| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <166d37d1-1590-4b0a-8c20-3c635726a733@ti.com>
Date: Tue, 10 Sep 2024 23:57:30 +0530
From: "Anwar, Md Danish" <a0501179@...com>
To: Roger Quadros <rogerq@...nel.org>, MD Danish Anwar <danishanwar@...com>,
<robh@...nel.org>, <jan.kiszka@...mens.com>,
<dan.carpenter@...aro.org>, <saikrishnag@...vell.com>,
<andrew@...n.ch>, <javier.carrasco.cruz@...il.com>,
<jacob.e.keller@...el.com>, <diogo.ivo@...mens.com>,
<horms@...nel.org>, <richardcochran@...il.com>, <pabeni@...hat.com>,
<kuba@...nel.org>, <edumazet@...gle.com>, <davem@...emloft.net>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
Vignesh Raghavendra
<vigneshr@...com>,
Ravi Gunasekaran <r-gunasekaran@...com>
Subject: Re: [PATCH net-next v5 4/5] net: ti: icssg-prueth: Enable HSR Tx
duplication, Tx Tag and Rx Tag offload
On 9/10/2024 11:36 PM, Roger Quadros wrote:
>
>
> On 10/09/2024 20:52, Anwar, Md Danish wrote:
>> Hi Roger,
>>
>> On 9/10/2024 11:08 PM, Roger Quadros wrote:
>>>
>>>
>>> On 06/09/2024 14:15, MD Danish Anwar wrote:
>>>> From: Ravi Gunasekaran <r-gunasekaran@...com>
>>>>
>>>> The HSR stack allows to offload its Tx packet duplication functionality to
>>>> the hardware. Enable this offloading feature for ICSSG driver. Add support
>>>> to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard.
>>>>
>>>> Inorder to enable hsr-tag-ins-offload, hsr-dup-offload must also be enabled
>>>
>>> "In order"
>>>
>>>> as these are tightly coupled in the firmware implementation.
>>>>
>>>> Duplicate discard is done as part of RX tag removal and it is
>>>> done by the firmware. When driver sends the r30 command
>>>> ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as
>>>> duplicate discard.
>>>>
>>>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@...com>
>>>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>>>> ---
>>>> drivers/net/ethernet/ti/icssg/icssg_common.c | 18 ++++++++++---
>>>> drivers/net/ethernet/ti/icssg/icssg_config.c | 4 ++-
>>>> drivers/net/ethernet/ti/icssg/icssg_config.h | 2 ++
>>>> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 28 +++++++++++++++++++-
>>>> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 3 +++
>>>> 5 files changed, 50 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>> index b9d8a93d1680..fdebeb2f84e0 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>> @@ -660,14 +660,15 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>>>> {
>>>> struct cppi5_host_desc_t *first_desc, *next_desc, *cur_desc;
>>>> struct prueth_emac *emac = netdev_priv(ndev);
>>>> + struct prueth *prueth = emac->prueth;
>>>> struct netdev_queue *netif_txq;
>>>> struct prueth_tx_chn *tx_chn;
>>>> dma_addr_t desc_dma, buf_dma;
>>>> + u32 pkt_len, dst_tag_id;
>>>> int i, ret = 0, q_idx;
>>>> bool in_tx_ts = 0;
>>>> int tx_ts_cookie;
>>>> void **swdata;
>>>> - u32 pkt_len;
>>>> u32 *epib;
>>>>
>>>> pkt_len = skb_headlen(skb);
>>>> @@ -712,9 +713,20 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>>>>
>>>> /* set dst tag to indicate internal qid at the firmware which is at
>>>> * bit8..bit15. bit0..bit7 indicates port num for directed
>>>> - * packets in case of switch mode operation
>>>> + * packets in case of switch mode operation and port num 0
>>>> + * for undirected packets in case of HSR offload mode
>>>> */
>>>> - cppi5_desc_set_tags_ids(&first_desc->hdr, 0, (emac->port_id | (q_idx << 8)));
>>>> + dst_tag_id = emac->port_id | (q_idx << 8);
>>>> +
>>>> + if (prueth->is_hsr_offload_mode &&
>>>> + (ndev->features & NETIF_F_HW_HSR_DUP))
>>>> + dst_tag_id = PRUETH_UNDIRECTED_PKT_DST_TAG;
>>>> +
>>>> + if (prueth->is_hsr_offload_mode &&
>>>> + (ndev->features & NETIF_F_HW_HSR_TAG_INS))
>>>> + epib[1] |= PRUETH_UNDIRECTED_PKT_TAG_INS;
>>>> +
>>>> + cppi5_desc_set_tags_ids(&first_desc->hdr, 0, dst_tag_id);
>>>> k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
>>>> cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
>>>> swdata = cppi5_hdesc_get_swdata(first_desc);
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>> index 7b2e6c192ff3..72ace151d8e9 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>> @@ -531,7 +531,9 @@ static const struct icssg_r30_cmd emac_r32_bitmask[] = {
>>>> {{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
>>>> {{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx DISABLE*/
>>>> {{0xffff0010, EMAC_NONE, 0xffff0010, EMAC_NONE}}, /* VLAN AWARE*/
>>>> - {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/
>>>> + {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}}, /* VLAN UNWARE*/
>>>> + {{0xffff2000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* HSR_RX_OFFLOAD_ENABLE */
>>>> + {{0xdfff0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}} /* HSR_RX_OFFLOAD_DISABLE */
>>>> };
>>>>
>>>> int icssg_set_port_state(struct prueth_emac *emac,
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>> index 1ac60283923b..92c2deaa3068 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>> @@ -80,6 +80,8 @@ enum icssg_port_state_cmd {
>>>> ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
>>>> ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
>>>> ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
>>>> + ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE,
>>>> + ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE,
>>>> ICSSG_EMAC_PORT_MAX_COMMANDS
>>>> };
>>>>
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>> index 676168d6fded..9af06454ba64 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>> @@ -41,7 +41,10 @@
>>>> #define DEFAULT_PORT_MASK 1
>>>> #define DEFAULT_UNTAG_MASK 1
>>>>
>>>> -#define NETIF_PRUETH_HSR_OFFLOAD_FEATURES NETIF_F_HW_HSR_FWD
>>>> +#define NETIF_PRUETH_HSR_OFFLOAD_FEATURES (NETIF_F_HW_HSR_FWD | \
>>>> + NETIF_F_HW_HSR_DUP | \
>>>> + NETIF_F_HW_HSR_TAG_INS | \
>>>> + NETIF_F_HW_HSR_TAG_RM)
>>>>
>>>> /* CTRLMMR_ICSSG_RGMII_CTRL register bits */
>>>> #define ICSSG_CTRL_RGMII_ID_MODE BIT(24)
>>>> @@ -758,6 +761,21 @@ static void emac_change_hsr_feature(struct net_device *ndev,
>>>> }
>>>> }
>>>>
>>>> +static netdev_features_t emac_ndo_fix_features(struct net_device *ndev,
>>>> + netdev_features_t features)
>>>> +{
>>>> + /* In order to enable hsr tag insertion offload, hsr dup offload must
>>>> + * also be enabled as these two are tightly coupled in firmware
>>>> + * implementation.
