| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <6ef46128-6046-487e-994f-3f7a5774906d@app.fastmail.com>
Date: Fri, 20 Sep 2024 19:27:12 +1200
From: "Luke Jones" <luke@...nes.dev>
To: "Mario Limonciello" <mario.limonciello@....com>,
platform-driver-x86@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, "Hans de Goede" <hdegoede@...hat.com>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
corentin.chary@...il.com
Subject: Re: [PATCH v3 1/5] platform/x86: asus-armoury: move existing tunings to
asus-armoury module
On Thu, 19 Sep 2024, at 3:37 AM, Mario Limonciello wrote:
> On 9/18/2024 04:42, Luke D. Jones wrote:
> > The fw_attributes_class provides a much cleaner interface to all of the
> > attributes introduced to asus-wmi. This patch moves all of these extra
> > attributes over to fw_attributes_class, and shifts the bulk of these
> > definitions to a new kernel module to reduce the clutter of asus-wmi
> > with the intention of deprecating the asus-wmi attributes in future.
> >
> > The work applies only to WMI methods which don't have a clearly defined
> > place within the sysfs and as a result ended up lumped together in
> > /sys/devices/platform/asus-nb-wmi/ with no standard API.
> >
> > Where possible the fw attrs now implement defaults, min, max, scalar,
> > choices, etc. As en example dgpu_disable becomes:
> >
> > /sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
> > ├── current_value
> > ├── display_name
> > ├── possible_values
> > └── type
> >
> > as do other attributes.
> >
> > Signed-off-by: Luke D. Jones <luke@...nes.dev>
> > ---
> > drivers/platform/x86/Kconfig | 14 +
> > drivers/platform/x86/Makefile | 1 +
> > drivers/platform/x86/asus-armoury.c | 702 +++++++++++++++++++++
> > drivers/platform/x86/asus-armoury.h | 209 ++++++
> > drivers/platform/x86/asus-wmi.c | 69 +-
> > drivers/platform/x86/asus-wmi.h | 14 +
> > include/linux/platform_data/x86/asus-wmi.h | 11 +
> > 7 files changed, 1001 insertions(+), 19 deletions(-)
> > create mode 100644 drivers/platform/x86/asus-armoury.c
> > create mode 100644 drivers/platform/x86/asus-armoury.h
>
> This is kinda a big patch that I feel might have done some justice to
> split into smaller logical pieces. These are much easier to review.
>
> For example:
>
> 1) You've clearly got 3 "groups" of attributes, maybe those should come
> in a separate series each.
> 2) Some of the helper functions that are exported should be exported in
> their own patches (for example asus_wmi_get_devstate_dsts)
> 3) panel_hd_mode is a new attribute not leveraged from asus-wmi AFAICT,
> with a new define. It probably could have been it's own patch to "add
> panel_hd_mode".
Good points yeah. I've split things in to smaller more easily digestible chunks now.
>
> More comments inline below.
>
> >
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index ddfccc226751..d13c4085c228 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -265,6 +265,19 @@ config ASUS_WIRELESS
> > If you choose to compile this driver as a module the module will be
> > called asus-wireless.
> >
> > +config ASUS_ARMOURY
> > + tristate "ASUS Armoury (firmware) Driver"
>
> This is a confusing title to me. What does it convey that just "Asus
> Armoury driver" wouldn't?
Nothing much I guess. Changed now.
> > + depends on ACPI_WMI
> > + depends on ASUS_WMI
> > + select FW_ATTR_CLASS
> > + help
> > + Say Y here if you have a WMI aware Asus laptop and would like to use the
>
> Doesn't it also cover handhelds? I'd probably just say "asus machine".
Indeed yes, changed.
> > + firmware_attributes API to control various settings typically exposed in
> > + the ASUS Armoury Crate application available on Windows.
> > +
> > + To compile this driver as a module, choose M here: the module will
> > + be called asus-armoury.
> > +
> > config ASUS_WMI
> > tristate "ASUS WMI Driver"
> > depends on ACPI_WMI
> > @@ -276,6 +289,7 @@ config ASUS_WMI
> > depends on HOTPLUG_PCI
> > depends on ACPI_VIDEO || ACPI_VIDEO = n
> > depends on SERIO_I8042 || SERIO_I8042 = n
> > + select ASUS_ARMOURY
>
> Two problems:
> 1. Seems to be a circular depedency.
> 2. Selects can't have extra depends or selects (FW_ATTR_CLASS stands out).
>
> I feel this select should just be droped.
Dropped. I wasn't entirely clear on how to use the "select" and "depends on". I think I much better understand how now especially given that I previously didn't know "select" does not honor the "depends on" of what it has selected.
> > select INPUT_SPARSEKMAP
> > select LEDS_CLASS
> > select NEW_LEDS
> > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> > index e1b142947067..fe3e7e7dede8 100644
> > --- a/drivers/platform/x86/Makefile
> > +++ b/drivers/platform/x86/Makefile
> > @@ -32,6 +32,7 @@ obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o
> > # ASUS
> > obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
> > obj-$(CONFIG_ASUS_WIRELESS) += asus-wireless.o
> > +obj-$(CONFIG_ASUS_ARMOURY) += asus-armoury.o
> > obj-$(CONFIG_ASUS_WMI) += asus-wmi.o
> > obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o
> > obj-$(CONFIG_ASUS_TF103C_DOCK) += asus-tf103c-dock.o
> > diff --git a/drivers/platform/x86/asus-armoury.c b/drivers/platform/x86/asus-armoury.c
> > new file mode 100644
> > index 000000000000..6e4507be0f05
> > --- /dev/null
> > +++ b/drivers/platform/x86/asus-armoury.c
> > @@ -0,0 +1,702 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Asus Armoury (WMI) attributes driver. This driver uses the fw_attributes
> > + * class to expose the various WMI functions that many gaming and some
> > + * non-gaming ASUS laptops have available.
> > + * These typically don't fit anywhere else in the sysfs such as under LED class,
> > + * hwmon or other, and are set in Windows using the ASUS Armoury Crate tool.
> > + *
> > + * Copyright(C) 2010 Intel Corporation.
> > + * Copyright(C) 2024-2024 Luke Jones <luke@...nes.dev>
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/device.h>
> > +#include <linux/dmi.h>
> > +#include <linux/errno.h>
> > +#include <linux/fs.h>
> > +#include <linux/kernel.h>
> > +#include <linux/kmod.h>
> > +#include <linux/kobject.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/platform_data/x86/asus-wmi.h>
> > +#include <linux/types.h>
> > +
> > +#include "asus-armoury.h"
> > +#include "firmware_attributes_class.h"
> > +#include "asus-wmi.h"
> > +
> > +#define ASUS_NB_WMI_EVENT_GUID "0B3CBB35-E3C2-45ED-91C2-4C5A6D195D1C"
> > +
> > +#define ASUS_MINI_LED_MODE_MASK 0x03
> > +/* Standard modes for devices with only on/off */
> > +#define ASUS_MINI_LED_OFF 0x00
> > +#define ASUS_MINI_LED_ON 0x01
> > +/* New mode on some devices, define here to clarify remapping later */
>
> The word "new" ages poorly, especially in comments.
