[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <859c1b0e-e9ca-4dfc-a3a2-c5cceec22f26@amperemail.onmicrosoft.com>
Date: Thu, 19 Sep 2024 22:54:07 +0700
From: Chanh Nguyen <chanh@...eremail.onmicrosoft.com>
To: Guenter Roeck <linux@...ck-us.net>, Krzysztof Kozlowski
<krzk@...nel.org>, Rob Herring <robh@...nel.org>,
Chanh Nguyen <chanh@...amperecomputing.com>
Cc: Jean Delvare <jdelvare@...e.com>, Krzysztof Kozlowski
<krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org, OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
Open Source Submission <patches@...erecomputing.com>,
Phong Vo <phong@...amperecomputing.com>,
Thang Nguyen <thang@...amperecomputing.com>,
Quan Nguyen <quan@...amperecomputing.com>,
Khanh Pham <khpham@...erecomputing.com>
Subject: Re: [PATCH] dt-bindings: hwmon: Add adt7462
On 19/09/2024 22:14, Guenter Roeck wrote:
> On 9/19/24 08:02, Chanh Nguyen wrote:
>>
>>
>> On 19/09/2024 17:39, Krzysztof Kozlowski wrote:
>>> [EXTERNAL EMAIL NOTICE: This email originated from an external
>>> sender. Please be mindful of safe email handling and proprietary
>>> information protection practices.]
>>>
>>>
>>> On 19/09/2024 11:43, Chanh Nguyen wrote:
>>>>>> +properties:
>>>>>> + compatible:
>>>>>> + const: onnn,adt7462
>>>>>> +
>>>>>> + reg:
>>>>>> + maxItems: 1
>>>>>> +
>>>>>> + resets:
>>>>>> + maxItems: 1
>>>>>
>>>>> How would this work? 'resets' generally is used for on-chip devices
>>>>> and
>>>>> a reset controller. That doesn't exist at the board level. A
>>>>> standalone
>>>>> device typically uses a GPIO lines if there's a s/w controlled reset.
>>>>> That would be the 'reset-gpios' property.
>>>>>
>>>>
>>>> Thank Rob for your comments! The ADT7462 includes an active low reset
>>>> pin (Pin #14).
>>>>
>>>> I'll change 'resets' into the 'reset-gpios' property.
>>>>
>>>> The example in the binding will be
>>>
>>> The question how did it work in the first place is still valid... I
>>> think we might benefit from asking people to post their upstreamed DTS.
>>> Otherwise we will take broken or half-baked bindings, because we never
>>> saw the bigger picture. :(
>>>
>>
>> Thank Krzysztof,
>>
>> I saw the ADT7462 includes an active low reset pin (Pin #14) to reset
>> device via I/O pin. So, I introduced a reset property follow the
>> device datasheet.
>>
>> But the adt7462 driver has not yet implemented this property. My
>> platform also doesn't design this pin on board, so I don't need it at
>> least now.
>>
>> Anyway, I hope Rob, Guenter and Krzysztof can give me advice on
>> whether I should add this property to the binding?
>>
>
> Not from my perspective, and I won't let you add it to the driver unless
> you can
> actually test it. Really, this is such an old chip that it would make
> more sense
> to just leave its driver alone unless there is a problem with it. Why
> didn't you
> just add the chip to the list of trivial devices ?
>
No Guenter, I don't think I'll change or update anythings to the adt7462
driver. The driver is working fine for me.
I just wonder about this property in the dt-binding. It seems I
shouldn't add the reset property to the dt-binding.
"Why didn't you just add the chip to the list of trivial devices ?" =>
Awesome, I just learned about the trivial-devices.yaml from your
suggestion
(https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/trivial-devices.yaml),
this is thing that I'm finding for the adt7462 binding. Perfect!
I'm looking forward to hearing Rob and Krzysztof's idea. If nothing
else, I'll add this chip to the list of trivial devices in the patch v2.
Thanks,
Chanh
> Guenter
>
Powered by blists - more mailing lists