>>>> + */
>>>> + if (features & NETIF_F_HW_HSR_TAG_INS)
>>>> + features |= NETIF_F_HW_HSR_DUP;
>>>
>>> What if only NETIF_F_HW_HSR_DUP was set? Don't you have to set NETIF_F_HW_HSR_TAG_INS as well?
>>>
>>>> + else
>>>> + features &= ~NETIF_F_HW_HSR_DUP;
>>>
>>> what if NETIF_F_HW_HSR_DUP was still set?
>>>
>>> I think you need to write a logic like follows.
>>> if both are already cleared in ndev->features and any one is set in features you set both in features.
>>> if both are already set in ndev->features and any one is cleared in features you clear both in features.
>>>
>>> is this reasonable?
>>>
>>
>> Yes that does sound reasonable,
>> How does below code look to you.
>>
>> if (!(ndev->features & NETIF_F_HW_HSR_DUP) &&
>> !(ndev->features & NETIF_F_HW_HSR_TAG_INS))
>
> While this is OK. it could also be
> if (!(ndev->features & (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS)))
> Your choice.
>
>> if ((features & NETIF_F_HW_HSR_DUP) ||
>> (features & NETIF_F_HW_HSR_TAG_INS)) {
>> features |= NETIF_F_HW_HSR_DUP;
>> features |= NETIF_F_HW_HSR_TAG_INS;
> how about one line?
> features |= NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS;
>> }
>
> then you can get rid of the braces.
>
Yes I could do this but this make the line length go beyond 80
characters. That's why I thought of putting this in two lines.
>>
>> if ((ndev->features & NETIF_F_HW_HSR_DUP) &&
>> (ndev->features & NETIF_F_HW_HSR_TAG_INS))
>> if (!(features & NETIF_F_HW_HSR_DUP) ||
>> !(features & NETIF_F_HW_HSR_TAG_INS)) {
>> features &= ~NETIF_F_HW_HSR_DUP;
>> features &= ~NETIF_F_HW_HSR_TAG_INS;
>
> features &= ~(NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS);
>
>> }
>>
>>>> +
>>>> + return features;
>>>> +}
>>>> +
>>>> static int emac_ndo_set_features(struct net_device *ndev,
>>>> netdev_features_t features)
>>>> {
>>>> @@ -780,6 +798,7 @@ static const struct net_device_ops emac_netdev_ops = {
>>>> .ndo_eth_ioctl = icssg_ndo_ioctl,
>>>> .ndo_get_stats64 = icssg_ndo_get_stats64,
>>>> .ndo_get_phys_port_name = icssg_ndo_get_phys_port_name,
>>>> + .ndo_fix_features = emac_ndo_fix_features,
>>>> .ndo_set_features = emac_ndo_set_features,
>>>> };
>>>>
>>>> @@ -1007,6 +1026,13 @@ static void icssg_change_mode(struct prueth *prueth)
>>>>
>>>> for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
>>>> emac = prueth->emac[mac];
>>>> + if (prueth->is_hsr_offload_mode) {
>>>> + if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM)
>>>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE);
>>>> + else
>>>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE);
>>>> + }
>>>> +
>>>> if (netif_running(emac->ndev)) {
>>>> icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan,
>>>> ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>> index a4b025fae797..bba6da2e6bd8 100644
>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>> @@ -59,6 +59,9 @@
>>>>
>>>> #define IEP_DEFAULT_CYCLE_TIME_NS 1000000 /* 1 ms */
>>>>
>>>> +#define PRUETH_UNDIRECTED_PKT_DST_TAG 0
>>>> +#define PRUETH_UNDIRECTED_PKT_TAG_INS BIT(30)
>>>> +
>>>> /* Firmware status codes */
>>>> #define ICSS_HS_FW_READY 0x55555555
>>>> #define ICSS_HS_FW_DEAD 0xDEAD0000 /* lower 16 bits contain error code */
>>>
>>
>
--
Thanks and Regards,
Md Danish Anwar
Powered by blists - more mailing lists