[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240920101820.44850-7-kfting@nuvoton.com>
Date: Fri, 20 Sep 2024 18:18:20 +0800
From: warp5tw@...il.com
To: avifishman70@...il.com,
tmaimon77@...il.com,
tali.perry1@...il.com,
venture@...gle.com,
yuenn@...gle.com,
benjaminfair@...gle.com,
andi.shyti@...nel.org,
andriy.shevchenko@...ux.intel.com,
wsa@...nel.org,
rand.sec96@...il.com,
wsa+renesas@...g-engineering.com,
warp5tw@...il.com,
tali.perry@...oton.com,
Avi.Fishman@...oton.com,
tomer.maimon@...oton.com,
KWLIU@...oton.com,
JJLIU0@...oton.com,
kfting@...oton.com
Cc: openbmc@...ts.ozlabs.org,
linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org,
Charles Boyer <Charles.Boyer@...-usa.com>,
Vivekanand Veeracholan <vveerach@...gle.com>
Subject: [PATCH v4 6/6] i2c: npcm: Enable slave in eob interrupt
From: Charles Boyer <Charles.Boyer@...-usa.com>
Nuvoton slave enable was in user space API call master_xfer, so it is
subject to delays from the OS scheduler. If the BMC is not enabled for
slave mode in time for master to send response, then it will NAK the
address match. Then the PLDM request timeout occurs.
If the slave enable is moved to the EOB interrupt service routine, then
the BMC can be ready in slave mode by the time it needs to receive a
response.
Signed-off-by: Charles Boyer <Charles.Boyer@...-usa.com>
Signed-off-by: Vivekanand Veeracholan <vveerach@...gle.com>
Signed-off-by: Tyrone Ting <kfting@...oton.com>
Reviewed-by: Tali Perry <tali.perry1@...il.com>
---
drivers/i2c/busses/i2c-npcm7xx.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 9d533873e477..aa3310afbf6d 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -1925,6 +1925,12 @@ static int npcm_i2c_int_master_handler(struct npcm_i2c *bus)
(FIELD_GET(NPCM_I2CCST3_EO_BUSY,
ioread8(bus->reg + NPCM_I2CCST3)))) {
npcm_i2c_irq_handle_eob(bus);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* reenable slave if it was enabled */
+ if (bus->slave)
+ iowrite8((bus->slave->addr & 0x7F) | NPCM_I2CADDR_SAEN,
+ bus->reg + NPCM_I2CADDR1);
+#endif
return 0;
}
--
2.34.1
Powered by blists - more mailing lists