Ack. Was a copy/paste from old asus_wmi code.
> > +#define ASUS_MINI_LED_STRONG_MODE 0x02
> > +/* New modes for devices with 3 mini-led mode types */
> > +#define ASUS_MINI_LED_2024_WEAK 0x00
> > +#define ASUS_MINI_LED_2024_STRONG 0x01
> > +#define ASUS_MINI_LED_2024_OFF 0x02
> > +
> > +/* Default limits for tunables available on ASUS ROG laptops */
> > +#define PPT_CPU_LIMIT_MIN 5
> > +#define PPT_CPU_LIMIT_MAX 150
> > +#define PPT_CPU_LIMIT_DEFAULT 80
> > +#define PPT_PLATFORM_MIN 5
> > +#define PPT_PLATFORM_MAX 100
> > +#define PPT_PLATFORM_DEFAULT 80
> > +#define NVIDIA_BOOST_MIN 5
> > +#define NVIDIA_BOOST_MAX 25
> > +#define NVIDIA_TEMP_MIN 75
> > +#define NVIDIA_TEMP_MAX 87
> > +
> > +/* Tunables provided by ASUS for gaming laptops */
> > +struct rog_tunables {
> > + u32 cpu_default;
> > + u32 cpu_min;
> > + u32 cpu_max;
> > +
> > + u32 platform_default;
> > + u32 platform_min;
> > + u32 platform_max;
> > +
> > + u32 ppt_pl1_spl; // cpu
> > + u32 ppt_pl2_sppt; // cpu
> > + u32 ppt_apu_sppt; // plat
> > + u32 ppt_platform_sppt; // plat
> > + u32 ppt_fppt; // cpu
> > +
> > + u32 nv_boost_default;
> > + u32 nv_boost_min;
> > + u32 nv_boost_max;
> > + u32 nv_dynamic_boost;
> > +
> > + u32 nv_temp_default;
> > + u32 nv_temp_min;
> > + u32 nv_temp_max;
> > + u32 nv_temp_target;
> > +};
> > +
> > +static const struct class *fw_attr_class;
> > +
> > +struct asus_armoury_priv {
> > + struct device *fw_attr_dev;
> > + struct kset *fw_attr_kset;
> > +
> > + struct rog_tunables *rog_tunables;
> > + u32 mini_led_dev_id;
> > + u32 gpu_mux_dev_id;
> > +
> > + struct mutex mutex;
> > +};
> > +
> > +static struct asus_armoury_priv asus_armoury = { .mutex = __MUTEX_INITIALIZER(
> > + asus_armoury.mutex) };
> > +
> > +struct fw_attrs_group {
> > + bool pending_reboot;
> > +};
> > +
> > +static struct fw_attrs_group fw_attrs = {
> > + .pending_reboot = false,
> > +};
> > +
> > +struct asus_attr_group {
> > + const struct attribute_group *attr_group;
> > + u32 wmi_devid;
> > +};
> > +
> > +static bool asus_wmi_is_present(u32 dev_id)
> > +{
> > + u32 retval;
> > + int status;
> > +
> > + status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS, dev_id, 0, &retval);
> > + pr_debug("%s called (0x%08x), retval: 0x%08x\n", __func__, dev_id, retval);
> > +
> > + return status == 0 && (retval & ASUS_WMI_DSTS_PRESENCE_BIT);
> > +}
> > +
> > +static void asus_set_reboot_and_signal_event(void)
> > +{
> > + fw_attrs.pending_reboot = true;
> > + kobject_uevent(&asus_armoury.fw_attr_dev->kobj, KOBJ_CHANGE);
> > +}
> > +
> > +static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
> > +{
> > + return sysfs_emit(buf, "%d\n", fw_attrs.pending_reboot);
> > +}
> > +
> > +static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot);
> > +
> > +static bool asus_bios_requires_reboot(struct kobj_attribute *attr)
> > +{
> > + return !strcmp(attr->attr.name, "gpu_mux_mode") ||
> > + !strcmp(attr->attr.name, "panel_hd_mode");
> > +}
> > +
> > +/**
> > + * attr_int_store() - Generic store function for use with most WMI functions.
> > + * @kobj: Pointer to the driver object.
> > + * @kobj_attribute: Pointer to the attribute calling this function.
> > + * @buf: The buffer to read from, this is parsed to `int` type.
> > + * @count:
> > + * @min: Minimum accepted value. Below this returns -EINVAL.
> > + * @max: Maximum accepted value. Above this returns -EINVAL.
> > + * @store_value: Pointer to where the parsed value should be stored.
> > + * @wmi_dev: The WMI function ID to use.
> > + *
> > + * The WMI functions available on most ASUS laptops return a 1 as "success", and
> > + * a 0 as failed. However some functions can return n > 1 for additional errors.
> > + * attr_int_store() currently treats all values which are not 1 as errors, ignoring
> > + * the possible differences in WMI error returns.
> > + *
> > + * Returns: Either count, or an error.
> > + */
> > +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf,
> > + size_t count, u32 min, u32 max, u32 *store_value, u32 wmi_dev)
> > +{
> > + u32 result, value;
> > + int err;
> > +
> > + err = kstrtouint(buf, 10, &value);
> > + if (err)
> > + return err;
> > +
> > + if (value < min || value > max)
> > + return -EINVAL;
> > +
> > + err = asus_wmi_set_devstate(wmi_dev, value, &result);
> > + if (err) {
> > + pr_err("Failed to set %s: %d\n", attr->attr.name, err);
> > + return err;
> > + }
> > +
> > + if (result != 1) {
> > + pr_err("Failed to set %s (result): 0x%x\n", attr->attr.name, result);
> > + return -EIO;
> > + }
> > +
> > + if (store_value != NULL)
> > + *store_value = value;
> > + sysfs_notify(kobj, NULL, attr->attr.name);
> > +
> > + if (asus_bios_requires_reboot(attr))
> > + asus_set_reboot_and_signal_event();
> > +
> > + return count;
> > +}
> > +
> > +/* Mini-LED mode **************************************************************/
> > +static ssize_t mini_led_mode_current_value_show(struct kobject *kobj,
> > + struct kobj_attribute *attr, char *buf)
> > +{
> > + u32 value;
> > + int err;
> > +
> > + err = asus_wmi_get_devstate_dsts(asus_armoury.mini_led_dev_id, &value);
> > + if (err)
> > + return err;
> > +
> > + value &= ASUS_MINI_LED_MODE_MASK;
> > +
> > + /*
> > + * Remap the mode values to match previous generation mini-LED. The last gen
> > + * WMI 0 == off, while on this version WMI 2 == off (flipped).
