linux-kernel - [PATCH v4 3/5] dt-bindings: mtd: spi-nor: add OTP parameters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240917094956.437078-4-erezgeva@nwtime.org>
Date: Tue, 17 Sep 2024 11:49:54 +0200
From: Erez Geva <erezgeva@...ime.org>
To: linux-mtd@...ts.infradead.org,
	Tudor Ambarus <tudor.ambarus@...aro.org>,
	Pratyush Yadav <pratyush@...nel.org>,
	Michael Walle <mwalle@...nel.org>
Cc: linux-kernel@...r.kernel.org,
	Miquel Raynal <miquel.raynal@...tlin.com>,
	Richard Weinberger <richard@....at>,
	Vignesh Raghavendra <vigneshr@...com>,
	devicetree@...r.kernel.org,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Esben Haabendal <esben@...nix.com>,
	Erez Geva <ErezGeva2@...il.com>
Subject: [PATCH v4 3/5] dt-bindings: mtd: spi-nor: add OTP parameters

From: Erez Geva <ErezGeva2@...il.com>

Some flash devices need OTP parameters in device tree.
As we can not deduce the parameters based on JEDEC ID or SFDP.

Signed-off-by: Erez Geva <ErezGeva2@...il.com>
---
 .../bindings/mtd/jedec,spi-nor.yaml           | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 6e3afb42926e..d502b7fab2ce 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -90,6 +90,43 @@ properties:
       the SRWD bit while writing the status register. WP# signal hard strapped to GND
       can be a valid use case.
 
+  opt_n_regions:
+    type: u32
+    description:
+      Some flash devices need OTP parameters in the device tree.
+      As we can not deduce the parameters based on JEDEC ID or SFDP.
+      This parameter indicates the number of OTP regions.
+      The value must be larger than 1 and mandatory for OTP.
+
+  otp_len:
+    type: u32
+    description:
+      Some flash devices need OTP parameters in the device tree.
+      As we can not deduce the parameters based on JEDEC ID or SFDP.
+      This parameter indicates the size (length) in bytes of an OTP region.
+      Currently the driver supports symmetric OTP,
+       which means all regions must use the same size.
+      The value must be positive and mandatory for OTP.
+
+  otp_offset:
+    type: u32
+    description:
+      Some flash devices need OTP parameters in the device tree.
+      As we can not deduce the parameters based on JEDEC ID or SFDP.
+      This parameter indicates the offset in bytes of
+       an OTP region relative to its previous.
+      User can omit it if the offset equals the length.
+      Or in case we have a single OTP region.
+
+  otp_base:
+    type: u32
+    description:
+      Some flash devices need OTP parameters in the device tree.
+      As we can not deduce the parameters based on JEDEC ID or SFDP.
+      This parameter indicates the base in bytes of the first OTP region.
+      User can omit it if the base is zero.
+      I.e. the address of the first OTP region starts from 0.
+
   reset-gpios:
     description:
       A GPIO line connected to the RESET (active low) signal of the device.
-- 
2.39.5