| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240917232932.3641992-5-chris.packham@alliedtelesis.co.nz>
Date: Wed, 18 Sep 2024 11:29:31 +1200
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: andi.shyti@...nel.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
tsbogend@...ha.franken.de
Cc: linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org,
Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [PATCH 4/5] dt-bindings: i2c: Add RTL9300 I2C multiplexer
An extension of the RTL9300 SoC is to support multiplexing by selecting
the SDA pins that are being used dynamically. Add a binding that allows
us to describe hardware that makes use of this.
Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
.../bindings/i2c/realtek,rtl9300-i2c-mux.yaml | 82 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.yaml
diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.yaml
new file mode 100644
index 000000000000..a64879d0fda7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/realtek,rtl9300-i2c-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL I2C Multiplexer
+
+maintainers:
+ - Chris Packham <chris.packham@...iedtelesis.co.nz>
+
+description: |
+ The I2C controllers on the RTL9300 support a level of multiplexing. In the
+ simple case the rtl9300-i2c binding can provide a single SDA pin per
+ controller. This binding allows a more than one SDA line to be used per
+ controller providing a level of multiplexing.
+
+properties:
+ compatible:
+ const: realtek,rtl9300-i2c-mux
+
+ i2c-parent:
+ description: phandle of the I2C bus controller that this multiplexer
+ operates on.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+ - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - i2c-parent
+
+examples:
+ - |
+ switch@...00000 {
+ compatible = "realtek,rtl9302c-switch", "syscon", "simple-mfd";
+ reg = <0x1b000000 0x10000>;
+
+ i2c0: i2c@36c {
+ compatible = "realtek,rtl9300-i2c";
+ realtek,control-offset = <0x36c>;
+ realtek,global-control-offset = <0x384>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ base {
+ i2c-mux {
+ compatible = "realtek,rtl9300-i2c-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9e123e9839a5..178ac8a7e843 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19891,6 +19891,7 @@ RTL9300 I2C DRIVER (rtl9300-i2c)
M: Chris Packham <chris.packham@...iedtelesis.co.nz>
L: linux-i2c@...r.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c-mux.yaml
F: Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
F: drivers/i2c/busses/i2c-rtl9300.c
--
2.46.1
Powered by blists - more mailing lists