linux-kernel - Re: [PATCH] PCI: vmd: Delay interrupt handling on MTL VMD controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240912104547.00005865@linux.intel.com>
Date: Thu, 12 Sep 2024 10:45:47 -0700
From: Nirmal Patel <nirmal.patel@...ux.intel.com>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, Keith Busch
 <kbusch@...nel.org>, jonathan.derrick@...ux.dev, acelan.kao@...onical.com,
 lpieralisi@...nel.org, kw@...ux.com, robh@...nel.org, bhelgaas@...gle.com,
 linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] PCI: vmd: Delay interrupt handling on MTL VMD
 controller

On Fri, 6 Sep 2024 09:56:59 +0800
Kai-Heng Feng <kai.heng.feng@...onical.com> wrote:

> On Wed, Sep 4, 2024 at 2:22 PM Manivannan Sadhasivam
> <manivannan.sadhasivam@...aro.org> wrote:
> >
> > On Wed, Sep 04, 2024 at 09:57:08AM +0800, Kai-Heng Feng wrote:  
> > > On Tue, Sep 3, 2024 at 10:51 PM Keith Busch <kbusch@...nel.org>
> > > wrote:  
> > > >
> > > > On Tue, Sep 03, 2024 at 03:07:45PM +0800, Kai-Heng Feng wrote:  
> > > > > On Tue, Sep 3, 2024 at 12:29 PM Manivannan Sadhasivam
> > > > > <manivannan.sadhasivam@...aro.org> wrote:  
> > > > > >
> > > > > > On Tue, Sep 03, 2024 at 10:55:44AM +0800, Kai-Heng Feng
> > > > > > wrote:  
> > > > > > > Meteor Lake VMD has a bug that the IRQ raises before the
> > > > > > > DMA region is ready, so the requested IO is considered
> > > > > > > never completed: [   97.343423] nvme nvme0: I/O 259 QID 2
> > > > > > > timeout, completion polled [   97.343446] nvme nvme0: I/O
> > > > > > > 384 QID 3 timeout, completion polled [   97.343459] nvme
> > > > > > > nvme0: I/O 320 QID 4 timeout, completion polled [
> > > > > > > 97.343470] nvme nvme0: I/O 707 QID 5 timeout, completion
> > > > > > > polled
> > > > > > >
> > > > > > > The is documented as erratum MTL016 [0]. The suggested
> > > > > > > workaround is to "The VMD MSI interrupt-handler should
> > > > > > > initially perform a dummy register read to the MSI
> > > > > > > initiator device prior to any writes to ensure proper
> > > > > > > PCIe ordering." which essentially is adding a delay
> > > > > > > before the interrupt handling. 
> > > > > >
> > > > > > Why can't you add a dummy register read instead? Adding a
> > > > > > delay for PCIe ordering is not going to work always.  
> > > > >
> > > > > This can be done too. But it can take longer than 4us delay,
> > > > > so I'd like to keep it a bit faster here.  
> > > >
> > > > An added delay is just a side effect of the read. The read
> > > > flushes pending device-to-host writes, which is most likely
> > > > what the errata really requires. I think Mani is right, you
> > > > need to pay that register read penalty to truly fix this.  
> > >
> > > OK, will change the quirk to perform dummy register read.
> > >
> > > But I am not sure which is the "MSI initiator device", is it VMD
> > > controller or NVMe devices?
> > >  
> >
> > 'MSI initiator' should be the NVMe device. My understanding is that
> > the workaround suggests reading the NVMe register from the MSI
> > handler before doing any write to the device to ensures that the
> > previous writes from the device are flushed.  
> 
> Hmm, it would be really great to contain the quirk in VMD controller.
> Is there anyway to do that right before generic_handle_irq()?
> 
The bug is in hardware, I agree with Kai-Heng to contain it to VMD
controller.
 
> >
> > And this sounds like the workaround should be done in the NVMe
> > driver as it has the knowledge of the NVMe registers. But isn't the
> > NVMe driver already reading CQE status first up in the ISR?  
> 
> The VMD interrupt is fired before the CQE status update, hence the
> bug.
> 
> Kai-Heng
> 
> >
> > - Mani
> >  
> > > Kai-Heng
> > >  
> > > >  
> > > > > > > +     /* Erratum MTL016 */
> > > > > > > +     VMD_FEAT_INTERRUPT_QUIRK        = (1 << 6),
> > > > > > >  };
> > > > > > >
> > > > > > >  #define VMD_BIOS_PM_QUIRK_LTR        0x1003  /* 3145728
> > > > > > > ns */ @@ -90,6 +94,8 @@ static
> > > > > > > DEFINE_IDA(vmd_instance_ida); */
> > > > > > >  static DEFINE_RAW_SPINLOCK(list_lock);
> > > > > > >
> > > > > > > +static bool interrupt_delay;
> > > > > > > +
> > > > > > >  /**
> > > > > > >   * struct vmd_irq - private data to map driver IRQ to
> > > > > > > the VMD shared vector
> > > > > > >   * @node:    list item for parent traversal.
> > > > > > > @@ -105,6 +111,7 @@ struct vmd_irq {
> > > > > > >       struct vmd_irq_list     *irq;
> > > > > > >       bool                    enabled;
> > > > > > >       unsigned int            virq;
> > > > > > > +     bool                    delay_irq;  
> > > > > >
> > > > > > This is unused. Perhaps you wanted to use this instead of
> > > > > > interrupt_delay?  
> > > > >
> > > > > This is leftover, will scratch this.  
> > > >
> > > > Maybe you should actually use it instead of making a global?
> > > > The quirk says it is device specific, so no need to punish
> > > > every device if it doesn't need it (unlikely as it is to see
> > > > such a thing).  
> >
> > --
> > மணிவண்ணன் சதாசிவம்