[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240917094956.437078-6-erezgeva@nwtime.org>
Date: Tue, 17 Sep 2024 11:49:56 +0200
From: Erez Geva <erezgeva@...ime.org>
To: linux-mtd@...ts.infradead.org,
Tudor Ambarus <tudor.ambarus@...aro.org>,
Pratyush Yadav <pratyush@...nel.org>,
Michael Walle <mwalle@...nel.org>
Cc: linux-kernel@...r.kernel.org,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
devicetree@...r.kernel.org,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Esben Haabendal <esben@...nix.com>,
Erez Geva <ErezGeva2@...il.com>
Subject: [PATCH v4 5/5] mtd: spi-nor: macronix: add manufacturer flags
From: Erez Geva <ErezGeva2@...il.com>
Add flag for always trying reading SFDP:
All new chips from Macronix support SFDP.
All old chips in the IDs table were reused by new chips.
Add flag for reading OTP parameters from device tree.
As Macronix reuse JEDEC IDs, there is no way to determine OTP parameters.
Allow users to define the OTP parameters in device tree.
Signed-off-by: Erez Geva <ErezGeva2@...il.com>
---
Notes:
* My initial Macronix OTP code was tested with MX25l12833F.
* As I no longer have that hardware.
* I now testing with MX25L3233F connected to my BeagleBone Black
* through an 8-PIN SOP (200mil).
* The BeagleBone Black runs with Debian GNU/Linux 12.
* And use Kernel 6.6.32-ti-arm32-r5 build with
* arm-linux-gnueabihf-gcc gcc version 12.2.0 (Debian 12.2.0-14).
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
c22016
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
macronix
$ cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
mx25l3205d
$ xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
53464450000101ff00000109300000ffc2000104600000ffffffffffffff
ffffffffffffffffffffffffffffffffffffe520f1ffffffff0144eb086b
083b04bbeeffffffffff00ffffff00ff0c200f5210d800ffffffffffffff
ffffffffffff003650269ef97764fecfffffffffffff
$ sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
22d5d34af77c3628300056a0fc4bfbeafa027f544998852cf27f7cebf7881196 /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
$ cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
Supported read modes by the flash
1S-1S-1S
opcode 0x03
mode cycles 0
dummy cycles 0
1S-1S-2S
opcode 0x3b
mode cycles 0
dummy cycles 8
1S-2S-2S
opcode 0xbb
mode cycles 0
dummy cycles 4
1S-1S-4S
opcode 0x6b
mode cycles 0
dummy cycles 8
1S-4S-4S
opcode 0xeb
mode cycles 2
dummy cycles 4
Supported page program modes by the flash
1S-1S-1S
opcode 0x02
$ cat /sys/kernel/debug/spi-nor/spi0.0/params
name mx25l3205d
id c2 20 16 c2 20 16
size 4.00 MiB
write size 1
page size 256
address nbytes 3
flags HAS_16BIT_SR
opcodes
read 0x03
dummy cycles 0
erase 0x20
program 0x02
8D extension none
protocols
read 1S-1S-1S
write 1S-1S-1S
register 1S-1S-1S
erase commands
20 (4.00 KiB) [1]
52 (32.0 KiB) [2]
d8 (64.0 KiB) [3]
c7 (4.00 MiB)
sector map
region (in hex) | erase mask | flags
------------------+------------+----------
00000000-003fffff | [ 123] |
# mtd_debug info /dev/mtd0
mtd.type = MTD_NORFLASH
mtd.flags = MTD_CAP_NORFLASH
mtd.size = 4194304 (4M)
mtd.erasesize = 4096 (4K)
mtd.writesize = 1
mtd.oobsize = 0
regions = 0
* The BeagleBone Black SPI is very slow, Tests are slow.
