| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240918165008.169917-4-liujianfeng1994@gmail.com>
Date: Thu, 19 Sep 2024 00:50:08 +0800
From: Jianfeng Liu <liujianfeng1994@...il.com>
To: linux-rockchip@...ts.infradead.org
Cc: Stephen Rothwell <sfr@...b.auug.org.au>,
Rob Herring <robh@...nel.org>,
linux-kernel@...r.kernel.org,
Heiko Stuebner <heiko@...ech.de>,
Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org,
Jianfeng Liu <liujianfeng1994@...il.com>,
linux-arm-kernel@...ts.infradead.org,
Krzysztof Kozlowski <krzk+dt@...nel.org>
Subject: [PATCH 3/3] arm64: dts: rockchip: Add ArmSoM W3 board
W3 is the carrier board for LM7 System on Module.
W3 features:
- 1x 2.5GbE Realtek RTL8125 Ethernet
- 2x HDMI Type A out
- 1x HDMI Type A in
- 1x USB 3.1 Type C
- 2x USB 2.0 Type A
- 2x USB 3.0 Type A
- 1x PCIE 2.0 M.2 E Key (1 lane)
- 1x PCIE 3.0 PCIe (4 lanes)
- 1x TF scard slot
- 1x MIPI CSI
- 1x MIPI DSI
- 1x ES8316 audio jack
- 1x FAN connector
- 1x RTC
- 40-pin expansion header
Add support for ArmSoM LM7 board.
Signed-off-by: Jianfeng Liu <liujianfeng1994@...il.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588-armsom-w3.dts | 408 ++++++++++++++++++
2 files changed, 409 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 09423070c99..b0ed12f41f0 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
new file mode 100644
index 00000000000..321a44f081c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3588-armsom-lm7.dtsi"
+
+/ {
+ model = "ArmSoM W3";
+ compatible = "armsom,w3", "armsom,lm7", "rockchip,rk3588";
+
+ aliases {
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ label = "rk3588-es8316";
+
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+
+ dais = <&i2s0_8ch_p0>;
+ hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_rgb_b>;
+
+ led_rgb_b {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led_rgb_r {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 120 150 180 210 240 255>;
+ fan-supply = <&vcc5v0_sys>;
+ pwms = <&pwm1 0 50000 0>;
+ #cooling-cells = <2>;
+ };
+
+ rfkill {
+ compatible = "rfkill-gpio";
+ label = "rfkill-pcie-wlan";
+ radio-type = "wlan";
+ shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+
+ rfkill-bt {
+ compatible = "rfkill-gpio";
+ label = "rfkill-m2-bt";
+ radio-type = "bluetooth";
+ shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+ regulator-name = "vcc3v3_pcie2x1l0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie2x1l2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3_vcc3v3_en>;
+ regulator-name = "vcc3v3_pcie30";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ trips {
+ package_fan0: package-fan0 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&package_fan0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map2 {
+ trip = <&package_fan1>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&pcie2x1l0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_rst>;
+ reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+ status = "okay";
+};
+
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_rst>;
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3_rst>;
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
+ status = "okay";
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_rgb_b: led-rgb-b {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie2 {
+ pcie2_0_rst: pcie2-0-rst {
+ rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_2_rst: pcie2-2-rst {
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie3 {
+ pcie3_rst: pcie3-rst {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&sdmmc {
+ max-frequency = <200000000>;
+ no-sdio;
+ no-mmc;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&sdio {
+ max-frequency = <200000000>;
+ no-sd;
+ no-mmc;
+ non-removable;
+ bus-width = <4>;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ wakeup-source;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_pcie2x1l0>;
+ vqmmc-supply = <&vcc_1v8_s3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdiom0_pins>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ /* connected to USB hub, which is powered by vcc5v0_sys */
+ phy-supply = <&vcc5v0_sys>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&usbdp_phy1 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host2_xhci {
+ status = "okay";
+};
--
2.34.1
Powered by blists - more mailing lists