lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <2itivkfhp7s2dzmihtlo67w53wpdiukmmrcf625isex5rrtu23@4naen2rzimxw>
Date: Fri, 13 Sep 2024 11:53:38 +0200
From: Andi Shyti <andi.shyti@...nel.org>
To: Wolfram Sang <wsa+renesas@...g-engineering.com>
Cc: linux-i2c <linux-i2c@...r.kernel.org>, 
	lkml <linux-kernel@...r.kernel.org>, Andi Shyti <andi.shyti@...nel.org>
Subject: [GIT PULL] i2c-host-fixes for v6.11-rc8

Hi Wolfram,

Here’s the fixes pull request. It’s funny, after a few weeks with
no fixes, right at the merge window, I’m sending in five!

I’ve also brought in from the past two fixes from Robert Hancock
for the Xilinx controller.

See you later today for the next pull request.

Thanks,
Andi

The following changes since commit da3ea35007d0af457a0afc87e84fddaebc4e0b63:

  Linux 6.11-rc7 (2024-09-08 14:50:28 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git tags/i2c-host-fixes-6.11-rc8

for you to fetch changes up to e2c85d85a05f16af2223fcc0195ff50a7938b372:

  i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq() (2024-09-12 09:08:22 +0200)

----------------------------------------------------------------
The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.

The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.

The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.

The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.

----------------------------------------------------------------
Andy Shevchenko (1):
      i2c: isch: Add missed 'else'

Jinjie Ruan (1):
      i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()

Robert Hancock (2):
      i2c: xiic: Wait for TX empty to avoid missed TX NAKs
      i2c: xiic: Try re-initialization on bus busy timeout

Tommy Huang (1):
      i2c: aspeed: Update the stop sw state when the bus recovery occurs

 drivers/i2c/busses/i2c-aspeed.c    | 16 ++++++++--------
 drivers/i2c/busses/i2c-isch.c      |  3 +--
 drivers/i2c/busses/i2c-qcom-geni.c |  4 +---
 drivers/i2c/busses/i2c-xiic.c      | 60 +++++++++++++++++++++++++++++++++++-------------------------
 4 files changed, 45 insertions(+), 38 deletions(-)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