> > + */
> > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) {
> > + switch (value) {
> > + case ASUS_MINI_LED_2024_WEAK:
> > + value = ASUS_MINI_LED_ON;
> > + break;
> > + case ASUS_MINI_LED_2024_STRONG:
> > + value = ASUS_MINI_LED_STRONG_MODE;
> > + break;
> > + case ASUS_MINI_LED_2024_OFF:
> > + value = ASUS_MINI_LED_OFF;
> > + break;
> > + }
> > + }
> > +
> > + return sysfs_emit(buf, "%u\n", value);
> > +}
> > +
> > +static ssize_t mini_led_mode_current_value_store(struct kobject *kobj,
> > + struct kobj_attribute *attr, const char *buf,
> > + size_t count)
> > +{
> > + int result, err;
> > + u32 mode;
> > +
> > + err = kstrtou32(buf, 10, &mode);
> > + if (err)
> > + return err;
> > +
> > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE &&
> > + mode > ASUS_MINI_LED_ON)
> > + return -EINVAL;
> > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2 &&
> > + mode > ASUS_MINI_LED_STRONG_MODE)
> > + return -EINVAL;
> > +
> > + /*
> > + * Remap the mode values so expected behaviour is the same as the last
> > + * generation of mini-LED with 0 == off, 1 == on.
> > + */
> > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) {
> > + switch (mode) {
> > + case ASUS_MINI_LED_OFF:
> > + mode = ASUS_MINI_LED_2024_OFF;
> > + break;
> > + case ASUS_MINI_LED_ON:
> > + mode = ASUS_MINI_LED_2024_WEAK;
> > + break;
> > + case ASUS_MINI_LED_STRONG_MODE:
> > + mode = ASUS_MINI_LED_2024_STRONG;
> > + break;
> > + }
> > + }
> > +
> > + err = asus_wmi_set_devstate(asus_armoury.mini_led_dev_id, mode, &result);
> > + if (err) {
> > + pr_warn("Failed to set mini-LED: %d\n", err);
> > + return err;
> > + }
> > +
> > + if (result != 1) {
> > + pr_warn("Failed to set mini-LED mode (result): 0x%x\n", result);
> > + return -EIO;
> > + }
> > +
> > + sysfs_notify(kobj, NULL, attr->attr.name);
> > +
> > + return count;
> > +}
> > +
> > +static ssize_t mini_led_mode_possible_values_show(struct kobject *kobj,
> > + struct kobj_attribute *attr, char *buf)
> > +{
> > + switch (asus_armoury.mini_led_dev_id) {
> > + case ASUS_WMI_DEVID_MINI_LED_MODE:
> > + return sysfs_emit(buf, "0;1\n");
> > + case ASUS_WMI_DEVID_MINI_LED_MODE2:
> > + return sysfs_emit(buf, "0;1;2\n");
> > + }
> > +
> > + return sysfs_emit(buf, "0\n");
> > +}
> > +
> > +ATTR_GROUP_ENUM_CUSTOM(mini_led_mode, "mini_led_mode", "Set the mini-LED backlight mode");
> > +
> > +static ssize_t gpu_mux_mode_current_value_store(struct kobject *kobj,
> > + struct kobj_attribute *attr, const char *buf,
> > + size_t count)
> > +{
> > + int result, err;
> > + u32 optimus;
> > +
> > + err = kstrtou32(buf, 10, &optimus);
> > + if (err)
> > + return err;
> > +
> > + if (optimus > 1)
> > + return -EINVAL;
> > +
> > + if (asus_wmi_is_present(ASUS_WMI_DEVID_DGPU)) {
> > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_DGPU, &result);
> > + if (err)
> > + return err;
> > + if (result && !optimus) {
> > + err = -ENODEV;
> > + pr_warn("Can not switch MUX to dGPU mode when dGPU is disabled: %02X %02X %d\n",
> > + result, optimus, err);
> > + return err;
> > + }
> > + }
> > +
> > + if (asus_wmi_is_present(ASUS_WMI_DEVID_EGPU)) {
> > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU, &result);
> > + if (err)
> > + return err;
> > + if (result && !optimus) {
> > + err = -ENODEV;
> > + pr_warn("Can not switch MUX to dGPU mode when eGPU is enabled: %d\n",
> > + err);
> > + return err;
> > + }
> > + }
> > +
> > + err = asus_wmi_set_devstate(asus_armoury.gpu_mux_dev_id, optimus, &result);
> > + if (err) {
> > + pr_err("Failed to set GPU MUX mode: %d\n", err);
> > + return err;
> > + }
> > + /* !1 is considered a fail by ASUS */
> > + if (result != 1) {
> > + pr_warn("Failed to set GPU MUX mode (result): 0x%x\n", result);
> > + return -EIO;
> > + }
> > +
> > + sysfs_notify(kobj, NULL, attr->attr.name);
> > + asus_set_reboot_and_signal_event();
> > +
> > + return count;
> > +}
> > +WMI_SHOW_INT(gpu_mux_mode_current_value, "%d\n", asus_armoury.gpu_mux_dev_id);
> > +ATTR_GROUP_BOOL_CUSTOM(gpu_mux_mode, "gpu_mux_mode", "Set the GPU display MUX mode");
> > +
> > +/*
> > + * A user may be required to store the value twice, typical store first, then
> > + * rescan PCI bus to activate power, then store a second time to save correctly.
> > + * The reason for this is that an extra code path in the ACPI is enabled when
> > + * the device and bus are powered.
