[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240916172642.7814-4-johan+linaro@kernel.org>
Date: Mon, 16 Sep 2024 19:26:42 +0200
From: Johan Hovold <johan+linaro@...nel.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jiri Slaby <jirislaby@...nel.org>,
Douglas Anderson <dianders@...omium.org>,
linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH 3/3] serial: qcom-geni: fix receiver enable
The receiver should be enabled in the startup() callback and there is no
need to stop it on every termios update.
Since commit 6f3c3cafb115 ("serial: qcom-geni: disable interrupts during
console writes") the calls to manipulate the secondary interrupts, which
were done without holding the port lock, can lead to the receiver being
left disabled when set_termios() races with the console code (e.g. when
init opens the tty during boot).
Fixes: 6f3c3cafb115 ("serial: qcom-geni: disable interrupts during console writes")
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
drivers/tty/serial/qcom_geni_serial.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 88ad5a6e7de2..85c2742e6cc4 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1167,6 +1167,11 @@ static int qcom_geni_serial_startup(struct uart_port *uport)
if (ret)
return ret;
}
+
+ uart_port_lock_irq(uport);
+ qcom_geni_serial_start_rx(uport);
+ uart_port_unlock_irq(uport);
+
enable_irq(uport->irq);
return 0;
@@ -1252,7 +1257,6 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
unsigned int avg_bw_core;
unsigned long timeout;
- qcom_geni_serial_stop_rx(uport);
/* baud rate */
baud = uart_get_baud_rate(uport, termios, old, 300, 4000000);
@@ -1268,7 +1272,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
dev_err(port->se.dev,
"Couldn't find suitable clock rate for %u\n",
baud * sampling_rate);
- goto out_restart_rx;
+ return;
}
dev_dbg(port->se.dev, "desired_rate = %u, clk_rate = %lu, clk_div = %u\n",
@@ -1359,8 +1363,6 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG);
-out_restart_rx:
- qcom_geni_serial_start_rx(uport);
}
#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
--
2.44.2
Powered by blists - more mailing lists