[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <218d3e02-2d2b-4ec2-93b3-5936f84cf41c@quicinc.com>
Date: Mon, 16 Sep 2024 16:57:08 -0700
From: Unnathi Chalicheemala <quic_uchalich@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>
CC: Konrad Dybcio <konradybcio@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <kernel@...cinc.com>
Subject: Re: [PATCH v2 2/2] firmware: qcom_scm: Support multiple waitq
contexts
On 9/4/2024 2:54 PM, Bjorn Andersson wrote:
> On Thu, Aug 29, 2024 at 03:15:55PM GMT, Unnathi Chalicheemala wrote:
>> Currently, only a single waitqueue context exists, with waitqueue id zero.
>> Multi-waitqueue mechanism is added in firmware to support the case when
>> multiple VMs make SMC calls or single VM making multiple calls on same CPU.
>>
>> When VMs make SMC call, firmware will allocate waitqueue context assuming
>> the SMC call to be a blocking call. SMC calls that cannot acquire resources
>> are returned to sleep in the calling VM. When resource is available, VM
>> will be notified to wake sleeping thread and resume SMC call.
>> SM8650 firmware can allocate two such waitq contexts so create these two
>> waitqueue contexts.
>>
>> Unique waitqueue contexts are supported by a dynamically sized array where
>> each unique wq_ctx is associated with a struct completion variable for easy
>> lookup. To get the number of waitqueue contexts directly from firmware,
>> qcom_scm_query_waitq_cnt() is introduced. On older targets which support
>> only a single waitqueue, wq_cnt is set to 1 as SCM call for
>> query_waitq_cnt() is not implemented for single waitqueue case.
>>
>> Signed-off-by: Unnathi Chalicheemala <quic_uchalich@...cinc.com>
>> ---
>> drivers/firmware/qcom/qcom_scm.c | 82 +++++++++++++++++++++++---------
>> 1 file changed, 60 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
>> index ed51fbb1c065..b2c5505de681 100644
>> --- a/drivers/firmware/qcom/qcom_scm.c
>> +++ b/drivers/firmware/qcom/qcom_scm.c
>> @@ -44,12 +44,13 @@ static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
>> module_param(download_mode, bool, 0);
>>
>> struct qcom_scm {
>> + int wq_cnt;
>
> Does it make sense for this to be negative? Please make it unsigned.
>
> Also, might not be the most significant member of this struct, so
> perhaps you can move it further down?
>
Ack.
>> struct device *dev;
>> struct clk *core_clk;
>> struct clk *iface_clk;
>> struct clk *bus_clk;
>> struct icc_path *path;
>> - struct completion waitq_comp;
>> + struct completion *waitq;
>> struct reset_controller_dev reset;
>>
>> /* control access to the interconnect path */
>> @@ -1850,6 +1851,31 @@ static int qcom_scm_fill_irq_fwspec_params(struct irq_fwspec *fwspec, u32 virq)
>> return 0;
>> }
>>
>> +static int qcom_scm_query_waitq_count(void)
>> +{
>> + bool avail;
>> + int count;
>> + int ret;
>> + struct qcom_scm_desc desc = {
>> + .svc = QCOM_SCM_SVC_WAITQ,
>> + .cmd = QCOM_SCM_WAITQ_GET_INFO,
>> + .owner = ARM_SMCCC_OWNER_SIP
>> + };
>> + struct qcom_scm_res res;
>> +
>> + avail = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_GET_INFO);
>> + if (!avail) {
>> + count = 1;
>> + return count;
>
> count is a local variable, so just return count; and drop the {} please.
>
>
> Perhaps even drop the local boolean variable:
>
> if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_GET_INFO))
> return 1;
>
Ack.
>> + }
>> +
>> + ret = qcom_scm_call_atomic(__scm->dev, &desc, &res);
>> + if (ret)
>
> (Keep this local variable, as that's in line with the style...)
>
>> + return ret;
>> + count = res.result[0] & 0xff;
>> + return count;
>
> Again, return res.result[0] & 0xff; should be sufficient, no need for a
> local variable immediately followed by a return statement.
>
Ack.
>> +}
>> +
>> static int qcom_scm_get_waitq_irq(void)
>> {
>> int ret;
>> @@ -1876,42 +1902,40 @@ static int qcom_scm_get_waitq_irq(void)
>> return ret;
>> }
>>
>> -static int qcom_scm_assert_valid_wq_ctx(u32 wq_ctx)
>> +static struct completion *qcom_scm_get_completion(u32 wq_ctx)
>> {
>> - /* FW currently only supports a single wq_ctx (zero).