> > + */
> > +static ssize_t dgpu_disable_current_value_store(struct kobject *kobj,
> > + struct kobj_attribute *attr, const char *buf,
> > + size_t count)
> > +{
> > + int result, err;
> > + u32 disable;
> > +
> > + err = kstrtou32(buf, 10, &disable);
> > + if (err)
> > + return err;
> > +
> > + if (disable > 1)
> > + return -EINVAL;
> > +
> > + if (asus_armoury.gpu_mux_dev_id) {
> > + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result);
> > + if (err)
> > + return err;
> > + if (!result && disable) {
> > + err = -ENODEV;
> > + pr_warn("Can not disable dGPU when the MUX is in dGPU mode: %d\n", err);
> > + return err;
> > + }
> > + }
> > +
> > + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_DGPU, disable, &result);
> > + if (err) {
> > + pr_warn("Failed to set dGPU disable: %d\n", err);
> > + return err;
> > + }
> > +
> > + if (result != 1) {
> > + pr_warn("Failed to set dGPU disable (result): 0x%x\n", result);
> > + return -EIO;
> > + }
> > +
> > + sysfs_notify(kobj, NULL, attr->attr.name);
> > +
> > + return count;
> > +}
> > +WMI_SHOW_INT(dgpu_disable_current_value, "%d\n", ASUS_WMI_DEVID_DGPU);
> > +ATTR_GROUP_BOOL_CUSTOM(dgpu_disable, "dgpu_disable", "Disable the dGPU");
> > +
> > +/* The ACPI call to enable the eGPU also disables the internal dGPU */
> > +static ssize_t egpu_enable_current_value_store(struct kobject *kobj, struct kobj_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + int result, err;
> > + u32 enable;
> > +
> > + err = kstrtou32(buf, 10, &enable);
> > + if (err)
> > + return err;
> > +
> > + if (enable > 1)
> > + return -EINVAL;
> > +
> > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU_CONNECTED, &result);
> > + if (err) {
> > + pr_warn("Failed to get eGPU connection status: %d\n", err);
> > + return err;
> > + }
> > +
> > + if (asus_armoury.gpu_mux_dev_id) {
> > + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result);
> > + if (err) {
> > + pr_warn("Failed to get GPU MUX status: %d\n", result);
> > + return result;
> > + }
> > + if (!result && enable) {
> > + err = -ENODEV;
> > + pr_warn("Can not enable eGPU when the MUX is in dGPU mode: %d\n", err);
> > + return err;
> > + }
> > + }
> > +
> > + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_EGPU, enable, &result);
> > + if (err) {
> > + pr_warn("Failed to set eGPU state: %d\n", err);
> > + return err;
> > + }
> > +
> > + if (result != 1) {
> > + pr_warn("Failed to set eGPU state (retval): 0x%x\n", result);
> > + return -EIO;
> > + }
> > +
> > + sysfs_notify(kobj, NULL, attr->attr.name);
> > +
> > + return count;
> > +}
> > +WMI_SHOW_INT(egpu_enable_current_value, "%d\n", ASUS_WMI_DEVID_EGPU);
> > +ATTR_GROUP_BOOL_CUSTOM(egpu_enable, "egpu_enable", "Enable the eGPU (also disables dGPU)");
> > +
> > +/* Simple attribute creation */
> > +ATTR_GROUP_ROG_TUNABLE(ppt_pl1_spl, "ppt_pl1_spl", ASUS_WMI_DEVID_PPT_PL1_SPL, cpu_default,
> > + cpu_min, cpu_max, 1, "Set the CPU slow package limit");
> > +ATTR_GROUP_ROG_TUNABLE(ppt_pl2_sppt, "ppt_pl2_sppt", ASUS_WMI_DEVID_PPT_PL2_SPPT, cpu_default,
> > + cpu_min, cpu_max, 1, "Set the CPU fast package limit");
> > +ATTR_GROUP_ROG_TUNABLE(ppt_apu_sppt, "ppt_apu_sppt", ASUS_WMI_DEVID_PPT_APU_SPPT,
> > + platform_default, platform_min, platform_max, 1,
> > + "Set the CPU slow package limit");
> > +ATTR_GROUP_ROG_TUNABLE(ppt_platform_sppt, "ppt_platform_sppt", ASUS_WMI_DEVID_PPT_PLAT_SPPT,
> > + platform_default, platform_min, platform_max, 1,
> > + "Set the CPU slow package limit");
> > +ATTR_GROUP_ROG_TUNABLE(ppt_fppt, "ppt_fppt", ASUS_WMI_DEVID_PPT_FPPT, cpu_default, cpu_min,
> > + cpu_max, 1, "Set the CPU slow package limit");
>
> I go back and forth on the existence of tuning knobs for all these
> values. As a tinkerer it's of course nice to see so many knobs.
>
> However thinking about how this would be exposed to userspace and what
> users will drag for a "slider" for performance it's really confusing.
> Which knob is tuned? What's different for CPU vs platform? What's slow
> vs fast?
I fully understand the concern here and share it. But one thing I think that should be considered is that *most* users won't be going directly to the attributes, or even be aware of them. Those that do I would hope at least know what they are or the name/desc is enough to provide hints to find more info.
And then a usersapce app exposing these should explain what they are, and be much more usable. A tangible benefit of fw_attr class is that it makes userspace apps easier to do.
> As a result, I think I would rather see these (specifically) relegated
> to debugfs attributes and instead export an ACPI platform profile. The
> ACPI platform profile can then give users a clearer set of expectations; IE:
>
> "power-saver", "balanced", "performance"
>
> Bifurcating it this way will enable both audiences. The people who want
> to drag a slider in a UI to save power or consume power can do so, and
> those that know what all these mean and want to spend more time
> tinkering can go to debugfs to do so.
>
> But with this idea there would essentially be two sets of knobs that
> change the same thing. So I think that if the debugfs knobs were tuned
> away from the defaults the platform profile needs to be reset to an error.
This would at least address that changing these values deviates from the platform_profile, and also the system fan profile - so it puts the onus on the user to ensure the settings they use are safe to use.
My main concern is perhaps that I lose the easy to use fw_attr class. But I suppose I can also recreate the minimum of /path/attr_name/{min/max/default/current} without too much hassle.
Moving to debugfs:
pros:
- setting unsafe values moves responsibility to user
- simplifies things a little
- hides a possible danger from users
cons:
- setting unsafe values moves responsibility to user
- a userspace app then also takes on that responsibility
- loses the fw_attr class API
- makes it harder to access
For now these are moved to a new patch to make it easier to review as well as change.
