lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240906103511.28416-1-Raju.Lakkaraju@microchip.com> Date: Fri, 6 Sep 2024 16:05:06 +0530 From: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com> To: <netdev@...r.kernel.org> CC: <davem@...emloft.net>, <linux@...linux.org.uk>, <kuba@...nel.org>, <andrew@...n.ch>, <hkallweit1@...il.com>, <richardcochran@...il.com>, <rdunlap@...radead.org>, <bryan.whitehead@...rochip.com>, <edumazet@...gle.com>, <pabeni@...hat.com>, <maxime.chevallier@...tlin.com>, <linux-kernel@...r.kernel.org>, <horms@...nel.org>, <UNGLinuxDriver@...rochip.com> Subject: [PATCH net-next V6 0/5] Add support to PHYLINK for LAN743x/PCI11x1x chips This is the follow-up patch series of https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html Divide the PHYLINK adaptation and SFP modifications into two separate patch series. The current patch series focuses on transitioning the LAN743x driver's PHY support from phylib to phylink. Tested on PCI11010 Rev-1 Evaluation board Change List: ============ V5 -> V6: - Remove the lan743x_find_max_speed( ) function. Not require - Add EEE enable check before calling lan743x_mac_eee_enable( ) function V4 -> V5: - Remove the fixed_phy_unregister( ) function. Not require - Remove the "phydev->eee_enabled" check to update the MAC EEE enable/disable - Call lan743x_mac_eee_enable() with true after update tx_lpi_timer. - Add phy_support_eee() to initialize the EEE flags V3 -> V4: - Add fixed-link patch along with this series. Note: Note: This code was developed by Mr.Russell King Ref: https://lore.kernel.org/netdev/LV8PR11MB8700C786F5F1C274C73036CC9F8E2@LV8PR11MB8700.namprd11.prod.outlook.com/T/#me943adf54f1ea082edf294aba448fa003a116815 - Change phylink fixed-link function header's string from "Returns" to "Returns:" - Remove the EEE private variable from LAN743x adapter strcture and fix the EEE's set/get functions - set the individual caps (i.e. _RGMII, _RGMII_ID, _RGMII_RXID and __RGMII_TXID) replace with phy_interface_set_rgmii( ) function - Change lan743x_set_eee( ) to lan743x_mac_eee_enable( ) V2 -> V3: - Remove the unwanted parens in each of these if() sub-blocks - Replace "to_net_dev(config->dev)" with "netdev". - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces - Fix the lan743x_phy_handle_exists( ) return type V1 -> V2: - Fix the Russell King's comments i.e. remove the speed, duplex update in lan743x_phylink_mac_config( ) - pre-March 2020 legacy support has been removed V0 -> V1: - Integrate with Synopsys DesignWare XPCS drivers - Based on external review comments, - Changes made to SGMII interface support only 1G/100M/10M bps speed - Changes made to 2500Base-X interface support only 2.5Gbps speed - Add check for not is_sgmii_en with is_sfp_support_en support - Change the "pci11x1x_strap_get_status" function return type from void to int - Add ethtool phylink wol, eee, pause get/set functions Raju Lakkaraju (5): net: phylink: Add phylink_set_fixed_link() to configure fixed link state in phylink net: lan743x: Create separate PCS power reset function net: lan743x: Create separate Link Speed Duplex state function net: lan743x: Migrate phylib to phylink net: lan743x: Add support to ethtool phylink get and set settings drivers/net/ethernet/microchip/Kconfig | 5 +- .../net/ethernet/microchip/lan743x_ethtool.c | 123 ++-- drivers/net/ethernet/microchip/lan743x_main.c | 646 +++++++++++------- drivers/net/ethernet/microchip/lan743x_main.h | 4 + drivers/net/phy/phylink.c | 42 ++ include/linux/phylink.h | 2 + 6 files changed, 498 insertions(+), 324 deletions(-) -- 2.34.1
Powered by blists - more mailing lists