[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org>
Date: Tue, 17 Sep 2024 14:49:55 +0100
From: Daniel Golle <daniel@...rotopia.org>
To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Daniel Golle <daniel@...rotopia.org>,
Christian Marangi <ansuelsmth@...il.com>,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
Robert Marko <robimarko@...il.com>,
Russell King <rmk+kernel@...linux.org.uk>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH net 2/2] net: phy: aquantia: fix applying active_low bit
after reset
for_each_set_bit was used wrongly in aqr107_config_init() when iterating
over LEDs. Drop misleading 'index' variable and call
aqr_phy_led_active_low_set() for each set bit representing an LED which
is driven by VDD instead of GND pin.
Fixes: 61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@...rotopia.org>
---
drivers/net/phy/aquantia/aquantia_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index e982e9ce44a59..650df261eea8e 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -478,7 +478,7 @@ static int aqr107_config_init(struct phy_device *phydev)
{
struct aqr107_priv *priv = phydev->priv;
u32 led_active_low;
- int ret, index = 0;
+ int ret;
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
@@ -505,10 +505,9 @@ static int aqr107_config_init(struct phy_device *phydev)
/* Restore LED polarity state after reset */
for_each_set_bit(led_active_low, &priv->leds_active_low, AQR_MAX_LEDS) {
- ret = aqr_phy_led_active_low_set(phydev, index, led_active_low);
+ ret = aqr_phy_led_active_low_set(phydev, led_active_low, true);
if (ret)
return ret;
- index++;
}
return 0;
--
2.46.1
Powered by blists - more mailing lists