> > +ATTR_GROUP_ROG_TUNABLE(nv_dynamic_boost, "nv_dynamic_boost", ASUS_WMI_DEVID_NV_DYN_BOOST,
> > + nv_boost_default, nv_boost_min, nv_boost_max, 1,
> > + "Set the Nvidia dynamic boost limit");
> > +ATTR_GROUP_ROG_TUNABLE(nv_temp_target, "nv_temp_target", ASUS_WMI_DEVID_NV_THERM_TARGET,
> > + nv_temp_default, nv_boost_min, nv_temp_max, 1,
> > + "Set the Nvidia max thermal limit");
> > +
> > +ATTR_GROUP_ENUM_INT_RO(charge_mode, "charge_mode", ASUS_WMI_DEVID_CHARGE_MODE, "0;1;2",
> > + "Show the current mode of charging");
> > +
> > +ATTR_GROUP_BOOL_RW(boot_sound, "boot_sound", ASUS_WMI_DEVID_BOOT_SOUND,
> > + "Set the boot POST sound");
> > +ATTR_GROUP_BOOL_RW(mcu_powersave, "mcu_powersave", ASUS_WMI_DEVID_MCU_POWERSAVE,
> > + "Set MCU powersaving mode");
> > +ATTR_GROUP_BOOL_RW(panel_od, "panel_overdrive", ASUS_WMI_DEVID_PANEL_OD,
> > + "Set the panel refresh overdrive");
> > +ATTR_GROUP_BOOL_RW(panel_hd_mode, "panel_hd_mode", ASUS_WMI_DEVID_PANEL_HD,
> > + "Set the panel HD mode to UHD<0> or FHD<1>");
> > +ATTR_GROUP_BOOL_RO(egpu_connected, "egpu_connected", ASUS_WMI_DEVID_EGPU_CONNECTED,
> > + "Show the eGPU connection status");
> > +
> > +/* If an attribute does not require any special case handling add it here */
> > +static const struct asus_attr_group armoury_attr_groups[] = {
> > + { &egpu_connected_attr_group, ASUS_WMI_DEVID_EGPU_CONNECTED },
> > + { &egpu_enable_attr_group, ASUS_WMI_DEVID_EGPU },
> > + { &dgpu_disable_attr_group, ASUS_WMI_DEVID_DGPU },
> > +
> > + { &ppt_pl1_spl_attr_group, ASUS_WMI_DEVID_PPT_PL1_SPL },
> > + { &ppt_pl2_sppt_attr_group, ASUS_WMI_DEVID_PPT_PL2_SPPT },
> > + { &ppt_apu_sppt_attr_group, ASUS_WMI_DEVID_PPT_APU_SPPT },
> > + { &ppt_platform_sppt_attr_group, ASUS_WMI_DEVID_PPT_PLAT_SPPT },
> > + { &ppt_fppt_attr_group, ASUS_WMI_DEVID_PPT_FPPT },
> > + { &nv_dynamic_boost_attr_group, ASUS_WMI_DEVID_NV_DYN_BOOST },
> > + { &nv_temp_target_attr_group, ASUS_WMI_DEVID_NV_THERM_TARGET },
> > +
> > + { &charge_mode_attr_group, ASUS_WMI_DEVID_CHARGE_MODE },
> > + { &boot_sound_attr_group, ASUS_WMI_DEVID_BOOT_SOUND },
> > + { &mcu_powersave_attr_group, ASUS_WMI_DEVID_MCU_POWERSAVE },
> > + { &panel_od_attr_group, ASUS_WMI_DEVID_PANEL_OD },
> > + { &panel_hd_mode_attr_group, ASUS_WMI_DEVID_PANEL_HD },
> > +};
> > +
> > +static int asus_fw_attr_add(void)
> > +{
> > + int err;
> > +
> > + err = fw_attributes_class_get(&fw_attr_class);
> > + if (err)
> > + goto fail_class_created;
> > +
> > + asus_armoury.fw_attr_dev =
> > + device_create(fw_attr_class, NULL, MKDEV(0, 0), NULL, "%s", DRIVER_NAME);
> > +
> > + if (IS_ERR(asus_armoury.fw_attr_dev)) {
> > + err = PTR_ERR(asus_armoury.fw_attr_dev);
> > + goto fail_class_created;
> > + }
> > +
> > + asus_armoury.fw_attr_kset =
> > + kset_create_and_add("attributes", NULL, &asus_armoury.fw_attr_dev->kobj);
> > + if (!asus_armoury.fw_attr_dev) {
> > + err = -ENOMEM;
> > + pr_debug("Failed to create and add attributes\n");
> > + goto err_destroy_classdev;
> > + }
> > +
> > + err = sysfs_create_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr);
> > + if (err) {
> > + pr_warn("Failed to create sysfs level attributes\n");
> > + goto fail_class_created;
> > + }
> > +
> > + err = 0;
> > + asus_armoury.mini_led_dev_id = 0;
> > + if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE)) {
> > + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE;
> > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> > + &mini_led_mode_attr_group);
> > + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE2)) {
> > + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2;
> > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> > + &mini_led_mode_attr_group);
> > + }
> > + if (err)
> > + pr_warn("Failed to create sysfs-group for mini_led\n");
> > +
> > + err = 0;
> > + asus_armoury.gpu_mux_dev_id = 0;
> > + if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX)) {
> > + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX;
> > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> > + &gpu_mux_mode_attr_group);
> > + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX_VIVO)) {
> > + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX_VIVO;
> > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> > + &gpu_mux_mode_attr_group);
> > + }
> > + if (err)
> > + pr_warn("Failed to create sysfs-group for gpu_mux\n");
> > +
> > + for (int i = 0; i < ARRAY_SIZE(armoury_attr_groups); i++) {
> > + /* Do not show for the Ally devices as powersave is entirely unreliable on it */
> > + if (armoury_attr_groups[i].wmi_devid == ASUS_WMI_DEVID_MCU_POWERSAVE &&
> > + dmi_check_system(asus_rog_ally_device))
> > + continue;
> > +
> > + if (!asus_wmi_is_present(armoury_attr_groups[i].wmi_devid))
> > + continue;
> > +
> > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> > + armoury_attr_groups[i].attr_group);
> > + if (err)
> > + pr_warn("Failed to create sysfs-group for %s\n",
> > + armoury_attr_groups[i].attr_group->name);
> > + else
> > + pr_debug("Created sysfs-group for %s\n",
> > + armoury_attr_groups[i].attr_group->name);
> > + }
> > +
> > + return 0;
> > +
> > +err_destroy_classdev:
> > + device_destroy(fw_attr_class, MKDEV(0, 0));
> > +
> > +fail_class_created:
> > + fw_attributes_class_put();
> > + return err;
> > +}
> > +
> > +/* Init / exit ****************************************************************/
> > +
> > +/* Set up the min/max and defaults for ROG tunables */
> > +static void init_rog_tunables(struct rog_tunables *rog)
> > +{
> > + const char *product;
> > + u32 max_boost = NVIDIA_BOOST_MAX;
> > + u32 cpu_default = PPT_CPU_LIMIT_DEFAULT;
> > + u32 cpu_max = PPT_CPU_LIMIT_MAX;
> > + u32 platform_default = PPT_PLATFORM_DEFAULT;
> > + u32 platform_max = PPT_PLATFORM_MAX;
> > +
> > + /*
> > + * ASUS product_name contains everything required, e.g,
> > + * "ROG Flow X16 GV601VV_GV601VV_00185149B"
> > + */
> > + product = dmi_get_system_info(DMI_PRODUCT_NAME);
> > +
> > + if (strstr(product, "GA402R")) {
> > + cpu_default = 125;
> > + } else if (strstr(product, "13QY")) {
> > + cpu_max = 250;
> > + } else if (strstr(product, "X13")) {
> > + cpu_max = 75;
> > + cpu_default = 50;
> > + } else if (strstr(product, "RC71") || strstr(product, "RC72")) {
