| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<LV3PR12MB9260B950945FA23B8B90A96EE2992@LV3PR12MB9260.namprd12.prod.outlook.com>
Date: Mon, 9 Sep 2024 17:55:52 +0000
From: "Thangaraj, Senthil Nathan" <SenthilNathan.Thangaraj@....com>
To: "Simek, Michal" <michal.simek@....com>, "Jain, Ronak" <ronak.jain@....com>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2] firmware: xilinx: Add missing debug firmware
interfaces
LGTM
Best regards,
Senthil
> -----Original Message-----
> From: linux-arm-kernel <linux-arm-kernel-bounces@...ts.infradead.org> On
> Behalf Of Michal Simek
> Sent: Monday, September 2, 2024 12:07 AM
> To: Jain, Ronak <ronak.jain@....com>
> Cc: linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH v2] firmware: xilinx: Add missing debug firmware
> interfaces
>
> Caution: This message originated from an External Source. Use proper caution
> when opening attachments, clicking links, or responding.
>
>
> Hi,
>
> On 7/30/24 10:43, Ronak Jain wrote:
> > Add missing PM EEMI APIs interface in debug firmware driver.
> >
> > The debugfs firmware driver interface is intended for testing and
> > debugging the EEMI APIs only. This interface does not contain any
> > checking regarding improper usage, and the number, type and valid
> > ranges of the arguments. This interface must be used with a lot of
> > care. In fact, accessing this interface during normal PM operation
> > will very likely cause unexpected problems.
> >
> > The debugfs interface shouldn't be used in the production system and
> > hence it is disabled by default in defconfig.
> >
> > Signed-off-by: Ronak Jain <ronak.jain@....com>
> > Signed-off-by: Michal Simek <michal.simek@....com>
> > Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
> > ---
> > Changes in v2:
> > - Address the compilation error
> >
> > References to the public documents who talks about the debugfs
> > interface.
> > https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842232/Zynq+Ul
> > traScale+MPSoC+Power+Management+-
> +Linux+Kernel#ZynqUltraScale%EF%BC%8B
> > MPSoCPowerManagement-LinuxKernel-Debugfs
> >
> > https://docs.amd.com/r/en-US/ug1137-zynq-ultrascale-mpsoc-
> swdev/Debug-
> > Interface
> > ---
> > drivers/firmware/xilinx/zynqmp-debug.c | 162
> ++++++++++++++++++++++++-
> > include/linux/firmware/xlnx-zynqmp.h | 4 +
> > 2 files changed, 165 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/firmware/xilinx/zynqmp-debug.c
> > b/drivers/firmware/xilinx/zynqmp-debug.c
> > index 8528850af889..22853ae0efdf 100644
> > --- a/drivers/firmware/xilinx/zynqmp-debug.c
> > +++ b/drivers/firmware/xilinx/zynqmp-debug.c
> > @@ -31,12 +31,50 @@ static char debugfs_buf[PAGE_SIZE];
> >
> > #define PM_API(id) {id, #id, strlen(#id)}
> > static struct pm_api_info pm_api_list[] = {
> > + PM_API(PM_FORCE_POWERDOWN),
> > + PM_API(PM_REQUEST_WAKEUP),
> > + PM_API(PM_SYSTEM_SHUTDOWN),
> > + PM_API(PM_REQUEST_NODE),
> > + PM_API(PM_RELEASE_NODE),
> > + PM_API(PM_SET_REQUIREMENT),
> > PM_API(PM_GET_API_VERSION),
> > + PM_API(PM_REGISTER_NOTIFIER),
> > + PM_API(PM_RESET_ASSERT),
> > + PM_API(PM_RESET_GET_STATUS),
> > + PM_API(PM_GET_CHIPID),
> > + PM_API(PM_PINCTRL_SET_FUNCTION),
> > + PM_API(PM_PINCTRL_CONFIG_PARAM_GET),
> > + PM_API(PM_PINCTRL_CONFIG_PARAM_SET),
> > + PM_API(PM_IOCTL),
> > + PM_API(PM_CLOCK_ENABLE),
