[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240919075120.328469-2-amitsd@google.com>
Date: Thu, 19 Sep 2024 00:51:13 -0700
From: Amit Sunil Dhamne <amitsd@...gle.com>
To: gregkh@...uxfoundation.org, robh@...nel.org, dmitry.baryshkov@...aro.org,
heikki.krogerus@...ux.intel.com
Cc: badhri@...gle.com, kyletso@...gle.com, rdbabiera@...gle.com,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, Amit Sunil Dhamne <amitsd@...gle.com>
Subject: [RFC v2 1/2] dt-bindings: connector: Add properties to define time values
This commit adds the following properties:
* sink-wait-cap-time-ms
* ps-source-off-time-ms
* cc-debounce-time-ms
This is to enable setting of platform/board specific timer values as
these timers have a range of acceptable values.
Signed-off-by: Amit Sunil Dhamne <amitsd@...gle.com>
---
.../bindings/connector/usb-connector.yaml | 32 ++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index fb216ce68bb3..5efa4ea3c41c 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -253,6 +253,33 @@ properties:
additionalProperties: false
+ sink-wait-cap-time-ms:
+ description: Represents the max time in ms that USB Type-C port (in sink
+ role) should wait for the port partner (source role) to send source caps.
+ SinkWaitCap timer starts when port in sink role attaches to the source.
+ This timer will stop when sink receives PD source cap advertisement before
+ timeout in which case it'll move to capability negotiation stage. A
+ timeout leads to a hard reset message by the port. If no value is set for
+ this property then the driver assumes a default value of PD_T_SINK_WAIT_CAP
+ (defined in include/linux/usb/pd.h).
+
+ ps-source-off-time-ms:
+ description: Represents the max time in ms that a DRP in source role should
+ take to turn off power after the PsSourceOff timer starts. PsSourceOff
+ timer starts when a sink's PHY layer receives EOP of the GoodCRC message
+ (corresponding to an Accept message sent in response to a PR_Swap or a
+ FR_Swap request). This timer stops when last bit of GoodCRC EOP
+ corresponding to the received PS_RDY message is transmitted by the PHY
+ layer. A timeout shall lead to error recovery in the type-c port. If no
+ value is set for this property then the driver assumes a default value of
+ PD_T_PS_SOURCE_OFF (defined in include/linux/usb/pd.h).
+
+ cc-debounce-time-ms:
+ description: Represents the max time in ms that a port shall wait to
+ determine if it's attached to a partner. If no value is set for this
+ property then the driver assumes a default value of PD_T_CC_DEBOUNCE
+ (defined in include/linux/usb/pd.h).
+
dependencies:
sink-vdos-v1: [ sink-vdos ]
sink-vdos: [ sink-vdos-v1 ]
@@ -380,7 +407,7 @@ examples:
};
# USB-C connector attached to a typec port controller(ptn5110), which has
- # power delivery support and enables drp.
+ # power delivery support, explicitly defines time properties and enables drp.
- |
#include <dt-bindings/usb/pd.h>
typec: ptn5110 {
@@ -393,6 +420,9 @@ examples:
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
PDO_VAR(5000, 12000, 2000)>;
op-sink-microwatt = <10000000>;
+ sink-wait-cap-time-ms = <465>;
+ ps-source-off-time-ms = <835>;
+ cc-debounce-time-ms = <101>;
};
};
--
2.46.0.792.g87dc391469-goog
Powered by blists - more mailing lists