> > + cpu_max = 50;
> > + cpu_default = 30;
> > + } else if (strstr(product, "G814") || strstr(product, "G614") ||
> > + strstr(product, "G834") || strstr(product, "G634")) {
> > + cpu_max = 175;
> > + } else if (strstr(product, "GA402X") || strstr(product, "GA403") ||
> > + strstr(product, "FA507N") || strstr(product, "FA507X") ||
> > + strstr(product, "FA707N") || strstr(product, "FA707X")) {
> > + cpu_max = 90;
> > + }
> > +
> > + if (strstr(product, "GZ301ZE"))
> > + max_boost = 5;
> > + else if (strstr(product, "FX507ZC4"))
> > + max_boost = 15;
> > + else if (strstr(product, "GU605"))
> > + max_boost = 20;
> > +
> > + /* ensure defaults for tunables */
> > + rog->cpu_default = cpu_default;
> > + rog->cpu_min = PPT_CPU_LIMIT_MIN;
> > + rog->cpu_max = cpu_max;
> > +
> > + rog->platform_default = platform_default;
> > + rog->platform_max = PPT_PLATFORM_MIN;
> > + rog->platform_max = platform_max;
> > +
> > + rog->ppt_pl1_spl = cpu_default;
> > + rog->ppt_pl2_sppt = cpu_default;
> > + rog->ppt_apu_sppt = cpu_default;
> > +
> > + rog->ppt_platform_sppt = platform_default;
> > + rog->ppt_fppt = cpu_default;
> > +
> > + rog->nv_boost_default = NVIDIA_BOOST_MAX;
> > + rog->nv_boost_max = NVIDIA_BOOST_MIN;
> > + rog->nv_boost_max = max_boost;
> > + rog->nv_dynamic_boost = NVIDIA_BOOST_MIN;
> > +
> > + rog->nv_temp_default = NVIDIA_TEMP_MAX;
> > + rog->nv_temp_max = NVIDIA_TEMP_MIN;
> > + rog->nv_temp_max = NVIDIA_TEMP_MAX;
> > + rog->nv_temp_target = NVIDIA_TEMP_MIN;
> > +}
> > +
> > +static int __init asus_fw_init(void)
> > +{
> > + int err;
> > +
> > + fw_attrs.pending_reboot = false;
> > +
> > + asus_armoury.rog_tunables = kzalloc(sizeof(struct rog_tunables), GFP_KERNEL);
> > + if (!asus_armoury.rog_tunables)
> > + return -ENOMEM;
> > +
> > + init_rog_tunables(asus_armoury.rog_tunables);
> > +
> > + err = asus_fw_attr_add();
> > + if (err)
> > + return err;
> > +
> > + return 0;
> > +}
> > +
> > +static void __exit asus_fw_exit(void)
> > +{
> > + mutex_lock(&asus_armoury.mutex);
> > +
> > + sysfs_remove_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr);
> > + kset_unregister(asus_armoury.fw_attr_kset);
> > + device_destroy(fw_attr_class, MKDEV(0, 0));
> > + fw_attributes_class_put();
> > +
> > + mutex_unlock(&asus_armoury.mutex);
> > +}
> > +
> > +module_init(asus_fw_init);
> > +module_exit(asus_fw_exit);
> > +
> > +MODULE_IMPORT_NS(ASUS_WMI);
> > +MODULE_AUTHOR("Luke Jones <luke@...nes.dev>");
> > +MODULE_DESCRIPTION("ASUS BIOS Configuration Driver");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("wmi:" ASUS_NB_WMI_EVENT_GUID);
> > diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h
> > new file mode 100644
> > index 000000000000..8bb75cf88305
> > --- /dev/null
> > +++ b/drivers/platform/x86/asus-armoury.h
> > @@ -0,0 +1,209 @@
> > +/* SPDX-License-Identifier: GPL-2.0
> > + *
> > + * Definitions for kernel modules using asus-armoury driver
> > + *
> > + * Copyright (c) 2024 Luke Jones <luke@...nes.dev>
> > + */
> > +
> > +#ifndef _ASUS_BIOSCFG_H_
> > +#define _ASUS_BIOSCFG_H_
> > +
> > +#include <linux/types.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define DRIVER_NAME "asus-armoury"
> > +
> > +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr,
> > + const char *buf, size_t count, u32 min, u32 max,
> > + u32 *store_value, u32 wmi_dev);
> > +
> > +static ssize_t int_type_show(struct kobject *kobj, struct kobj_attribute *attr,
> > + char *buf)
> > +{
> > + return sysfs_emit(buf, "integer\n");
> > +}
> > +
> > +static ssize_t enum_type_show(struct kobject *kobj, struct kobj_attribute *attr,
> > + char *buf)
> > +{
> > + return sysfs_emit(buf, "enumeration\n");
> > +}
> > +
> > +#define __ASUS_ATTR_RO(_func, _name) \
> > + { \
> > + .attr = { .name = __stringify(_name), .mode = 0444 }, \
> > + .show = _func##_##_name##_show, \
> > + }
> > +
> > +#define __ASUS_ATTR_RO_AS(_name, _show) \
> > + { \
> > + .attr = { .name = __stringify(_name), .mode = 0444 }, \
> > + .show = _show, \
> > + }
> > +
> > +#define __ASUS_ATTR_RW(_func, _name) \
> > + __ATTR(_name, 0644, _func##_##_name##_show, _func##_##_name##_store)
> > +
> > +#define __WMI_STORE_INT(_attr, _min, _max, _wmi) \
> > + static ssize_t _attr##_store(struct kobject *kobj, \
> > + struct kobj_attribute *attr, \
> > + const char *buf, size_t count) \
> > + { \
> > + return attr_int_store(kobj, attr, buf, count, _min, _max, \
> > + NULL, _wmi); \
> > + }
> > +
> > +#define WMI_SHOW_INT(_attr, _fmt, _wmi) \
> > + static ssize_t _attr##_show(struct kobject *kobj, \
> > + struct kobj_attribute *attr, char *buf) \
> > + { \
> > + u32 result; \
> > + int err; \
> > + err = asus_wmi_get_devstate_dsts(_wmi, &result); \
> > + if (err) \
> > + return err; \
> > + return sysfs_emit(buf, _fmt, \
> > + result & ~ASUS_WMI_DSTS_PRESENCE_BIT); \
> > + }
> > +
> > +/* Create functions and attributes for use in other macros or on their own */
> > +
> > +#define __ATTR_CURRENT_INT_RO(_attr, _wmi) \
> > + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \
> > + static struct kobj_attribute attr_##_attr##_current_value = \
> > + __ASUS_ATTR_RO(_attr, current_value)
> > +
> > +#define __ATTR_CURRENT_INT_RW(_attr, _minv, _maxv, _wmi) \
> > + __WMI_STORE_INT(_attr##_current_value, _minv, _maxv, _wmi); \
> > + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \
> > + static struct kobj_attribute attr_##_attr##_current_value = \
> > + __ASUS_ATTR_RW(_attr, current_value)
> > +
> > +/* Shows a formatted static variable */
> > +#define __ATTR_SHOW_FMT(_prop, _attrname, _fmt, _val) \
> > + static ssize_t _attrname##_##_prop##_show( \
> > + struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
> > + { \
> > + return sysfs_emit(buf, _fmt, _val); \
> > + } \
> > + static struct kobj_attribute attr_##_attrname##_##_prop = \
> > + __ASUS_ATTR_RO(_attrname, _prop)
> > +
> > +/* Boolean style enumeration, base macro. Requires adding show/store */
> > +#define __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname) \
> > + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \
> > + __ATTR_SHOW_FMT(possible_values, _attrname, "%s\n", _possible); \
> > + static struct kobj_attribute attr_##_attrname##_type = \
