[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240919082809.174589-2-d-gole@ti.com>
Date: Thu, 19 Sep 2024 13:58:05 +0530
From: Dhruva Gole <d-gole@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero
Kristo <kristo@...nel.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
"Rafael J
. Wysocki" <rafael@...nel.org>
CC: <linux-pm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
Dhruva Gole <d-gole@...com>, Rob Herring <robh@...nel.org>,
Krzysztof
Kozlowski <krzk+dt@...nel.org>, Bryan Brattlof <bb@...com>
Subject: [PATCH V4 1/6] arm64: dts: ti: k3-am62a: add opp frequencies
From: Bryan Brattlof <bb@...com>
One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)
The OPPs available for the Cortex-A53s on the AM62Ax can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
to only OPP entries the variant supports. A table of all these variants
can be found in it's data sheet[0] for the AM62Ax family.
Add the OPP table into the SoC's fdti file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.
[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf
Signed-off-by: Bryan Brattlof <bb@...com>
---
Link to comment on previous rev:
https://lore.kernel.org/all/20240828131601.6sxvnwpcsb36tz4m@eloquent/
Nishanth, this series has been tested to work on all platforms [1].
I hope that with the revision picking from socinfo and the efuse_offsets
being picked from DT (as they should) there are no longer any major
outstanding concerns on this series?
[1] https://gist.github.com/DhruvaG2000/63f5e28636d52787488f776e5bf39498
---
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 5 ++
arch/arm64/boot/dts/ti/k3-am62a7.dtsi | 51 +++++++++++++++++++++
2 files changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index f5ac101a04df..0b1dd5390cd3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -17,6 +17,11 @@ chipid: chipid@14 {
reg = <0x14 0x4>;
};
+ opp_efuse_table: syscon@18 {
+ compatible = "ti,am62-opp-efuse-table", "syscon";
+ reg = <0x18 0x4>;
+ };
+
cpsw_mac_syscon: ethernet-mac-syscon@200 {
compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index f86a23404e6d..6c99221beb6b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -48,6 +48,8 @@ cpu0: cpu@0 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&a53_opp_table>;
+ clocks = <&k3_clks 135 0>;
};
cpu1: cpu@1 {
@@ -62,6 +64,8 @@ cpu1: cpu@1 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&a53_opp_table>;
+ clocks = <&k3_clks 136 0>;
};
cpu2: cpu@2 {
@@ -76,6 +80,8 @@ cpu2: cpu@2 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&a53_opp_table>;
+ clocks = <&k3_clks 137 0>;
};
cpu3: cpu@3 {
@@ -90,6 +96,51 @@ cpu3: cpu@3 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&a53_opp_table>;
+ clocks = <&k3_clks 138 0>;
+ };
+ };
+
+ a53_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ opp-shared;
+ syscon = <&opp_efuse_table>;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-supported-hw = <0x01 0x0006>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-1250000000 {
+ opp-hz = /bits/ 64 <1250000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ clock-latency-ns = <6000000>;
+ opp-suspend;
};
};
--
2.34.1
Powered by blists - more mailing lists