[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5d47dd133343473b9108c22fe5ff9a44@siengine.com>
Date: Tue, 10 Sep 2024 09:53:20 +0000
From: Liu Kimriver/刘金河 <kimriver.liu@...ngine.com>
To: Jarkko Nikula <jarkko.nikula@...ux.intel.com>
CC: "andriy.shevchenko@...ux.intel.com" <andriy.shevchenko@...ux.intel.com>,
"mika.westerberg@...ux.intel.com" <mika.westerberg@...ux.intel.com>,
"jsd@...ihalf.com" <jsd@...ihalf.com>,
"andi.shyti@...nel.org"
<andi.shyti@...nel.org>,
"linux-i2c@...r.kernel.org"
<linux-i2c@...r.kernel.org>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v8] i2c: designware: fix master is holding SCL low while
ENABLE bit is disabled
Hi Jarkko
>-----Original Message-----
>From: Jarkko Nikula <jarkko.nikula@...ux.intel.com>
>Sent: 2024年9月10日 17:03
>To: Liu Kimriver/刘金河 <kimriver.liu@...ngine.com>
>Cc: andriy.shevchenko@...ux.intel.com; mika.westerberg@...ux.intel.com; jsd@...ihalf.com; andi.shyti@...nel.org; linux-i2c@...r.kernel.org; linux-kernel@...r.kernel.org
>Subject: Re: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
>On 9/10/24 9:13 AM, Kimriver Liu wrote:
>> It was observed issuing ABORT bit(IC_ENABLE[1]) will not work when
>> IC_ENABLE is already disabled.
>>
>> Check if ENABLE bit(IC_ENABLE[0]) is disabled when the master is
>> holding SCL low. If ENABLE bit is disabled, the software need enable
>> it before trying to issue ABORT bit. otherwise, the controller ignores
>> any write to ABORT bit.
>>
>> Signed-off-by: Kimriver Liu <kimriver.liu@...ngine.com>
>> Reviewed-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
>>
>> ---
>> V7->V8:
>> 1.calculate this delay based on the actual speed in use
>> fsleep(DIV_ROUND_CLOSEST_ULL(10 * MICRO, t->bus_freq_hz))
>> 2. add Reviewed-by: Mika Westerberg<mika.westerberg@...ux.intel.com>
>> V6->V7:
>> 1. add Subject versioning [PATCH v7]
>> 2. change fsleep(25) to usleep_range(25, 250)
>> 3. Add macro definition DW_iC_ENABLE_ENABLE to fix compile errors
>> | Reported-by: kernel test robot <lkp@...el.com>
>> | Closes:https://lore.kernel.org/oe-kbuild-all/202409082011.9JF6aYsk-lkp@intel.com/
>> 4. base:
>> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commi
>> t/?h=master
>> V5->V6: restore i2c_dw_is_master_idling() function checking
>> V4->V5: delete master idling checking
>> V3->V4:
>> 1. update commit messages and add patch version and changelog
>> 2. move print the error message in i2c_dw_xfer
>> V2->V3: change (!enable) to (!(enable & DW_IC_ENABLE_ENABLE))
>> V1->V2: used standard words in function names and addressed review
>> V1->comments
>>
>> link to V1:
>> https://lore.kernel.org/lkml/20240904064224.2394-1-kimriver.liu@siengi
>> ne.com/
>> ---
>> drivers/i2c/busses/i2c-designware-common.c | 13 +++++++++++++
>> drivers/i2c/busses/i2c-designware-core.h | 1 +
>> drivers/i2c/busses/i2c-designware-master.c | 22 ++++++++++++++++++++++
>> 3 files changed, 36 insertions(+)
>>
>Acked-by: Jarkko Nikula <jarkko.nikula@...ux.intel.com>
Thanks for the Acked!
I will update a new version V9 based on Andy's suggestions.
------------------------------------------
Best Regards
Kimriver Liu
Powered by blists - more mailing lists