> > + __ASUS_ATTR_RO_AS(type, enum_type_show); \
> > + static struct attribute *_attrname##_attrs[] = { \
> > + &attr_##_attrname##_current_value.attr, \
> > + &attr_##_attrname##_display_name.attr, \
> > + &attr_##_attrname##_possible_values.attr, \
> > + &attr_##_attrname##_type.attr, NULL \
> > + }; \
> > + static const struct attribute_group _attrname##_attr_group = { \
> > + .name = _fsname, .attrs = _attrname##_attrs \
> > + }
> > +
> > +#define ATTR_GROUP_BOOL_RO(_attrname, _fsname, _wmi, _dispname) \
> > + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \
> > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname)
> > +
> > +#define ATTR_GROUP_BOOL_RW(_attrname, _fsname, _wmi, _dispname) \
> > + __ATTR_CURRENT_INT_RW(_attrname, 0, 1, _wmi); \
> > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname)
> > +
> > +/*
> > + * Requires <name>_current_value_show(), <name>_current_value_show()
> > + */
> > +#define ATTR_GROUP_BOOL_CUSTOM(_attrname, _fsname, _dispname) \
> > + static struct kobj_attribute attr_##_attrname##_current_value = \
> > + __ASUS_ATTR_RW(_attrname, current_value); \
> > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname)
> > +
> > +#define ATTR_GROUP_ENUM_INT_RO(_attrname, _fsname, _wmi, _possible, _dispname) \
> > + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \
> > + __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname)
> > +
> > +/*
> > + * Requires <name>_current_value_show(), <name>_current_value_show()
> > + * and <name>_possible_values_show()
> > + */
> > +#define ATTR_GROUP_ENUM_CUSTOM(_attrname, _fsname, _dispname) \
> > + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \
> > + static struct kobj_attribute attr_##_attrname##_current_value = \
> > + __ASUS_ATTR_RW(_attrname, current_value); \
> > + static struct kobj_attribute attr_##_attrname##_possible_values = \
> > + __ASUS_ATTR_RO(_attrname, possible_values); \
> > + static struct kobj_attribute attr_##_attrname##_type = \
> > + __ASUS_ATTR_RO_AS(type, enum_type_show); \
> > + static struct attribute *_attrname##_attrs[] = { \
> > + &attr_##_attrname##_current_value.attr, \
> > + &attr_##_attrname##_display_name.attr, \
> > + &attr_##_attrname##_possible_values.attr, \
> > + &attr_##_attrname##_type.attr, NULL \
> > + }; \
> > + static const struct attribute_group _attrname##_attr_group = { \
> > + .name = _fsname, .attrs = _attrname##_attrs \
> > + }
> > +
> > +/*
> > + * ROG PPT attributes need a little different in setup as they
> > + * require rog_tunables members.
> > + */
> > +
> > +#define __ROG_TUNABLE_RW(_attr, _min, _max, _wmi) \
> > + static ssize_t _attr##_current_value_store( \
> > + struct kobject *kobj, struct kobj_attribute *attr, \
> > + const char *buf, size_t count) \
> > + { \
> > + return attr_int_store(kobj, attr, buf, count, \
> > + asus_armoury.rog_tunables->_min, \
> > + asus_armoury.rog_tunables->_max, \
> > + &asus_armoury.rog_tunables->_attr, \
> > + _wmi); \
> > + } \
> > + static ssize_t _attr##_current_value_show( \
> > + struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
> > + { \
> > + return sysfs_emit(buf, "%u\n", \
> > + asus_armoury.rog_tunables->_attr); \
> > + } \
> > + static struct kobj_attribute attr_##_attr##_current_value = \
> > + __ASUS_ATTR_RW(_attr, current_value)
> > +
> > +#define __ROG_TUNABLE_SHOW(_prop, _attrname, _val) \
> > + static ssize_t _attrname##_##_prop##_show( \
> > + struct kobject *kobj, struct kobj_attribute *attr, char *buf) \
> > + { \
> > + return sysfs_emit(buf, "%d\n", \
> > + asus_armoury.rog_tunables->_val); \
> > + } \
> > + static struct kobj_attribute attr_##_attrname##_##_prop = \
> > + __ASUS_ATTR_RO(_attrname, _prop)
> > +
> > +#define ATTR_GROUP_ROG_TUNABLE(_attrname, _fsname, _wmi, _default, _min, _max, \
> > + _incstep, _dispname) \
> > + __ROG_TUNABLE_SHOW(default_value, _attrname, _default); \
> > + __ROG_TUNABLE_RW(_attrname, _min, _max, _wmi); \
> > + __ROG_TUNABLE_SHOW(min_value, _attrname, _min); \
> > + __ROG_TUNABLE_SHOW(max_value, _attrname, _max); \
> > + __ATTR_SHOW_FMT(scalar_increment, _attrname, "%d\n", _incstep); \
> > + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \
> > + static struct kobj_attribute attr_##_attrname##_type = \
> > + __ASUS_ATTR_RO_AS(type, int_type_show); \
> > + static struct attribute *_attrname##_attrs[] = { \
> > + &attr_##_attrname##_current_value.attr, \
> > + &attr_##_attrname##_default_value.attr, \
> > + &attr_##_attrname##_min_value.attr, \
> > + &attr_##_attrname##_max_value.attr, \
> > + &attr_##_attrname##_scalar_increment.attr, \
> > + &attr_##_attrname##_display_name.attr, \
> > + &attr_##_attrname##_type.attr, \
> > + NULL \
> > + }; \
> > + static const struct attribute_group _attrname##_attr_group = { \
> > + .name = _fsname, .attrs = _attrname##_attrs \
> > + }
> > +
> > +#endif /* _ASUS_BIOSCFG_H_ */
> > diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> > index 08861792bddd..d265ef0d7aba 100644
> > --- a/drivers/platform/x86/asus-wmi.c
> > +++ b/drivers/platform/x86/asus-wmi.c
> > @@ -152,20 +152,6 @@ static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL };
> >
> > static int throttle_thermal_policy_write(struct asus_wmi *);
> >
> > -static const struct dmi_system_id asus_ally_mcu_quirk[] = {
> > - {
> > - .matches = {
> > - DMI_MATCH(DMI_BOARD_NAME, "RC71L"),
> > - },
> > - },
> > - {
> > - .matches = {
> > - DMI_MATCH(DMI_BOARD_NAME, "RC72L"),
> > - },
> > - },
> > - { },
> > -};
> > -
> > static bool ashs_present(void)
> > {
> > int i = 0;
> > @@ -386,7 +372,7 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
> > {
> > return asus_wmi_evaluate_method3(method_id, arg0, arg1, 0, retval);
> > }
> > -EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
> > +EXPORT_SYMBOL_NS_GPL(asus_wmi_evaluate_method, ASUS_WMI);
> >
> > static int asus_wmi_evaluate_method5(u32 method_id,
> > u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
> > @@ -550,12 +536,58 @@ static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval)
> > return 0;
> > }
> >
> > -static int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param,
> > - u32 *retval)
> > +/**
> > + * asus_wmi_get_devstate_dsts() - Get the WMI function state.
