr)
+		return;
+	host->pwr = pwr;
+
+	if (pwr == 0) {
+		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+
+		mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+		mmc_regulator_set_vqmmc2(mmc, &mmc->ios);
+	} else {
+		mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+		/* support 1.8v only for now */
+		mmc_regulator_set_vqmmc2(mmc, &mmc->ios);
+
+		/* Clear the power reg before setting a new value */
+		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+
+		/* vdd first */
+		pwr |= SDHCI_POWER_ON;
+		sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL);
+		mdelay(5);
+
+		pwr |= SDHCI_VDD2_POWER_ON;
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+		mdelay(5);
+	}
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_set_power);
+
 /*****************************************************************************\
  *                                                                           *
  * Driver init/exit                                                          *
diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
index caaf9fba4975..3efa8dd690bf 100644
--- a/drivers/mmc/host/sdhci-uhs2.h
+++ b/drivers/mmc/host/sdhci-uhs2.h
@@ -178,5 +178,6 @@ struct sdhci_host;
 
 void sdhci_uhs2_dump_regs(struct sdhci_host *host);
 void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
+void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd);
 
 #endif /* __SDHCI_UHS2_H */
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5a5fe3528bb4..366c3d30dba6 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -23,7 +23,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
-
+#include <linux/bug.h>
 #include <linux/leds.h>
 
 #include <linux/mmc/mmc.h>
@@ -2061,41 +2061,46 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
 		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
 }
 
+unsigned short sdhci_get_vdd_value(unsigned short vdd)
+{
+	switch (1 << vdd) {
+	case MMC_VDD_165_195:
+	/*
+	 * Without a regulator, SDHCI does not support 2.0v
+	 * so we only get here if the driver deliberately
+	 * added the 2.0v range to ocr_avail. Map it to 1.8v
+	 * for the purpose of turning on the power.
+	 */
+	case MMC_VDD_20_21:
+		return SDHCI_POWER_180;
+	case MMC_VDD_29_30:
+	case MMC_VDD_30_31:
+		return SDHCI_POWER_300;
+	case MMC_VDD_32_33:
+	case MMC_VDD_33_34:
+	/*
+	 * 3.4V ~ 3.6V are valid only for those platforms where it's
+	 * known that the voltage range is supported by hardware.
+	 */
+	case MMC_VDD_34_35:
+	case MMC_VDD_35_36:
+		return SDHCI_POWER_330;
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(sdhci_get_vdd_value);
+
 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 			   unsigned short vdd)
 {
 	u8 pwr = 0;
 
 	if (mode != MMC_POWER_OFF) {
-		switch (1 << vdd) {
-		case MMC_VDD_165_195:
-		/*
-		 * Without a regulator, SDHCI does not support 2.0v
-		 * so we only get here if the driver deliberately
-		 * added the 2.0v range to ocr_avail. Map it to 1.8v
-		 * for the purpose of turning on the power.
-		 */
-		case MMC_VDD_20_21:
-			pwr = SDHCI_POWER_180;
-			break;
-		case MMC_VDD_29_30:
-		case MMC_VDD_30_31:
-			pwr = SDHCI_POWER_300;
-			break;
-		case MMC_VDD_32_33:
-		case MMC_VDD_33_34:
-		/*
-		 * 3.4 ~ 3.6V are valid only for those platforms where it's
-		 * known that the voltage range is supported by hardware.
-		 */
-		case MMC_VDD_34_35:
-		case MMC_VDD_35_36:
-			pwr = SDHCI_POWER_330;
-			break;
-		default:
+		pwr = sdhci_get_vdd_value(vdd);
+		if (!pwr) {
 			WARN(1, "%s: Invalid vdd %#x\n",
 			     mmc_hostname(host->mmc), vdd);
-			break;
 		}
 	}
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 66ab90bd4017..0f78708d0c70 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -836,6 +836,7 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
 				     unsigned char mode,
 				     unsigned short vdd);
+unsigned short sdhci_get_vdd_value(unsigned short vdd);
 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 			   unsigned short vdd);
 int sdhci_get_cd_nogpio(struct mmc_host *mmc);
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