# dd if=/dev/urandom of=./spi_test bs=1M count=2
2+0 records in
2+0 records out
2097152 bytes (2.1 MB, 2.0 MiB) copied, 0.0682607 s, 30.7 MB/s
# time mtd_debug erase /dev/mtd0 0 2097152
Erased 2097152 bytes from address 0x00000000 in flash
real 0m12.703s
user 0m0.000s
sys 0m12.692s
# time mtd_debug read /dev/mtd0 0 2097152 spi_read
Copied 2097152 bytes from address 0x00000000 in flash to spi_read
real 0m1.942s
user 0m0.000s
sys 0m0.053s
# hexdump spi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0200000
# sha256sum spi_read
4bda3a28f4ffe603c0ec1258c0034d65a1a0d35ab7bd523a834608adabf03cc5 spi_read
# time mtd_debug write /dev/mtd0 0 2097152 spi_test
Copied 2097152 bytes from spi_test to address 0x00000000 in flash
real 0m5.883s
user 0m0.006s
sys 0m3.970s
# time mtd_debug read /dev/mtd0 0 2097152 spi_read
Copied 2097152 bytes from address 0x00000000 in flash to spi_read
real 0m2.208s
user 0m0.003s
sys 0m0.063s
# sha256sum spi*
f4f5d1d0a4fef487037cdb3f1be0f9aab68ca32f2dbe8782c927f03adf623ec3 spi_read
f4f5d1d0a4fef487037cdb3f1be0f9aab68ca32f2dbe8782c927f03adf623ec3 spi_test
# time mtd_debug erase /dev/mtd0 0 2097152
Erased 2097152 bytes from address 0x00000000 in flash
real 0m12.126s
user 0m0.001s
sys 0m12.115s
# time mtd_debug read /dev/mtd0 0 2097152 spi_read
Copied 2097152 bytes from address 0x00000000 in flash to spi_read
real 0m2.611s
user 0m0.000s
sys 0m0.064s
# sha256sum spi*
4bda3a28f4ffe603c0ec1258c0034d65a1a0d35ab7bd523a834608adabf03cc5 spi_read
f4f5d1d0a4fef487037cdb3f1be0f9aab68ca32f2dbe8782c927f03adf623ec3 spi_test
* MX25L3233F OTP uses 1 region of size of 4096 bits
$ git diff -U1
diff --git a/arch/arm/boot/dts/ti/omap/BB-SPINOR-00A0.dtso b/arch/arm/boot/dts/ti/omap/BB-SPINOR-00A0.dtso
index 333a6b9556ed..adaddfaa8091 100644
--- a/arch/arm/boot/dts/ti/omap/BB-SPINOR-00A0.dtso
+++ b/arch/arm/boot/dts/ti/omap/BB-SPINOR-00A0.dtso
@@ -63,6 +63,8 @@ channel@0 {
compatible = "jedec,spi-nor";
+ otp_len = <512>;
+ opt_n_regions = <1>;
# flash_otp_info -u /dev/mtd0
Number of OTP user blocks on /dev/mtd0: 1
block 0: offset = 0x0000 size = 512 bytes [unlocked]
# flash_otp_dump -u /dev/mtd0
OTP user data for /dev/mtd0
0x0000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x00a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x00b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x00c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x00d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x00e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x00f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0110: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0120: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0130: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0140: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0150: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0160: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0170: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x0190: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x01a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x01b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x01c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x01d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x01e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0x01f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
* Macronix OTP does not support erase!