> > + PM_API(PM_CLOCK_DISABLE),
> > + PM_API(PM_CLOCK_GETSTATE),
> > + PM_API(PM_CLOCK_SETDIVIDER),
> > + PM_API(PM_CLOCK_GETDIVIDER),
> > + PM_API(PM_CLOCK_SETPARENT),
> > + PM_API(PM_CLOCK_GETPARENT),
> > PM_API(PM_QUERY_DATA),
> > };
> >
> > static struct dentry *firmware_debugfs_root;
> >
> > +/**
> > + * zynqmp_pm_ioctl - PM IOCTL for device control and configs
> > + * @node: Node ID of the device
> > + * @ioctl: ID of the requested IOCTL
> > + * @arg1: Argument 1 of requested IOCTL call
> > + * @arg2: Argument 2 of requested IOCTL call
> > + * @arg3: Argument 3 of requested IOCTL call
> > + * @out: Returned output value
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_ioctl(const u32 node, const u32 ioctl, const u32
> arg1,
> > + const u32 arg2, const u32 arg3, u32 *out) {
> > + return zynqmp_pm_invoke_fn(PM_IOCTL, out, 5, node, ioctl, arg1,
> > +arg2, arg3); }
> > +
> > /**
> > * zynqmp_pm_argument_value() - Extract argument value from a PM-API
> request
> > * @arg: Entered PM-API argument in string format
> > @@ -95,6 +133,128 @@ static int process_api_request(u32 pm_id, u64
> *pm_api_arg, u32 *pm_api_ret)
> > sprintf(debugfs_buf, "PM-API Version = %d.%d\n",
> > pm_api_version >> 16, pm_api_version & 0xffff);
> > break;
> > + case PM_FORCE_POWERDOWN:
> > + ret = zynqmp_pm_force_pwrdwn(pm_api_arg[0],
> > + pm_api_arg[1] ? pm_api_arg[1] :
> > + ZYNQMP_PM_REQUEST_ACK_NO);
> > + break;
> > + case PM_REQUEST_WAKEUP:
> > + ret = zynqmp_pm_request_wake(pm_api_arg[0],
> > + pm_api_arg[1], pm_api_arg[2],
> > + pm_api_arg[3] ? pm_api_arg[3] :
> > + ZYNQMP_PM_REQUEST_ACK_NO);
> > + break;
> > + case PM_SYSTEM_SHUTDOWN:
> > + ret = zynqmp_pm_system_shutdown(pm_api_arg[0],
> pm_api_arg[1]);
> > + break;
> > + case PM_REQUEST_NODE:
> > + ret = zynqmp_pm_request_node(pm_api_arg[0],
> > + pm_api_arg[1] ? pm_api_arg[1] :
> > + ZYNQMP_PM_CAPABILITY_ACCESS,
> > + pm_api_arg[2] ? pm_api_arg[2] : 0,
> > + pm_api_arg[3] ? pm_api_arg[3] :
> > + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > + break;
> > + case PM_RELEASE_NODE:
> > + ret = zynqmp_pm_release_node(pm_api_arg[0]);
> > + break;
> > + case PM_SET_REQUIREMENT:
> > + ret = zynqmp_pm_set_requirement(pm_api_arg[0],
> > + pm_api_arg[1] ? pm_api_arg[1] :
> > + ZYNQMP_PM_CAPABILITY_CONTEXT,
> > + pm_api_arg[2] ?
> > + pm_api_arg[2] : 0,
> > + pm_api_arg[3] ? pm_api_arg[3] :
> > + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > + break;
> > + case PM_REGISTER_NOTIFIER:
> > + ret = zynqmp_pm_register_notifier(pm_api_arg[0],
> > + pm_api_arg[1] ?
> > + pm_api_arg[1] : 0,
> > + pm_api_arg[2] ?
> > + pm_api_arg[2] : 0,
> > + pm_api_arg[3] ?
> > + pm_api_arg[3] : 0);
> > + break;
> > + case PM_RESET_ASSERT:
> > + ret = zynqmp_pm_reset_assert(pm_api_arg[0], pm_api_arg[1]);
> > + break;
> > + case PM_RESET_GET_STATUS:
> > + ret = zynqmp_pm_reset_get_status(pm_api_arg[0],
> &pm_api_ret[0]);
> > + if (!ret)
> > + sprintf(debugfs_buf, "Reset status: %u\n",
> > + pm_api_ret[0]);
> > + break;
> > + case PM_GET_CHIPID:
> > + ret = zynqmp_pm_get_chipid(&pm_api_ret[0], &pm_api_ret[1]);
> > + if (!ret)
> > + sprintf(debugfs_buf, "Idcode: %#x, Version:%#x\n",
> > + pm_api_ret[0], pm_api_ret[1]);
> > + break;
> > + case PM_PINCTRL_SET_FUNCTION:
> > + ret = zynqmp_pm_pinctrl_set_function(pm_api_arg[0],
> > + pm_api_arg[1]);
