Message-Id: <20240913-starqltechn_integration_upstream-v4-15-2d2efd5c5877@gmail.com>
Date: Fri, 13 Sep 2024 18:07:58 +0300
From: Dzmitry Sankouski <dsankouski@...il.com>
To: Sebastian Reichel <sre@...nel.org>, 
 Bjorn Andersson <andersson@...nel.org>, 
 Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Neil Armstrong <neil.armstrong@...aro.org>, 
 Jessica Zhang <quic_jesszhan@...cinc.com>, Sam Ravnborg <sam@...nborg.org>, 
 Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Lee Jones <lee@...nel.org>, 
 Dmitry Torokhov <dmitry.torokhov@...il.com>, Pavel Machek <pavel@....cz>, 
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Uwe Kleine-König <ukleinek@...nel.org>, 
 Krzysztof Kozlowski <krzk@...nel.org>, Chanwoo Choi <cw00.choi@...sung.com>, 
 Simona Vetter <simona@...ll.ch>, cros-qcom-dts-watchers@...omium.org, 
 Konrad Dybcio <konradybcio@...nel.org>, 
 Simona Vetter <simona.vetter@...ll.ch>, 
 Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org, 
 dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org, 
 linux-input@...r.kernel.org, linux-leds@...r.kernel.org, 
 linux-pwm@...r.kernel.org, linux-samsung-soc@...r.kernel.org, 
 Dzmitry Sankouski <dsankouski@...il.com>
Subject: [PATCH v4 15/27] regulator: add s2dos05 regulator support

S2dos05 has 1 buck and 4 LDO regulators, used for powering
panel/touchscreen.

Signed-off-by: Dzmitry Sankouski <dsankouski@...il.com>

---
Changes in v4:
- remove excessive linux/module.h import
- use generic regulator helpers
- use of_match
- use devm_* for mem allocations
- use // style comment
- drop all junk Samsung code
- adjust to depend on sec-core
---
 MAINTAINERS                           |   1 +
 drivers/regulator/Kconfig             |   8 ++
 drivers/regulator/Makefile            |   1 +
 drivers/regulator/s2dos05-regulator.c | 176 ++++++++++++++++++++++++++++++++++
 include/linux/regulator/s2dos05.h     |  73 ++++++++++++++
 5 files changed, 259 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 444cc855a01e..25dcce07180a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20476,6 +20476,7 @@ F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
 F:	drivers/clk/clk-s2mps11.c
 F:	drivers/mfd/sec*.c
+F:	drivers/regulator/s2dos*.c
 F:	drivers/regulator/s2m*.c
 F:	drivers/regulator/s5m*.c
 F:	drivers/rtc/rtc-s5m.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 4b411a09c1a6..63085d73cf74 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1322,6 +1322,14 @@ config REGULATOR_RTQ2208
 	  and two ldos. It features wide output voltage range from 0.4V to 2.05V
 	  and the capability to configure the corresponding power stages.
 
