| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZurYh47gu4MCPVuY@localhost.localdomain>
Date: Wed, 18 Sep 2024 15:41:27 +0200
From: Louis Chauvet <louis.chauvet@...tlin.com>
To: José Expósito <jose.exposito89@...il.com>
Cc: airlied@...il.com, daniel@...ll.ch, dri-devel@...ts.freedesktop.org,
hamohammed.sa@...il.com, linux-kernel@...r.kernel.org,
maarten.lankhorst@...ux.intel.com, mairacanal@...eup.net,
melissa.srw@...il.com, mripard@...nel.org,
rodrigosiqueiramelo@...il.com, thomas.petazzoni@...tlin.com,
tzimmermann@...e.de
Subject: Re: [PATCH] drm/vkms: Remove index parameter from init_vkms_output
Le 17/09/24 - 18:02, José Expósito a écrit :
> Hi Louis,
>
> > VKMS currently supports only one CRTC, so it make no sense to have this
> > index configurable. To avoid issues, replace this hardcoded index by
> > drm_crtc_mask when applicable.
> >
> > There is no need to manually set a crtc mask on primary and cursor plane
> > as it is automatically set by drmm_crtc_alloc_with_planes.
> >
> > In addition, this will remove the use of an uninitialized structure in
> > vkms_add_overlay_plane. This currently works by chance because two things:
> > - vkms_plane_init always set a possible_crtcs value, so the problematic
> > branch is never used;
> > - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
> > always have this id.
> >
> > Signed-off-by: Louis Chauvet <louis.chauvet@...tlin.com>
> > ---
> > drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
> > drivers/gpu/drm/vkms/vkms_drv.h | 4 ++--
> > drivers/gpu/drm/vkms/vkms_output.c | 42 +++++++++++++-------------------------
> > drivers/gpu/drm/vkms/vkms_plane.c | 4 ++--
> > 4 files changed, 19 insertions(+), 33 deletions(-)
> >
> >
> > ---
> > base-commit: a6bb1f77a94335de67dba12e7f52651c115b82d2
> > change-id: 20240906-vkms-remove-index-3a6e04c38e02
> >
> > Best regards,
> >
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> > index 0c1a713b7b7b..1226a790bece 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > @@ -172,7 +172,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
> > dev->mode_config.preferred_depth = 0;
> > dev->mode_config.helper_private = &vkms_mode_config_helpers;
> >
> > - return vkms_output_init(vkmsdev, 0);
> > + return vkms_output_init(vkmsdev);
> > }
> >
> > static int vkms_create(struct vkms_config *config)
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> > index 5e46ea5b96dc..dac063f11dcd 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > @@ -148,10 +148,10 @@ struct vkms_device {
> > int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> > struct drm_plane *primary, struct drm_plane *cursor);
> >
> > -int vkms_output_init(struct vkms_device *vkmsdev, int index);
> > +int vkms_output_init(struct vkms_device *vkmsdev);
> >
> > struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> > - enum drm_plane_type type, int index);
> > + enum drm_plane_type type);
> >
> > /* CRC Support */
> > const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
> > diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> > index 5ce70dd946aa..a6a942b4f84f 100644
> > --- a/drivers/gpu/drm/vkms/vkms_output.c
> > +++ b/drivers/gpu/drm/vkms/vkms_output.c
> > @@ -31,47 +31,24 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
> > .get_modes = vkms_conn_get_modes,
> > };
> >
> > -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
> > - struct drm_crtc *crtc)
> > -{
> > - struct vkms_plane *overlay;
> > -
> > - overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> > - if (IS_ERR(overlay))
> > - return PTR_ERR(overlay);
> > -
> > - if (!overlay->base.possible_crtcs)
> > - overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> > -
> > - return 0;
> > -}
> > -
> > -int vkms_output_init(struct vkms_device *vkmsdev, int index)
> > +int vkms_output_init(struct vkms_device *vkmsdev)
> > {
> > struct vkms_output *output = &vkmsdev->output;
> > struct drm_device *dev = &vkmsdev->drm;
> > struct drm_connector *connector = &output->connector;
> > struct drm_encoder *encoder = &output->encoder;
> > struct drm_crtc *crtc = &output->crtc;
> > - struct vkms_plane *primary, *cursor = NULL;
> > + struct vkms_plane *primary, *overlay, *cursor = NULL;
> > int ret;
> > int writeback;
> > unsigned int n;
> >
> > - primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
> > + primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
> > if (IS_ERR(primary))
> > return PTR_ERR(primary);
> >
> > - if (vkmsdev->config->overlay) {
> > - for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> > - ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
> > - if (ret)
> > - return ret;
> > - }
> > - }
> > -
> > if (vkmsdev->config->cursor) {
> > - cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> > + cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
> > if (IS_ERR(cursor))
> > return PTR_ERR(cursor);
> > }
> > @@ -80,6 +57,15 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> > if (ret)
> > return ret;
> >
> > + if (vkmsdev->config->overlay) {
> > + for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> > + overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
> > + if (IS_ERR(overlay))
> > + return PTR_ERR(overlay);
>
> At this point the CRTC is initialized and, in case of error, it
> would need to be freed with drm_crtc_cleanup().
>
> Instead of returning, you'd need to jump to "err_connector", which
> would need to be renamed to something else that makes sense.
Thanks for pointing this I missed this, I will fix it for v2!
> Jose
>
> > + overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> > + }
> > + }
> > +
> > ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
> > DRM_MODE_CONNECTOR_VIRTUAL);
> > if (ret) {
> > @@ -95,7 +81,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> > DRM_ERROR("Failed to init encoder\n");
> > goto err_encoder;
> > }
> > - encoder->possible_crtcs = 1;
> > + encoder->possible_crtcs = drm_crtc_mask(crtc);
> >
> > ret = drm_connector_attach_encoder(connector, encoder);
> > if (ret) {
> > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> > index e5c625ab8e3e..ad137c9a75f5 100644
> > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> > @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
> > };
> >
> > struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> > - enum drm_plane_type type, int index)
> > + enum drm_plane_type type)
> > {
> > struct drm_device *dev = &vkmsdev->drm;
> > struct vkms_plane *plane;
> >
> > - plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
> > + plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
> > &vkms_plane_funcs,
> > vkms_formats, ARRAY_SIZE(vkms_formats),
> > NULL, type, NULL);
> >
Powered by blists - more mailing lists