> > + break;
> > + case PM_PINCTRL_CONFIG_PARAM_GET:
> > + ret = zynqmp_pm_pinctrl_get_config(pm_api_arg[0],
> pm_api_arg[1],
> > + &pm_api_ret[0]);
> > + if (!ret)
> > + sprintf(debugfs_buf,
> > + "Pin: %llu, Param: %llu, Value: %u\n",
> > + pm_api_arg[0], pm_api_arg[1],
> > + pm_api_ret[0]);
> > + break;
> > + case PM_PINCTRL_CONFIG_PARAM_SET:
> > + ret = zynqmp_pm_pinctrl_set_config(pm_api_arg[0],
> > + pm_api_arg[1],
> > + pm_api_arg[2]);
> > + break;
> > + case PM_IOCTL:
> > + ret = zynqmp_pm_ioctl(pm_api_arg[0], pm_api_arg[1],
> > + pm_api_arg[2], pm_api_arg[3],
> > + pm_api_arg[4], &pm_api_ret[0]);
> > + if (!ret && (pm_api_arg[1] == IOCTL_GET_RPU_OPER_MODE ||
> > + pm_api_arg[1] == IOCTL_GET_PLL_FRAC_MODE ||
> > + pm_api_arg[1] == IOCTL_GET_PLL_FRAC_DATA ||
> > + pm_api_arg[1] == IOCTL_READ_GGS ||
> > + pm_api_arg[1] == IOCTL_READ_PGGS ||
> > + pm_api_arg[1] == IOCTL_READ_REG))
> > + sprintf(debugfs_buf, "IOCTL return value: %u\n",
> > + pm_api_ret[1]);
> > + if (!ret && pm_api_arg[1] == IOCTL_GET_QOS)
> > + sprintf(debugfs_buf, "Default QoS: %u\nCurrent QoS: %u\n",
> > + pm_api_ret[1], pm_api_ret[2]);
> > + break;
> > + case PM_CLOCK_ENABLE:
> > + ret = zynqmp_pm_clock_enable(pm_api_arg[0]);
> > + break;
> > + case PM_CLOCK_DISABLE:
> > + ret = zynqmp_pm_clock_disable(pm_api_arg[0]);
> > + break;
> > + case PM_CLOCK_GETSTATE:
> > + ret = zynqmp_pm_clock_getstate(pm_api_arg[0], &pm_api_ret[0]);
> > + if (!ret)
> > + sprintf(debugfs_buf, "Clock state: %u\n",
> > + pm_api_ret[0]);
> > + break;
> > + case PM_CLOCK_SETDIVIDER:
> > + ret = zynqmp_pm_clock_setdivider(pm_api_arg[0], pm_api_arg[1]);
> > + break;
> > + case PM_CLOCK_GETDIVIDER:
> > + ret = zynqmp_pm_clock_getdivider(pm_api_arg[0],
> &pm_api_ret[0]);
> > + if (!ret)
> > + sprintf(debugfs_buf, "Divider Value: %d\n",
> > + pm_api_ret[0]);
> > + break;
> > + case PM_CLOCK_SETPARENT:
> > + ret = zynqmp_pm_clock_setparent(pm_api_arg[0], pm_api_arg[1]);
> > + break;
> > + case PM_CLOCK_GETPARENT:
> > + ret = zynqmp_pm_clock_getparent(pm_api_arg[0],
> &pm_api_ret[0]);
> > + if (!ret)
> > + sprintf(debugfs_buf,
> > + "Clock parent Index: %u\n", pm_api_ret[0]);
> > + break;
> > case PM_QUERY_DATA:
> > qdata.qid = pm_api_arg[0];
> > qdata.arg1 = pm_api_arg[1]; @@ -150,7 +310,7 @@ static
> > ssize_t zynqmp_pm_debugfs_api_write(struct file *file,
> > char *kern_buff, *tmp_buff;
> > char *pm_api_req;
> > u32 pm_id = 0;
> > - u64 pm_api_arg[4] = {0, 0, 0, 0};
> > + u64 pm_api_arg[5] = {0, 0, 0, 0, 0};
> > /* Return values from PM APIs calls */
> > u32 pm_api_ret[4] = {0, 0, 0, 0};
> >
> > diff --git a/include/linux/firmware/xlnx-zynqmp.h
> > b/include/linux/firmware/xlnx-zynqmp.h
> > index d7d07afc0532..563382cf16f2 100644
> > --- a/include/linux/firmware/xlnx-zynqmp.h
> > +++ b/include/linux/firmware/xlnx-zynqmp.h
> > @@ -218,9 +218,13 @@ enum pm_ioctl_id {
> > /* Runtime feature configuration */
> > IOCTL_SET_FEATURE_CONFIG = 26,
> > IOCTL_GET_FEATURE_CONFIG = 27,
> > + /* IOCTL for Secure Read/Write Interface */
> > + IOCTL_READ_REG = 28,
> > /* Dynamic SD/GEM configuration */
> > IOCTL_SET_SD_CONFIG = 30,
> > IOCTL_SET_GEM_CONFIG = 31,
> > + /* IOCTL to get default/current QoS */
> > + IOCTL_GET_QOS = 34,
> > };
> >
> > enum pm_query_id {
>
> Applied.
> M
Powered by blists - more mailing lists