| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240913121152.817575-3-jan.dakinevich@salutedevices.com>
Date: Fri, 13 Sep 2024 15:11:49 +0300
From: Jan Dakinevich <jan.dakinevich@...utedevices.com>
To: Jan Dakinevich <jan.dakinevich@...utedevices.com>, Conor Dooley
<conor+dt@...nel.org>, <devicetree@...r.kernel.org>, Jerome Brunet
<jbrunet@...libre.com>, Kevin Hilman <khilman@...libre.com>, "Krzysztof
Kozlowski" <krzk+dt@...nel.org>, <linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-clk@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Martin Blumenstingl
<martin.blumenstingl@...glemail.com>, Michael Turquette
<mturquette@...libre.com>, Neil Armstrong <neil.armstrong@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>, Rob Herring <robh@...nel.org>,
Stephen Boyd <sboyd@...nel.org>
Subject: [RFC PATCH v4 2/5] clk: meson: axg: share the set of audio helper macro
These macro will be used in upcoming audio clock controller
for Meson A1 SoC.
Signed-off-by: Jan Dakinevich <jan.dakinevich@...utedevices.com>
---
drivers/clk/meson/axg-audio.c | 138 +-----------------------------
drivers/clk/meson/meson-audio.h | 143 ++++++++++++++++++++++++++++++++
2 files changed, 144 insertions(+), 137 deletions(-)
create mode 100644 drivers/clk/meson/meson-audio.h
diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
index beda86349389..0d911e06a29f 100644
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include "meson-clkc-utils.h"
+#include "meson-audio.h"
#include "axg-audio.h"
#include "clk-regmap.h"
#include "clk-phase.h"
@@ -23,52 +24,6 @@
#include <dt-bindings/clock/axg-audio-clkc.h>
-#define AUD_GATE(_name, _reg, _bit, _pname, _iflags) { \
- .data = &(struct clk_regmap_gate_data){ \
- .offset = (_reg), \
- .bit_idx = (_bit), \
- }, \
- .hw.init = &(struct clk_init_data) { \
- .name = "aud_"#_name, \
- .ops = &clk_regmap_gate_ops, \
- .parent_names = (const char *[]){ #_pname }, \
- .num_parents = 1, \
- .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \
- }, \
-}
-
-#define AUD_MUX(_name, _reg, _mask, _shift, _dflags, _pdata, _iflags) { \
- .data = &(struct clk_regmap_mux_data){ \
- .offset = (_reg), \
- .mask = (_mask), \
- .shift = (_shift), \
- .flags = (_dflags), \
- }, \
- .hw.init = &(struct clk_init_data){ \
- .name = "aud_"#_name, \
- .ops = &clk_regmap_mux_ops, \
- .parent_data = _pdata, \
- .num_parents = ARRAY_SIZE(_pdata), \
- .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \
- }, \
-}
-
-#define AUD_DIV(_name, _reg, _shift, _width, _dflags, _pname, _iflags) { \
- .data = &(struct clk_regmap_div_data){ \
- .offset = (_reg), \
- .shift = (_shift), \
- .width = (_width), \
- .flags = (_dflags), \
- }, \
- .hw.init = &(struct clk_init_data){ \
- .name = "aud_"#_name, \
- .ops = &clk_regmap_divider_ops, \
- .parent_names = (const char *[]){ #_pname }, \
- .num_parents = 1, \
- .flags = (_iflags), \
- }, \
-}
-
#define AUD_PCLK_GATE(_name, _reg, _bit) { \
.data = &(struct clk_regmap_gate_data){ \
.offset = (_reg), \
@@ -82,97 +37,6 @@
}, \
}