* flash_otp_erase
# printf '\xde\xad%.0s' {1..256} | flash_otp_write -u /dev/mtd0 0
Writing OTP user data on /dev/mtd0 at offset 0x0
Wrote 512 bytes of OTP user data
# flash_otp_dump -u /dev/mtd0
OTP user data for /dev/mtd0
0x0000: de ad de ad de ad de ad de ad de ad de ad de ad
0x0010: de ad de ad de ad de ad de ad de ad de ad de ad
0x0020: de ad de ad de ad de ad de ad de ad de ad de ad
0x0030: de ad de ad de ad de ad de ad de ad de ad de ad
0x0040: de ad de ad de ad de ad de ad de ad de ad de ad
0x0050: de ad de ad de ad de ad de ad de ad de ad de ad
0x0060: de ad de ad de ad de ad de ad de ad de ad de ad
0x0070: de ad de ad de ad de ad de ad de ad de ad de ad
0x0080: de ad de ad de ad de ad de ad de ad de ad de ad
0x0090: de ad de ad de ad de ad de ad de ad de ad de ad
0x00a0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00b0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00c0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00d0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00e0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00f0: de ad de ad de ad de ad de ad de ad de ad de ad
0x0100: de ad de ad de ad de ad de ad de ad de ad de ad
0x0110: de ad de ad de ad de ad de ad de ad de ad de ad
0x0120: de ad de ad de ad de ad de ad de ad de ad de ad
0x0130: de ad de ad de ad de ad de ad de ad de ad de ad
0x0140: de ad de ad de ad de ad de ad de ad de ad de ad
0x0150: de ad de ad de ad de ad de ad de ad de ad de ad
0x0160: de ad de ad de ad de ad de ad de ad de ad de ad
0x0170: de ad de ad de ad de ad de ad de ad de ad de ad
0x0180: de ad de ad de ad de ad de ad de ad de ad de ad
0x0190: de ad de ad de ad de ad de ad de ad de ad de ad
0x01a0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01b0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01c0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01d0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01e0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01f0: de ad de ad de ad de ad de ad de ad de ad de ad
# flash_otp_info -u /dev/mtd0
Number of OTP user blocks on /dev/mtd0: 1
block 0: offset = 0x0000 size = 512 bytes [unlocked]
# printf '\xff\xff%.0s' {1..256} | flash_otp_write -u /dev/mtd0 0
Writing OTP user data on /dev/mtd0 at offset 0x0
Wrote 512 bytes of OTP user data
# We cannot overwrite '0' with '1'!
# flash_otp_dump -u /dev/mtd0
OTP user data for /dev/mtd0
0x0000: de ad de ad de ad de ad de ad de ad de ad de ad
0x0010: de ad de ad de ad de ad de ad de ad de ad de ad
0x0020: de ad de ad de ad de ad de ad de ad de ad de ad
0x0030: de ad de ad de ad de ad de ad de ad de ad de ad
0x0040: de ad de ad de ad de ad de ad de ad de ad de ad
0x0050: de ad de ad de ad de ad de ad de ad de ad de ad
0x0060: de ad de ad de ad de ad de ad de ad de ad de ad
0x0070: de ad de ad de ad de ad de ad de ad de ad de ad
0x0080: de ad de ad de ad de ad de ad de ad de ad de ad
0x0090: de ad de ad de ad de ad de ad de ad de ad de ad
0x00a0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00b0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00c0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00d0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00e0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00f0: de ad de ad de ad de ad de ad de ad de ad de ad
0x0100: de ad de ad de ad de ad de ad de ad de ad de ad
0x0110: de ad de ad de ad de ad de ad de ad de ad de ad
0x0120: de ad de ad de ad de ad de ad de ad de ad de ad
0x0130: de ad de ad de ad de ad de ad de ad de ad de ad
0x0140: de ad de ad de ad de ad de ad de ad de ad de ad
0x0150: de ad de ad de ad de ad de ad de ad de ad de ad
0x0160: de ad de ad de ad de ad de ad de ad de ad de ad
0x0170: de ad de ad de ad de ad de ad de ad de ad de ad
0x0180: de ad de ad de ad de ad de ad de ad de ad de ad
0x0190: de ad de ad de ad de ad de ad de ad de ad de ad
0x01a0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01b0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01c0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01d0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01e0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01f0: de ad de ad de ad de ad de ad de ad de ad de ad
# flash_otp_lock -u /dev/mtd0 0 512
About to lock OTP user data on /dev/mtd0 from 0x0 to 0x200
flash_otp_lock: Are you sure? (y/N) y
Done.
