linux-kernel - [PATCH] staging: rtl8723bs: Fix tabs for indent and + in comment blocks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240908180902.3196764-1-sayyad.abid16@gmail.com>
Date: Sun,  8 Sep 2024 23:39:03 +0530
From: Sayyad Abid <sayyad.abid16@...il.com>
To: linux-staging@...ts.linux.dev
Cc: gregkh@...uxfoundation.org,
	philipp.g.hortmann@...il.com,
	sayyad.abid16@...il.com,
	linux-kernel@...r.kernel.org
Subject: [PATCH] staging: rtl8723bs: Fix tabs for indent and + in comment blocks

This patch fixes the use of space instead of tabs,
removes trailing space and adds "+" each line in a comment block.

Signed-off-by: Sayyad Abid <sayyad.abid16@...il.com>
---
 .../staging/rtl8723bs/include/hal_pwr_seq.h   | 46 +++++++++----------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/staging/rtl8723bs/include/hal_pwr_seq.h b/drivers/staging/rtl8723bs/include/hal_pwr_seq.h
index 5e43cc89f535..10fef1b3f393 100644
--- a/drivers/staging/rtl8723bs/include/hal_pwr_seq.h
+++ b/drivers/staging/rtl8723bs/include/hal_pwr_seq.h
@@ -5,26 +5,26 @@
 #include "HalPwrSeqCmd.h"

 /*
-	Check document WM-20130815-JackieLau-RTL8723B_Power_Architecture v08.vsd
-	There are 6 HW Power States:
-	0: POFF--Power Off
-	1: PDN--Power Down
-	2: CARDEMU--Card Emulation
-	3: ACT--Active Mode
-	4: LPS--Low Power State
-	5: SUS--Suspend
-
-	The transition from different states are defined below
-	TRANS_CARDEMU_TO_ACT
-	TRANS_ACT_TO_CARDEMU
-	TRANS_CARDEMU_TO_SUS
-	TRANS_SUS_TO_CARDEMU
-	TRANS_CARDEMU_TO_PDN
-	TRANS_ACT_TO_LPS
-	TRANS_LPS_TO_ACT
-
-	TRANS_END
-*/
+ *	Check document WM-20130815-JackieLau-RTL8723B_Power_Architecture v08.vsd
+ *	There are 6 HW Power States:
+ *	0: POFF--Power Off
+ *	1: PDN--Power Down
+ *	2: CARDEMU--Card Emulation
+ *	3: ACT--Active Mode
+ *	4: LPS--Low Power State
+ *	5: SUS--Suspend
+ *
+ *	The transition from different states are defined below
+ *	TRANS_CARDEMU_TO_ACT
+ *	TRANS_ACT_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_SUS
+ *	TRANS_SUS_TO_CARDEMU
+ *	TRANS_CARDEMU_TO_PDN
+ *	TRANS_ACT_TO_LPS
+ *	TRANS_LPS_TO_ACT
+ *
+ *	TRANS_END
+ */
 #define	RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS	26
 #define	RTL8723B_TRANS_ACT_TO_CARDEMU_STEPS	15
 #define	RTL8723B_TRANS_CARDEMU_TO_SUS_STEPS	15
@@ -101,7 +101,7 @@
 	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x20}, /*0x07 = 0x20 , SOP option to disable BG/MB*/	\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01 enable WL suspend*/	\
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT2, BIT2}, /*0x04[10] = 1, enable SW LPS*/	\
-        {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 1}, /*0x48[16] = 1 to enable GPIO9 as EXT WAKEUP*/   \
+	{0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 1}, /*0x48[16] = 1 to enable GPIO9 as EXT WAKEUP*/   \
 	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*0x23[4] = 1b'1 12H LDO enter sleep mode*/   \
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/	\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
@@ -112,7 +112,7 @@
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3 | BIT7, 0}, /*clear suspend enable and power down enable*/	\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/	\
 	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
-        {0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/   \
+	{0x004A, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0}, /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/   \
 	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/\
 	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*0x23[4] = 1b'0 12H LDO enter normal mode*/   \
 	{0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*PCIe DMA start*/
@@ -209,7 +209,7 @@
 #define RTL8723B_TRANS_END															\
 	/* format */																\
 	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/								\
-	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, PWR_CMD_END, 0, 0},
+	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, 0, PWR_CMD_END, 0, 0},


 extern struct wlan_pwr_cfg rtl8723B_power_on_flow[RTL8723B_TRANS_CARDEMU_TO_ACT_STEPS+RTL8723B_TRANS_END_STEPS];
--
2.39.2