-#define AUD_SCLK_DIV(_name, _reg, _div_shift, _div_width, \
- _hi_shift, _hi_width, _pname, _iflags) { \
- .data = &(struct meson_sclk_div_data) { \
- .div = { \
- .reg_off = (_reg), \
- .shift = (_div_shift), \
- .width = (_div_width), \
- }, \
- .hi = { \
- .reg_off = (_reg), \
- .shift = (_hi_shift), \
- .width = (_hi_width), \
- }, \
- }, \
- .hw.init = &(struct clk_init_data) { \
- .name = "aud_"#_name, \
- .ops = &meson_sclk_div_ops, \
- .parent_names = (const char *[]){ #_pname }, \
- .num_parents = 1, \
- .flags = (_iflags), \
- }, \
-}
-
-#define AUD_TRIPHASE(_name, _reg, _width, _shift0, _shift1, _shift2, \
- _pname, _iflags) { \
- .data = &(struct meson_clk_triphase_data) { \
- .ph0 = { \
- .reg_off = (_reg), \
- .shift = (_shift0), \
- .width = (_width), \
- }, \
- .ph1 = { \
- .reg_off = (_reg), \
- .shift = (_shift1), \
- .width = (_width), \
- }, \
- .ph2 = { \
- .reg_off = (_reg), \
- .shift = (_shift2), \
- .width = (_width), \
- }, \
- }, \
- .hw.init = &(struct clk_init_data) { \
- .name = "aud_"#_name, \
- .ops = &meson_clk_triphase_ops, \
- .parent_names = (const char *[]){ #_pname }, \
- .num_parents = 1, \
- .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \
- }, \
-}
-
-#define AUD_PHASE(_name, _reg, _width, _shift, _pname, _iflags) { \
- .data = &(struct meson_clk_phase_data) { \
- .ph = { \
- .reg_off = (_reg), \
- .shift = (_shift), \
- .width = (_width), \
- }, \
- }, \
- .hw.init = &(struct clk_init_data) { \
- .name = "aud_"#_name, \
- .ops = &meson_clk_phase_ops, \
- .parent_names = (const char *[]){ #_pname }, \
- .num_parents = 1, \
- .flags = (_iflags), \
- }, \
-}
-
-#define AUD_SCLK_WS(_name, _reg, _width, _shift_ph, _shift_ws, _pname, \
- _iflags) { \
- .data = &(struct meson_sclk_ws_inv_data) { \
- .ph = { \
- .reg_off = (_reg), \
- .shift = (_shift_ph), \
- .width = (_width), \
- }, \
- .ws = { \
- .reg_off = (_reg), \
- .shift = (_shift_ws), \
- .width = (_width), \
- }, \
- }, \
- .hw.init = &(struct clk_init_data) { \
- .name = "aud_"#_name, \
- .ops = &meson_clk_phase_ops, \
- .parent_names = (const char *[]){ #_pname }, \
- .num_parents = 1, \
- .flags = (_iflags), \
- }, \
-}
-
/* Audio Master Clocks */
static const struct clk_parent_data mst_mux_parent_data[] = {
{ .fw_name = "mst_in0", },
diff --git a/drivers/clk/meson/meson-audio.h b/drivers/clk/meson/meson-audio.h
new file mode 100644
index 000000000000..cbcdbd487d4a
--- /dev/null
+++ b/drivers/clk/meson/meson-audio.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+
+#ifndef __MESON_AUDIO_H__
+#define __MESON_AUDIO_H__
+
+#define AUD_GATE(_name, _reg, _bit, _pname, _iflags) { \
+ .data = &(struct clk_regmap_gate_data){ \
+ .offset = (_reg), \
+ .bit_idx = (_bit), \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "aud_"#_name, \
+ .ops = &clk_regmap_gate_ops, \
+ .parent_names = (const char *[]){ #_pname }, \
+ .num_parents = 1, \
+ .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \
+ }, \
+}
+
+#define AUD_MUX(_name, _reg, _mask, _shift, _dflags, _pdata, _iflags) { \