+config REGULATOR_S2DOS05
+	tristate "SLSI S2DOS05 regulator"
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	help
+	  This driver provides support for the voltage regulators of the S2DOS05.
+	  The S2DOS05 is a companion power management IC for the smart phones.
+	  The S2DOS05 has 4 LDOs and 1 BUCK outputs.
+
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
 	depends on MFD_SEC_CORE || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index a61fa42b13c4..d26e0db7c825 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -154,6 +154,7 @@ obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ6752)	+= rtq6752-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ2208) += rtq2208-regulator.o
+obj-$(CONFIG_REGULATOR_S2DOS05) += s2dos05-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
diff --git a/drivers/regulator/s2dos05-regulator.c b/drivers/regulator/s2dos05-regulator.c
new file mode 100644
index 000000000000..1325c8311b08
--- /dev/null
+++ b/drivers/regulator/s2dos05-regulator.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// s2dos05.c - Regulator driver for the Samsung s2dos05
+//
+// Copyright (C) 2024 Dzmitry Sankouski <dsankouski@...il.com>
+
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/regulator/s2dos05.h>
+#include <linux/i2c.h>
+
+struct s2dos05_data {
+	struct regmap *regmap;
+	struct device *dev;
+};
+
+static const struct regulator_ops s2dos05_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_active_discharge	= regulator_set_active_discharge_regmap,
+};
+
+#define _BUCK(macro)	S2DOS05_BUCK##macro
+#define _buck_ops(num)	s2dos05_ops##num
+
+#define _LDO(macro)	S2DOS05_LDO##macro
+#define _REG(ctrl)	S2DOS05_REG##ctrl
+#define _ldo_ops(num)	s2dos05_ops##num
+#define _MASK(macro)	S2DOS05_ENABLE_MASK##macro
+#define _TIME(macro)	S2DOS05_ENABLE_TIME##macro
+
+#define BUCK_DESC(_name, _id, _ops, m, s, v, e, em, t, a) {	\
+	.name		= _name,				\
+	.id		= _id,					\
+	.ops		= _ops,					\
+	.of_match = of_match_ptr(_name),	\
+	.regulators_node = of_match_ptr("regulators"),	\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= m,					\
+	.uV_step	= s,					\
+	.n_voltages	= S2DOS05_BUCK_N_VOLTAGES,		\
+	.vsel_reg	= v,					\
+	.vsel_mask	= S2DOS05_BUCK_VSEL_MASK,		\
+	.enable_reg	= e,					\
+	.enable_mask	= em,					\
+	.enable_time	= t,					\
+	.active_discharge_off = 0,				\
+	.active_discharge_on = S2DOS05_BUCK_FD_MASK,		\
+	.active_discharge_reg	= a,				\
+	.active_discharge_mask	= S2DOS05_BUCK_FD_MASK		\
+}
+
+#define LDO_DESC(_name, _id, _ops, m, s, v, e, em, t, a) {	\
+	.name		= _name,				\
+	.id		= _id,					\
+	.ops		= _ops,					\
+	.of_match = of_match_ptr(_name),	\
+	.regulators_node = of_match_ptr("regulators"),	\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= m,					\
+	.uV_step	= s,					\
+	.n_voltages	= S2DOS05_LDO_N_VOLTAGES,		\
+	.vsel_reg	= v,					\
+	.vsel_mask	= S2DOS05_LDO_VSEL_MASK,		\
+	.enable_reg	= e,					\
+	.enable_mask	= em,					\
+	.enable_time	= t,					\
+	.active_discharge_off = 0,				\
+	.active_discharge_on = S2DOS05_LDO_FD_MASK,		\
+	.active_discharge_reg	= a,				\
+	.active_discharge_mask	= S2DOS05_LDO_FD_MASK		\
+}
+
+static struct regulator_desc regulators[S2DOS05_REGULATOR_MAX] = {
+		// name, id, ops, min_uv, uV_step, vsel_reg, enable_reg
+		LDO_DESC("ldo1", _LDO(1), &_ldo_ops(), _LDO(_MIN1),
+			_LDO(_STEP1), _REG(_LDO1_CFG),
+			_REG(_EN), _MASK(_L1), _TIME(_LDO), _REG(_LDO1_CFG)),
+		LDO_DESC("ldo2", _LDO(2), &_ldo_ops(), _LDO(_MIN1),
+			_LDO(_STEP1), _REG(_LDO2_CFG),
+			_REG(_EN), _MASK(_L2), _TIME(_LDO), _REG(_LDO2_CFG)),
+		LDO_DESC("ldo3", _LDO(3), &_ldo_ops(), _LDO(_MIN2),
+			_LDO(_STEP1), _REG(_LDO3_CFG),
+			_REG(_EN), _MASK(_L3), _TIME(_LDO), _REG(_LDO3_CFG)),
+		LDO_DESC("ldo4", _LDO(4), &_ldo_ops(), _LDO(_MIN2),
+			_LDO(_STEP1), _REG(_LDO4_CFG),
+			_REG(_EN), _MASK(_L4), _TIME(_LDO), _REG(_LDO4_CFG)),
+		BUCK_DESC("buck1", _BUCK(1), &_buck_ops(), _BUCK(_MIN1),
