[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e390ed47-1f24-4911-87f6-a66e45275b6c@kernel.org>
Date: Thu, 19 Sep 2024 16:00:27 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Dzmitry Sankouski <dsankouski@...il.com>
Cc: Sebastian Reichel <sre@...nel.org>, Bjorn Andersson
<andersson@...nel.org>, Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>, Sam Ravnborg <sam@...nborg.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Lee Jones <lee@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>, Pavel Machek <pavel@....cz>,
Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Uwe Kleine-König <ukleinek@...nel.org>,
Chanwoo Choi <cw00.choi@...sung.com>, Simona Vetter <simona@...ll.ch>,
cros-qcom-dts-watchers@...omium.org, Konrad Dybcio <konradybcio@...nel.org>,
Simona Vetter <simona.vetter@...ll.ch>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-input@...r.kernel.org,
linux-leds@...r.kernel.org, linux-pwm@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Subject: Re: [PATCH v4 23/27] arm64: dts: qcom: starqltechn: add display PMIC
On 19/09/2024 15:17, Dzmitry Sankouski wrote:
>>> + pmic@60 {
>>> + compatible = "samsung,s2dos05";
>>> + reg = <0x60>;
>>> +
>>> + regulators {
>>> + s2dos05_ldo1: ldo1 {
>>> + regulator-active-discharge = <1>;
>>> + regulator-enable-ramp-delay = <12000>;
>>> + regulator-min-microvolt = <1500000>;
>>> + regulator-max-microvolt = <2000000>;
>>> + regulator-name = "s2dos05-ldo1";
>>
>> Useless name. Please use rather names from the schematics, but I guess
>> you might not have them, so maybe downstream has reasonable name?
>
> Unfortunately, downstream uses that same name.
Then "ldo1" is enough.
Best regards,
Krzysztof
Powered by blists - more mailing lists