[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240911172626.GB915638-robh@kernel.org>
Date: Wed, 11 Sep 2024 12:26:26 -0500
From: Rob Herring <robh@...nel.org>
To: Ayush Singh <ayush@...gleboard.org>
Cc: fabien.parent@...aro.org, d-gole@...com, lorforlinux@...gleboard.org,
jkridner@...gleboard.org, robertcnelson@...gleboard.org,
Andrew Davis <afd@...com>, Miguel Ojeda <ojeda@...nel.org>,
Alex Gaynor <alex.gaynor@...il.com>,
Boqun Feng <boqun.feng@...il.com>, Gary Guo <gary@...yguo.net>,
Björn Roy Baron <bjorn3_gh@...tonmail.com>,
Benno Lossin <benno.lossin@...ton.me>,
Andreas Hindborg <a.hindborg@...nel.org>,
Alice Ryhl <aliceryhl@...gle.com>, Trevor Gross <tmgross@...ch.edu>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Derek Kiernan <derek.kiernan@....com>,
Dragan Cvetic <dragan.cvetic@....com>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>, linux-kernel@...r.kernel.org,
rust-for-linux@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/8] dt-bindings: connector: Add MikorBUS connector
On Wed, Sep 11, 2024 at 07:57:19PM +0530, Ayush Singh wrote:
> Add DT bindings for mikroBUS interface. MikroBUS [0] is an open standard
> developed by MikroElektronika for connecting add-on boards to
> microcontrollers or microprocessors.
Typo in the subject...
Isn't this v6? Where's the revision history?
>
> MikroBUS connector node will optionally act as nexus nodes for routing
> GPIOs and PWM.
>
> For GPIOs, the following pin numbering should be followed:
>
> 0: PWM
> 1: INT
> 2: RX
> 3: TX
> 4: SCL
> 5: SDA
> 6: MOSI
> 7: MISO
> 8: SCK
> 9: CS
> 10: RST
> 11: AN
>
> For PWM, the PWM pin should be on channel 0.
>
> I am not quite sure how to deal with the nexus node properties
> (#gpio-cells, gpio-map, gpio-map-mask, gpio-map-pass-thru) since they
> seem to conflict with upstream gpio schema (gpio-controller is a
> dependency of #gpio-cells).
>
> [0]: https://www.mikroe.com/
>
> Signed-off-by: Ayush Singh <ayush@...gleboard.org>
> ---
> .../bindings/connector/mikrobus-connector.yaml | 40 ++++++++++++++++++++++
> MAINTAINERS | 5 +++
> 2 files changed, 45 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/connector/mikrobus-connector.yaml b/Documentation/devicetree/bindings/connector/mikrobus-connector.yaml
> new file mode 100644
> index 000000000000..603e4627076c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/connector/mikrobus-connector.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +#
> +# Copyright (c) Ayush Singh <ayush@...gleboard.org>
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/connector/mikrobus-connector.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: mikroBUS add-on board socket
> +
> +maintainers:
> + - Ayush Singh <ayush@...gleboard.org>
> +
> +properties:
> + compatible:
> + const: mikrobus-connector
> +
> +required:
> + - compatible
> +
> +additionalProperties: true
Cannot be true. You're schema must be complete. I don't understand what
happened to everything else in the binding.
> +
> +examples:
> + - |
> + mikrobus_connector0: mikrobus-connector0 {
> + status = "okay";
> + compatible = "mikrobus-connector";
> +
> + #gpio-cells = <2>;
> + gpio-map =
> + <0 0 &main_gpio1 11 0>, <1 0 &main_gpio1 9 0>,
> + <2 0 &main_gpio1 24 0>, <3 0 &main_gpio1 25 0>,
> + <4 0 &main_gpio1 22 0>, <5 0 &main_gpio1 23 0>,
> + <6 0 &main_gpio1 7 0>, <7 0 &main_gpio1 8 0>,
> + <8 0 &main_gpio1 14 0>, <9 0 &main_gpio1 13 0>,
> + <10 0 &main_gpio1 12 0>, <11 0 &main_gpio1 10 0>;
> + gpio-map-mask = <0xf 0x0>;
> + gpio-map-pass-thru = <0x0 0x1>;
> + };
> +
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0a3d9e17295a..0cc27446b18a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15429,6 +15429,11 @@ M: Oliver Neukum <oliver@...kum.org>
> S: Maintained
> F: drivers/usb/image/microtek.*
>
> +MIKROBUS CONNECTOR
> +M: Ayush Singh <ayush@...gleboard.org>
> +S: Maintained
> +F: Documentation/devicetree/bindings/connector/mikrobus-connector.yaml
> +
> MIKROTIK CRS3XX 98DX3236 BOARD SUPPORT
> M: Luka Kovacic <luka.kovacic@...tura.hr>
> M: Luka Perkov <luka.perkov@...tura.hr>
>
> --
> 2.46.0
>
Powered by blists - more mailing lists