lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <58e9506d-cb27-4808-bc73-422af4154fa1@kernel.org>
Date: Mon, 16 Sep 2024 11:05:15 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: arturs.artamonovs@...log.com, Catalin Marinas <catalin.marinas@....com>,
 Will Deacon <will@...nel.org>, Greg Malysa <greg.malysa@...esys.com>,
 Philipp Zabel <p.zabel@...gutronix.de>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Utsav Agarwal <Utsav.Agarwal@...log.com>,
 Michael Turquette <mturquette@...libre.com>, Stephen Boyd
 <sboyd@...nel.org>, Linus Walleij <linus.walleij@...aro.org>,
 Bartosz Golaszewski <brgl@...ev.pl>, Thomas Gleixner <tglx@...utronix.de>,
 Andi Shyti <andi.shyti@...nel.org>,
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
 Jiri Slaby <jirislaby@...nel.org>, Arnd Bergmann <arnd@...db.de>,
 Olof Johansson <olof@...om.net>, soc@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
 devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
 linux-gpio@...r.kernel.org, linux-i2c@...r.kernel.org,
 linux-serial@...r.kernel.org, adsp-linux@...log.com,
 Nathan Barrett-Morrison <nathan.morrison@...esys.com>
Subject: Re: [PATCH 00/21] Adding support of ADI ARMv8 ADSP-SC598 SoC.

On 12/09/2024 20:24, Arturs Artamonovs via B4 Relay wrote:
> This set of patches based on ADI fork of Linux Kerenl that support family of ADSP-SC5xx
> SoC's and used by customers for some time . Patch series contains minimal set
> of changes to add ADSP-SC598 support to upstream kernel. This series include
> UART,I2C,IRQCHIP,RCU drivers and device-tree to be able boot on EV-SC598-SOM
> board into serial shell and able to reset the board. Current SOM board
> requires I2C expander to enable UART output.
> 
> UART,I2C and PINCTRL drivers are based on old Blackfin drivers with
> ADSP-SC5xx related bug fixes and improvments.
> 
> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@...log.com>
> ---

For new platform, be sure you have 0 warnings:
1. Please run standard kernel tools for static analysis, like
coccinelle, smatch and sparse, and fix reported warnings.

2. Also check for warnings when building with W=1. Most of these
commands (checks or W=1 build) can build specific targets, like some
directory, to narrow the scope to only your code. The code here looks
like it needs a fix. Feel free to get in touch if the warning is not clear.

3. Fix all compile test warning reported by LKP and check for common
configs, regardless of reports.

4. Please run `make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

5. Please run scripts/checkpatch.pl and fix reported warnings. Then
please run `scripts/checkpatch.pl --strict` and (probably) fix more
warnings. Some warnings can be ignored, especially from --strict run.


Best regards,
Krzysztof


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