[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240907-sdm660-wifi-v1-7-e316055142f8@linaro.org>
Date: Sat, 07 Sep 2024 21:48:18 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Rob Clark <robdclark@...il.com>, Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>, Joerg Roedel <joro@...tes.org>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: iommu@...ts.linux.dev, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, ath11k@...ts.infradead.org,
Kalle Valo <kvalo@...nel.org>
Subject: [PATCH 7/7] arm64: dts: qcom: sda660-ifc6560: enable mDSP and WiFi
devices
Enable the onboard WiFi device present on the Inforce IFC6560 SBC.
Pretty much like MSM8998 this device also doesn't generate the
MSA_READY_IND indication.
For the reference:
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40050000
ath10k_snoc 18800000.wifi: qmi fw_version 0x101d01da fw_build_timestamp 2018-07-26 21:42 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0.1.c2-00474-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: qmi not waiting for msa_ready indicator
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.54 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
Cc: ath11k@...ts.infradead.org
Cc: Kalle Valo <kvalo@...nel.org>
---
.../arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 09bc010ce56a..7948c8f6ab64 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -252,6 +252,11 @@ &qusb2phy1 {
vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
};
+&remoteproc_mss {
+ firmware-name = "qcom/sda660/mba.mbn", "qcom/sda660/modem.mbn";
+ status = "okay";
+};
+
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm660-regulators";
@@ -291,6 +296,11 @@ vreg_l1a_1p225: l1 {
regulator-allow-set-load;
};
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <848000>;
+ regulator-max-microvolt = <848000>;
+ };
+
vreg_l6a_1p3: l6 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1368000>;
@@ -489,3 +499,15 @@ &usb3_qmpphy {
vdda-pll-supply = <&vreg_l10a_1p8>;
status = "okay";
};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l9a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l6a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l19a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l8b_3p3>;
+
+ qcom,ath10k-calibration-variant = "Inforce_IFC6560";
+};
--
2.39.2
Powered by blists - more mailing lists