lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240906-meson-rst-aux-v4-5-08824c3d108b@baylibre.com>
Date: Fri, 06 Sep 2024 15:34:50 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Philipp Zabel <p.zabel@...gutronix.de>, Stephen Boyd <sboyd@...nel.org>, 
 Neil Armstrong <neil.armstrong@...aro.org>, 
 Kevin Hilman <khilman@...libre.com>, Jerome Brunet <jbrunet@...libre.com>, 
 Martin Blumenstingl <martin.blumenstingl@...glemail.com>, 
 Jiucheng Xu <jiucheng.xu@...ogic.com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-amlogic@...ts.infradead.org, 
 linux-kernel@...r.kernel.org
Subject: [PATCH v4 5/9] reset: amlogic: use reset number instead of
 register count

The reset driver from audio clock controller may register less
reset than a register can hold. To avoid making any change while
switching to auxiliary support, use the number of reset instead of the
register count to define the bounds of the reset controller.

Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
 drivers/reset/reset-meson.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index 6a90613c8095..e31c1b7c9e4d 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -17,7 +17,7 @@
 #include <linux/types.h>
 
 struct meson_reset_param {
-	unsigned int reg_count;
+	unsigned int reset_num;
 	unsigned int reset_offset;
 	unsigned int level_offset;
 	bool level_low_reset;
@@ -87,28 +87,28 @@ static const struct reset_control_ops meson_reset_ops = {
 };
 
 static const struct meson_reset_param meson8b_param = {
-	.reg_count	= 8,
+	.reset_num	= 256,
 	.reset_offset	= 0x0,
 	.level_offset	= 0x7c,
 	.level_low_reset = true,
 };
 
 static const struct meson_reset_param meson_a1_param = {
-	.reg_count	= 3,
+	.reset_num	= 96,
 	.reset_offset	= 0x0,
 	.level_offset	= 0x40,
 	.level_low_reset = true,
 };
 
 static const struct meson_reset_param meson_s4_param = {
-	.reg_count	= 6,
+	.reset_num	= 192,
 	.reset_offset	= 0x0,
 	.level_offset	= 0x40,
 	.level_low_reset = true,
 };
 
 static const struct meson_reset_param t7_param = {
-	.reg_count      = 7,
+	.reset_num      = 224,
 	.reset_offset	= 0x0,
 	.level_offset   = 0x40,
 	.level_low_reset = true,
@@ -156,8 +156,7 @@ static int meson_reset_probe(struct platform_device *pdev)
 				     "can't init regmap mmio region\n");
 
 	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE
-		* regmap_config.reg_stride;
+	data->rcdev.nr_resets = data->param->reset_num;
 	data->rcdev.ops = &meson_reset_ops;
 	data->rcdev.of_node = dev->of_node;
 

-- 
2.45.2


Powered by blists - more mailing lists