+			_BUCK(_STEP1), _REG(_BUCK_VOUT),
+			_REG(_EN), _MASK(_B1), _TIME(_BUCK), _REG(_BUCK_CFG)),
+};
+
+static int s2dos05_pmic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct of_regulator_match *rdata = NULL;
+	struct s2dos05_data *s2dos05;
+	struct regulator_config config = { };
+	unsigned int rdev_num = ARRAY_SIZE(regulators);
+	int i, ret;
+
+	s2dos05 = devm_kzalloc(dev, sizeof(struct s2dos05_data),
+				GFP_KERNEL);
+	if (!s2dos05)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, s2dos05);
+
+	rdata = devm_kcalloc(dev, rdev_num, sizeof(*rdata), GFP_KERNEL);
+	if (!rdata)
+		return -ENOMEM;
+
+	for (i = 0; i < rdev_num; i++)
+		rdata[i].name = regulators[i].name;
+
+	s2dos05->regmap = iodev->regmap_pmic;
+	s2dos05->dev = dev;
+	if (!dev->of_node)
+		dev->of_node = dev->parent->of_node;
+
+	for (i = 0; i < rdev_num; i++) {
+		struct regulator_dev *regulator;
+
+		config.init_data = rdata[i].init_data;
+		config.of_node = rdata[i].of_node;
+		config.dev = dev;
+		config.driver_data = s2dos05;
+		regulator = devm_regulator_register(&pdev->dev,
+						&regulators[i], &config);
+		if (IS_ERR(regulator)) {
+			ret = PTR_ERR(regulator);
+			dev_err(&pdev->dev, "regulator init failed for %d\n",
+				i);
+		}
+	}
+
+	return ret;
+}
+
+static const struct platform_device_id s2dos05_pmic_id[] = {
+	{ "s2dos05-regulator" },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s2dos05_pmic_id);
+
+static struct platform_driver s2dos05_platform_driver = {
+	.driver = {
+		.name = "s2dos05",
+	},
+	.probe = s2dos05_pmic_probe,
+	.id_table = s2dos05_pmic_id,
+};
+module_platform_driver(s2dos05_platform_driver);
+
+MODULE_AUTHOR("Dzmitry Sankouski <dsankouski@...il.com>");
+MODULE_DESCRIPTION("SAMSUNG s2dos05 Regulator Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/s2dos05.h b/include/linux/regulator/s2dos05.h
new file mode 100644
index 000000000000..2e89fcbce769
--- /dev/null
+++ b/include/linux/regulator/s2dos05.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+// s2dos05.h
+//
+// Copyright (c) 2016 Samsung Electronics Co., Ltd
+//              http://www.samsung.com
+// Copyright (C) 2024 Dzmitry Sankouski <dsankouski@...il.com>
+
+#ifndef __LINUX_S2DOS05_H
+#define __LINUX_S2DOS05_H
+
+// S2DOS05 registers
+// Slave Addr : 0xC0
+enum S2DOS05_reg {
+	S2DOS05_REG_DEV_ID,
+	S2DOS05_REG_TOPSYS_STAT,
+	S2DOS05_REG_STAT,
+	S2DOS05_REG_EN,
+	S2DOS05_REG_LDO1_CFG,
+	S2DOS05_REG_LDO2_CFG,
+	S2DOS05_REG_LDO3_CFG,
+	S2DOS05_REG_LDO4_CFG,
+	S2DOS05_REG_BUCK_CFG,
+	S2DOS05_REG_BUCK_VOUT,
+	S2DOS05_REG_IRQ_MASK = 0x0D,
+	S2DOS05_REG_SSD_TSD = 0x0E,
+	S2DOS05_REG_OCL = 0x10,
+	S2DOS05_REG_IRQ = 0x11
+};
+
+// S2DOS05 regulator ids
+enum S2DOS05_regulators {
+	S2DOS05_LDO1,
+	S2DOS05_LDO2,
+	S2DOS05_LDO3,
+	S2DOS05_LDO4,
+	S2DOS05_BUCK1,
+	S2DOS05_REG_MAX,
+};
+
+#define S2DOS05_IRQ_PWRMT_MASK	BIT(5)
+#define S2DOS05_IRQ_TSD_MASK	BIT(4)
+#define S2DOS05_IRQ_SSD_MASK	BIT(3)
+#define S2DOS05_IRQ_SCP_MASK	BIT(2)
+#define S2DOS05_IRQ_UVLO_MASK	BIT(1)
+#define S2DOS05_IRQ_OCD_MASK	BIT(0)
+
+#define S2DOS05_BUCK_MIN1	506250
+#define S2DOS05_LDO_MIN1	1500000
+#define S2DOS05_LDO_MIN2	2700000
+#define S2DOS05_BUCK_STEP1	6250
+#define S2DOS05_LDO_STEP1	25000
+#define S2DOS05_LDO_VSEL_MASK	0x7F
+#define S2DOS05_LDO_FD_MASK	0x80
+#define S2DOS05_BUCK_VSEL_MASK	0xFF
+#define S2DOS05_BUCK_FD_MASK	0x08
+
+#define S2DOS05_ENABLE_MASK_L1	BIT(0)
+#define S2DOS05_ENABLE_MASK_L2	BIT(1)
+#define S2DOS05_ENABLE_MASK_L3	BIT(2)
+#define S2DOS05_ENABLE_MASK_L4	BIT(3)
+#define S2DOS05_ENABLE_MASK_B1	BIT(4)
+
+#define S2DOS05_RAMP_DELAY	12000
+
+#define S2DOS05_ENABLE_TIME_LDO		50
+#define S2DOS05_ENABLE_TIME_BUCK	350
+
+#define S2DOS05_LDO_N_VOLTAGES	(S2DOS05_LDO_VSEL_MASK + 1)
+#define S2DOS05_BUCK_N_VOLTAGES (S2DOS05_BUCK_VSEL_MASK + 1)
+
+#define S2DOS05_REGULATOR_MAX	(S2DOS05_REG_MAX)
+
+#endif // __LINUX_S2DOS05_H

-- 
2.39.2

Powered by blists - more mailing lists