+ .data = &(struct clk_regmap_mux_data){ \
+ .offset = (_reg), \
+ .mask = (_mask), \
+ .shift = (_shift), \
+ .flags = (_dflags), \
+ }, \
+ .hw.init = &(struct clk_init_data){ \
+ .name = "aud_"#_name, \
+ .ops = &clk_regmap_mux_ops, \
+ .parent_data = _pdata, \
+ .num_parents = ARRAY_SIZE(_pdata), \
+ .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \
+ }, \
+}
+
+#define AUD_DIV(_name, _reg, _shift, _width, _dflags, _pname, _iflags) { \
+ .data = &(struct clk_regmap_div_data){ \
+ .offset = (_reg), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .flags = (_dflags), \
+ }, \
+ .hw.init = &(struct clk_init_data){ \
+ .name = "aud_"#_name, \
+ .ops = &clk_regmap_divider_ops, \
+ .parent_names = (const char *[]){ #_pname }, \
+ .num_parents = 1, \
+ .flags = (_iflags), \
+ }, \
+}
+
+#define AUD_SCLK_DIV(_name, _reg, _div_shift, _div_width, \
+ _hi_shift, _hi_width, _pname, _iflags) { \
+ .data = &(struct meson_sclk_div_data) { \
+ .div = { \
+ .reg_off = (_reg), \
+ .shift = (_div_shift), \
+ .width = (_div_width), \
+ }, \
+ .hi = { \
+ .reg_off = (_reg), \
+ .shift = (_hi_shift), \
+ .width = (_hi_width), \
+ }, \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "aud_"#_name, \
+ .ops = &meson_sclk_div_ops, \
+ .parent_names = (const char *[]){ #_pname }, \
+ .num_parents = 1, \
+ .flags = (_iflags), \
+ }, \
+}
+
+#define AUD_TRIPHASE(_name, _reg, _width, _shift0, _shift1, _shift2, \
+ _pname, _iflags) { \
+ .data = &(struct meson_clk_triphase_data) { \
+ .ph0 = { \
+ .reg_off = (_reg), \
+ .shift = (_shift0), \
+ .width = (_width), \
+ }, \
+ .ph1 = { \
+ .reg_off = (_reg), \
+ .shift = (_shift1), \
+ .width = (_width), \
+ }, \
+ .ph2 = { \
+ .reg_off = (_reg), \
+ .shift = (_shift2), \
+ .width = (_width), \
+ }, \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "aud_"#_name, \
+ .ops = &meson_clk_triphase_ops, \
+ .parent_names = (const char *[]){ #_pname }, \
+ .num_parents = 1, \
+ .flags = CLK_DUTY_CYCLE_PARENT | (_iflags), \
+ }, \
+}
+
+#define AUD_PHASE(_name, _reg, _width, _shift, _pname, _iflags) { \
+ .data = &(struct meson_clk_phase_data) { \
+ .ph = { \
+ .reg_off = (_reg), \
+ .shift = (_shift), \
+ .width = (_width), \
+ }, \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "aud_"#_name, \
+ .ops = &meson_clk_phase_ops, \
+ .parent_names = (const char *[]){ #_pname }, \
+ .num_parents = 1, \
+ .flags = (_iflags), \
+ }, \
+}
+
+#define AUD_SCLK_WS(_name, _reg, _width, _shift_ph, _shift_ws, _pname, \
+ _iflags) { \
+ .data = &(struct meson_sclk_ws_inv_data) { \
+ .ph = { \
+ .reg_off = (_reg), \
+ .shift = (_shift_ph), \
+ .width = (_width), \
+ }, \
+ .ws = { \
+ .reg_off = (_reg), \
+ .shift = (_shift_ws), \
+ .width = (_width), \
+ }, \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "aud_"#_name, \
+ .ops = &meson_clk_phase_ops, \
+ .parent_names = (const char *[]){ #_pname }, \
+ .num_parents = 1, \
+ .flags = (_iflags), \
+ }, \
+}
+
+#endif /* __MESON_AUDIO_H__ */
--
2.34.1
Powered by blists - more mailing lists