# flash_otp_info -u /dev/mtd0
Number of OTP user blocks on /dev/mtd0: 1
block 0: offset = 0x0000 size = 512 bytes [locked]
# printf '\x00\x00%.0s' {1..256} | flash_otp_write -u /dev/mtd0 0
Writing OTP user data on /dev/mtd0 at offset 0x0
write(): Read-only file system
# flash_otp_dump -u /dev/mtd0
OTP user data for /dev/mtd0
0x0000: de ad de ad de ad de ad de ad de ad de ad de ad
0x0010: de ad de ad de ad de ad de ad de ad de ad de ad
0x0020: de ad de ad de ad de ad de ad de ad de ad de ad
0x0030: de ad de ad de ad de ad de ad de ad de ad de ad
0x0040: de ad de ad de ad de ad de ad de ad de ad de ad
0x0050: de ad de ad de ad de ad de ad de ad de ad de ad
0x0060: de ad de ad de ad de ad de ad de ad de ad de ad
0x0070: de ad de ad de ad de ad de ad de ad de ad de ad
0x0080: de ad de ad de ad de ad de ad de ad de ad de ad
0x0090: de ad de ad de ad de ad de ad de ad de ad de ad
0x00a0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00b0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00c0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00d0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00e0: de ad de ad de ad de ad de ad de ad de ad de ad
0x00f0: de ad de ad de ad de ad de ad de ad de ad de ad
0x0100: de ad de ad de ad de ad de ad de ad de ad de ad
0x0110: de ad de ad de ad de ad de ad de ad de ad de ad
0x0120: de ad de ad de ad de ad de ad de ad de ad de ad
0x0130: de ad de ad de ad de ad de ad de ad de ad de ad
0x0140: de ad de ad de ad de ad de ad de ad de ad de ad
0x0150: de ad de ad de ad de ad de ad de ad de ad de ad
0x0160: de ad de ad de ad de ad de ad de ad de ad de ad
0x0170: de ad de ad de ad de ad de ad de ad de ad de ad
0x0180: de ad de ad de ad de ad de ad de ad de ad de ad
0x0190: de ad de ad de ad de ad de ad de ad de ad de ad
0x01a0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01b0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01c0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01d0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01e0: de ad de ad de ad de ad de ad de ad de ad de ad
0x01f0: de ad de ad de ad de ad de ad de ad de ad de ad
* Test that mimic old Macronix chip lack SFDP.
* In order to check how will the driver cope with an old Macronix chip.
* As we do not posses such an old chip, we will change RDSFDP to an unused opcode.
$ git diff -U0
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 4ebc527aadc1..784cba9b2d0d 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -47 +47 @@
-#define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */
+#define SPINOR_OP_RDSFDP 0x57 /* Read SFDP */
# dmesg | grep spi
[ 42.436974] spi-nor spi0.0: mx25l3205d (4096 Kbytes)
* No error in kernel log!
# ls /sys/bus/spi/devices/spi0.0/spi-nor/
jedec_id manufacturer partname
* No SFDP, as expected!
$ cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
Supported read modes by the flash
1S-1S-1S
opcode 0x03
mode cycles 0
dummy cycles 0
Supported page program modes by the flash
1S-1S-1S
opcode 0x02
$ cat /sys/kernel/debug/spi-nor/spi0.0/params
name mx25l3205d
id c2 20 16 c2 20 16
size 4.00 MiB
write size 1
page size 256
address nbytes 3
flags HAS_16BIT_SR
opcodes
read 0x03
dummy cycles 0
erase 0x20
program 0x02
8D extension none
protocols
read 1S-1S-1S
write 1S-1S-1S
register 1S-1S-1S
erase commands
20 (4.00 KiB) [0]
d8 (64.0 KiB) [1]
c7 (4.00 MiB)
sector map
region (in hex) | erase mask | flags
------------------+------------+----------
00000000-003fffff | [01 ] |
drivers/mtd/spi-nor/macronix.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 02aa844d641b..f79033e9efa5 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -375,4 +375,5 @@ const struct spi_nor_manufacturer spi_nor_macronix = {
.parts = macronix_nor_parts,
.nparts = ARRAY_SIZE(macronix_nor_parts),
.fixups = ¯onix_nor_fixups,
+ .flags = SPI_NOR_MANUFACT_TRY_SFDP | SPI_NOR_MANUFACT_DT_OTP,
};
--
2.39.5
Powered by blists - more mailing lists