| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240912093307.40488-1-andrei.simion@microchip.com>
Date: Thu, 12 Sep 2024 12:33:07 +0300
From: Andrei Simion <andrei.simion@...rochip.com>
To: <nicolas.ferre@...rochip.com>, <claudiu.beznea@...on.dev>,
<alexandre.belloni@...tlin.com>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, Andrei Simion <andrei.simion@...rochip.com>
Subject: [PATCH v2] ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode
Add the atmel,usart-mode property to the UART nodes. This ensures
compliance with the atmel,at91-usart.yaml schema and resolves the errors
below:
serial@200: $nodename:0: 'serial@...' does not match
'^spi(@.*|-([0-9]|[1-9][0-9]+))?$'
serial@200: atmel,use-dma-rx: False schema does not allow True
serial@200: atmel,use-dma-tx: False schema does not allow True
serial@200: atmel,fifo-size: False schema does not allow [[16]]
These errors indicate that the property
atmel,usart-mode = <AT91_USART_MODE_SERIAL> is missing for
UART nodes 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, and 12.
Fixes: 99c808335877 ("ARM: dts: at91: sam9x60: Add missing flexcom definitions")
Acked-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
Signed-off-by: Andrei Simion <andrei.simion@...rochip.com>
---
v1 -> v2:
- reword commit message
- add Acked-by received in V1
---
arch/arm/boot/dts/microchip/sam9x60.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 04a6d716ecaf..0ba424bba7cc 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -174,6 +174,7 @@ flx4: flexcom@...00000 {
uart4: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -376,6 +377,7 @@ flx11: flexcom@...20000 {
uart11: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -427,6 +429,7 @@ flx12: flexcom@...24000 {
uart12: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -586,6 +589,7 @@ flx6: flexcom@...10000 {
uart6: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -637,6 +641,7 @@ flx7: flexcom@...14000 {
uart7: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -688,6 +693,7 @@ flx8: flexcom@...18000 {
uart8: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -739,6 +745,7 @@ flx0: flexcom@...1c000 {
uart0: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -809,6 +816,7 @@ flx1: flexcom@...20000 {
uart1: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -879,6 +887,7 @@ flx2: flexcom@...24000 {
uart2: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -949,6 +958,7 @@ flx3: flexcom@...28000 {
uart3: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -1074,6 +1084,7 @@ flx9: flexcom@...40000 {
uart9: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
@@ -1125,6 +1136,7 @@ flx10: flexcom@...44000 {
uart10: serial@200 {
compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma0
(AT91_XDMAC_DT_MEM_IF(0) |
base-commit: 32ffa5373540a8d1c06619f52d019c6cdc948bb4
--
2.34.1
Powered by blists - more mailing lists