> > + * @dev_id: The WMI function to call.
> > + * @retval: A pointer to where to store the value returned from WMI.
> > + *
> > + * The returned WMI function state can also be used to determine if the WMI
> > + * function is supported by checking if the asus_wmi_get_devstate_dsts()
> > + * returns an error.
> > + *
> > + * On success the return value is 0, and the retval is a valid value returned
> > + * by the successful WMI function call. An error value is returned only if the
> > + * WMI function failed, or if it returns "unsupported" which is typically a 0
> > + * (no return, and no 'supported' bit set), or a 0xFFFFFFFE (~1) which if not
> > + * caught here can result in unexpected behaviour later.
> > + */
> > +int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval)
> > +{
> > + int err;
> > +
> > + err = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS, dev_id, 0, retval);
> > + *retval &= ~ASUS_WMI_DSTS_PRESENCE_BIT;
>
> Shouldn't you only update this if no error? IE move to the end of the
> function before return 0.
Yes, fixed.
> > +
> > + if (err)
> > + return err;
> > + /* Be explicit about retval */
> > + if (*retval == ASUS_WMI_UNSUPPORTED_METHOD)
> > + return -ENODEV;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_NS_GPL(asus_wmi_get_devstate_dsts, ASUS_WMI);
> > +
> > +/**
> > + * asus_wmi_set_devstate() - Set the WMI function state.
> > + * @dev_id: The WMI function to call.
> > + * @ctrl_param: The argument to be used for this WMI function.
> > + * @retval: A pointer to where to store the value returned from WMI.
> > + *
> > + * The returned WMI function state if not checked here for error as
> > + * asus_wmi_set_devstate() is not called unless first paired with a call to
> > + * asus_wmi_get_devstate_dsts() to check that the WMI function is supported.
> > + *
> > + * On success the return value is 0, and the retval is a valid value returned
> > + * by the successful WMI function call. An error value is returned only if the
> > + * WMI function failed.
> > + */
> > +int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval)
> > {
> > return asus_wmi_evaluate_method(ASUS_WMI_METHODID_DEVS, dev_id,
> > ctrl_param, retval);
> > }
> > +EXPORT_SYMBOL_NS_GPL(asus_wmi_set_devstate, ASUS_WMI);
> >
> > /* Helper for special devices with magic return codes */
> > static int asus_wmi_get_devstate_bits(struct asus_wmi *asus,
> > @@ -4774,8 +4806,7 @@ static int asus_wmi_add(struct platform_device *pdev)
> > asus->egpu_enable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_EGPU);
> > asus->dgpu_disable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_DGPU);
> > asus->kbd_rgb_state_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_STATE);
> > - asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE)
> > - && dmi_check_system(asus_ally_mcu_quirk);
> > + asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE);
> >
> > if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE))
> > asus->mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE;
> > diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h
> > index d02f15fd3482..c66e970b3674 100644
> > --- a/drivers/platform/x86/asus-wmi.h
> > +++ b/drivers/platform/x86/asus-wmi.h
> > @@ -86,4 +86,18 @@ struct asus_wmi_driver {
> > int asus_wmi_register_driver(struct asus_wmi_driver *driver);
> > void asus_wmi_unregister_driver(struct asus_wmi_driver *driver);
> >
> > +static const struct dmi_system_id asus_rog_ally_device[] = {
> > + {
> > + .matches = {
> > + DMI_MATCH(DMI_BOARD_NAME, "RC71L"),
> > + },
> > + },
> > + {
> > + .matches = {
> > + DMI_MATCH(DMI_BOARD_NAME, "RC72L"),
> > + },
> > + },
> > + { },
> > +};
> > +
> > #endif /* !_ASUS_WMI_H_ */
> > diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
> > index 365e119bebaa..7caf2c7ed8c9 100644
> > --- a/include/linux/platform_data/x86/asus-wmi.h
> > +++ b/include/linux/platform_data/x86/asus-wmi.h
> > @@ -73,6 +73,7 @@
> > #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019
> >
> > /* Misc */
> > +#define ASUS_WMI_DEVID_PANEL_HD 0x0005001C
> > #define ASUS_WMI_DEVID_PANEL_OD 0x00050019
> > #define ASUS_WMI_DEVID_CAMERA 0x00060013
> > #define ASUS_WMI_DEVID_LID_FLIP 0x00060062
> > @@ -158,8 +159,18 @@
> > #define ASUS_WMI_DSTS_LIGHTBAR_MASK 0x0000000F
> >
> > #if IS_REACHABLE(CONFIG_ASUS_WMI)
> > +int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval);
> > +int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval);
> > int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval);
> > #else
> > +static inline int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval)
> > +{
> > + return -ENODEV;
> > +}
> > +static inline int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval)
> > +{
> > + return -ENODEV;
> > +}
> > static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1,
> > u32 *retval)
> > {
>
>
Powered by blists - more mailing lists