>> - * TODO: Update this logic to include dynamic allocation and lookup of
>> - * completion structs when FW supports more wq_ctx values.
>> - */
>> - if (wq_ctx != 0) {
>> - dev_err(__scm->dev, "Firmware unexpectedly passed non-zero wq_ctx\n");
>> - return -EINVAL;
>> - }
>> + struct completion *wq;
>>
>> - return 0;
>> + if (wq_ctx >= __scm->wq_cnt)
>
> I'm guessing that we're not expecting to ever hit this, but if we do, we
> will fail a qcom_scm_call() or qcom_scm_call_atomic() call, giving
> someone down the road a bad week of debugging...
>
> How about wrapping the conditional in a WARN_ON_ONCE()?
>
Yes understood, ack.
>> + return ERR_PTR(-EINVAL);
>> +
>> + wq = &__scm->waitq[wq_ctx];
>> +
>> + return wq;
>> }
>>
>> int qcom_scm_wait_for_wq_completion(u32 wq_ctx)
>> {
>> - int ret;
>> + struct completion *wq;
>>
>> - ret = qcom_scm_assert_valid_wq_ctx(wq_ctx);
>> - if (ret)
>> - return ret;
>> + wq = qcom_scm_get_completion(wq_ctx);
>> + if (IS_ERR(wq))
>> + return PTR_ERR(wq);
>>
>> - wait_for_completion(&__scm->waitq_comp);
>> + wait_for_completion(wq);
>>
>> return 0;
>> }
>>
>> static int qcom_scm_waitq_wakeup(unsigned int wq_ctx)
>> {
>> - int ret;
>> + struct completion *wq;
>>
>> - ret = qcom_scm_assert_valid_wq_ctx(wq_ctx);
>> - if (ret)
>> - return ret;
>> + wq = qcom_scm_get_completion(wq_ctx);
>> + if (IS_ERR(wq))
>> + return PTR_ERR(wq);
>>
>> - complete(&__scm->waitq_comp);
>> + complete(wq);
>>
>> return 0;
>> }
>> @@ -1948,6 +1972,7 @@ static int qcom_scm_probe(struct platform_device *pdev)
>> struct qcom_tzmem_pool_config pool_config;
>> struct qcom_scm *scm;
>> int irq, ret;
>> + int i;
>>
>> scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
>> if (!scm)
>> @@ -1958,7 +1983,6 @@ static int qcom_scm_probe(struct platform_device *pdev)
>> if (ret < 0)
>> return ret;
>>
>> - init_completion(&scm->waitq_comp);
>> mutex_init(&scm->scm_bw_lock);
>>
>> scm->path = devm_of_icc_get(&pdev->dev, NULL);
>> @@ -1993,6 +2017,20 @@ static int qcom_scm_probe(struct platform_device *pdev)
>> /* Let all above stores be available after this */
>> smp_store_release(&__scm, scm);
>
> Should have spotted this earlier... But if any code below this point
> takes an error path (i.e. we return non-0 from hereon) devres will free
> __scm and anyone calling the qcom_scm API will hit a use-after-free.
>
> Add to that it doesn't seem like a good idea to have
> qcom_scm_is_available() return true until we have setup the wait queue
> count or setup tzmem at least.
>
Would the other calls that go through error path below need to be before the smp_store_release?
Just wondering if that needs to be fixed in a separate patch..
And I think the waitq initialization before the smp_store_release should be okay.
>>
>> + platform_set_drvdata(pdev, scm);
>
> I believe this is a leftover from previous versions of this patch?
>
Yes, will remove this.
> Regards,
> Bjorn
>
>> + ret = qcom_scm_query_waitq_count();
>> + if (ret < 0)
>> + return ret;
>> +
>> + scm->wq_cnt = ret;
>> +
>> + scm->waitq = devm_kcalloc(&pdev->dev, scm->wq_cnt, sizeof(*scm->waitq), GFP_KERNEL);
>> + if (!scm->waitq)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < scm->wq_cnt; i++)
>> + init_completion(&scm->waitq[i]);
>> +
>> irq = qcom_scm_get_waitq_irq();
>> if (irq < 0) {
>> if (irq != -ENXIO)
>> --
>> 2.34.1
>>
>
Powered by blists - more mailing lists