| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240910151845.17308-11-svarbanov@suse.de>
Date: Tue, 10 Sep 2024 18:18:44 +0300
From: Stanimir Varbanov <svarbanov@...e.de>
To: linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rpi-kernel@...ts.infradead.org,
linux-pci@...r.kernel.org,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Jim Quinlan <jim2101024@...il.com>,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
kw@...ux.com,
Philipp Zabel <p.zabel@...gutronix.de>,
Andrea della Porta <andrea.porta@...e.com>,
Phil Elwell <phil@...pberrypi.com>,
Jonathan Bell <jonathan@...pberrypi.com>,
Stanimir Varbanov <svarbanov@...e.de>
Subject: [PATCH v2 -next 10/11] arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
Add PCIe devicetree nodes, plus needed reset and mip MSI-X
controllers.
Signed-off-by: Stanimir Varbanov <svarbanov@...e.de>
---
arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 166 ++++++++++++++++++++++
1 file changed, 166 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6e5a984c1d4e..9dd127d4c9a2 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -192,6 +192,12 @@ soc: soc@...c000000 {
#address-cells = <1>;
#size-cells = <1>;
+ pcie_rescal: reset-controller@...500 {
+ compatible = "brcm,bcm7216-pcie-sata-rescal";
+ reg = <0x00119500 0x10>;
+ #reset-cells = <0>;
+ };
+
sdio1: mmc@...000 {
compatible = "brcm,bcm2712-sdhci",
"brcm,sdhci-brcmstb";
@@ -204,6 +210,12 @@ sdio1: mmc@...000 {
mmc-ddr-3_3v;
};
+ bcm_reset: reset-controller@...4318 {
+ compatible = "brcm,brcmstb-reset";
+ reg = <0x01504318 0x30>;
+ #reset-cells = <1>;
+ };
+
system_timer: timer@...03000 {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7c003000 0x1000>;
@@ -267,6 +279,160 @@ gicv2: interrupt-controller@...f9000 {
};
};
+ axi@...0000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x00 0x00000000 0x10 0x00000000 0x01 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ dma-ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>,
+ <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>,
+ <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>,
+ <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>;
+
+ pcie0: pcie@...000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x00 0x00100000 0x00 0x9310>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ max-link-speed = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bcm_reset 42>, <&pcie_rescal>;
+ reset-names = "bridge", "rescal";
+ msi-controller;
+ msi-parent = <&pcie0>;
+
+ ranges = <0x02000000 0x00 0x00000000
+ 0x17 0x00000000
+ 0x00 0xfffffffc>,
+ <0x43000000 0x04 0x00000000
+ 0x14 0x00000000
+ 0x3 0x00000000>;
+
+ dma-ranges = <0x43000000 0x10 0x00000000
+ 0x00 0x00000000
+ 0x10 0x00000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@...000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x00 0x00110000 0x00 0x9310>;
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ max-link-speed = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bcm_reset 43>, <&pcie_rescal>;
+ reset-names = "bridge", "rescal";
+ msi-parent = <&mip1>;
+
+ ranges = <0x02000000 0x00 0x00000000
+ 0x1b 0x00000000
+ 0x00 0xfffffffc>,
+ <0x43000000 0x04 0x00000000
+ 0x18 0x00000000
+ 0x03 0x00000000>;
+
+ dma-ranges = <0x03000000 0x10 0x00000000
+ 0x00 0x00000000
+ 0x10 0x00000000>;
+
+ status = "disabled";
+ };
+
+ pcie2: pcie@...000 {
+ compatible = "brcm,bcm2712-pcie";
+ reg = <0x00 0x00120000 0x00 0x9310>;
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ max-link-speed = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <4>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupt-parent = <&gicv2>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bcm_reset 44>, <&pcie_rescal>;
+ reset-names = "bridge", "rescal";
+ msi-parent = <&mip0>;
+
+ ranges = <0x02000000 0x00 0x00000000
+ 0x1f 0x00000000
+ 0x00 0xfffffffc>,
+ <0x43000000 0x04 0x00000000
+ 0x1c 0x00000000
+ 0x03 0x00000000>;
+
+ dma-ranges = <0x02000000 0x00 0x00000000
+ 0x1f 0x00000000
+ 0x00 0x00400000>,
+ <0x43000000 0x10 0x00000000
+ 0x00 0x00000000
+ 0x10 0x00000000>;
+
+ status = "disabled";
+ };
+
+ mip0: msi-controller@...000 {
+ compatible = "brcm,bcm2712-mip";
+ reg = <0x00 0x00130000 0x00 0xc0>,
+ <0xff 0xfffff000 0x00 0x1000>;
+ msi-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+ };
+
+ mip1: msi-controller@...000 {
+ compatible = "brcm,bcm2712-mip";
+ reg = <0x00 0x00131000 0x00 0xc0>,
+ <0xff 0xffffe000 0x00 0x1000>;
+ msi-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ msi-ranges = <&gicv2 GIC_SPI 255 IRQ_TYPE_EDGE_RISING 8>;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
--
2.35.3
Powered by blists - more mailing lists