Message-ID: <slxeitknraechwzofwfq643ewy4ptmvy5oohxpdup5hf3rb5e4@lx32gcrjho4c>
Date: Sat, 21 Sep 2024 23:34:44 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Dzmitry Sankouski <dsankouski@...il.com>
Cc: Sebastian Reichel <sre@...nel.org>, 
	Bjorn Andersson <andersson@...nel.org>, Michael Turquette <mturquette@...libre.com>, 
	Stephen Boyd <sboyd@...nel.org>, Neil Armstrong <neil.armstrong@...aro.org>, 
	Jessica Zhang <quic_jesszhan@...cinc.com>, Sam Ravnborg <sam@...nborg.org>, 
	Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Maxime Ripard <mripard@...nel.org>, 
	Thomas Zimmermann <tzimmermann@...e.de>, David Airlie <airlied@...il.com>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Lee Jones <lee@...nel.org>, 
	Dmitry Torokhov <dmitry.torokhov@...il.com>, Pavel Machek <pavel@....cz>, Liam Girdwood <lgirdwood@...il.com>, 
	Mark Brown <broonie@...nel.org>, Uwe Kleine-König <ukleinek@...nel.org>, 
	Krzysztof Kozlowski <krzk@...nel.org>, Chanwoo Choi <cw00.choi@...sung.com>, 
	Simona Vetter <simona@...ll.ch>, cros-qcom-dts-watchers@...omium.org, 
	Konrad Dybcio <konradybcio@...nel.org>, Simona Vetter <simona.vetter@...ll.ch>, linux-pm@...r.kernel.org, 
	linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org, 
	dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org, linux-input@...r.kernel.org, 
	linux-leds@...r.kernel.org, linux-pwm@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Subject: Re: [PATCH v4 07/27] drm/panel: Add support for S6E3HA8 panel driver

On Fri, Sep 13, 2024 at 06:07:50PM GMT, Dzmitry Sankouski wrote:
> Add support for MIPI-DSI based S6E3HA8 AMOLED panel
> driver. This panel has 1440x2960 resolution, 5.8-inch physical
> size, and can be found in starqltechn device.
> Brightness regulation is not yet supported.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@...il.com>
> 
> Changes in v4:
> - inline power related functions
> - rework driver using new mipi_dsi_dcs_write_seq_multi macro
> - use drm_connector_helper_get_modes_fixed for modes
> - remove excessive compression setting
> ---
>  MAINTAINERS                                   |   1 +
>  drivers/gpu/drm/panel/Kconfig                 |   7 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c | 350 ++++++++++++++++++++++++++
>  4 files changed, 359 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 92135252264a..65cb2511ba22 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7385,6 +7385,7 @@ DRM DRIVER FOR SAMSUNG S6E3HA8 PANELS
>  M:	Dzmitry Sankouski <dsankouski@...il.com>
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/display/panel/samsung,s6e3ha8.yaml
> +F:	drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
>  
>  DRM DRIVER FOR SITRONIX ST7586 PANELS
>  M:	David Lechner <david@...hnology.com>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index d3a9a9fafe4e..65fb3a466e39 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -689,6 +689,13 @@ config DRM_PANEL_SAMSUNG_S6E3HA2
>  	depends on BACKLIGHT_CLASS_DEVICE
>  	select VIDEOMODE_HELPERS
>  
> +config DRM_PANEL_SAMSUNG_S6E3HA8
> +	tristate "Samsung S6E3HA8 DSI video mode panel"
> +	depends on OF
> +	depends on DRM_MIPI_DSI
> +	depends on BACKLIGHT_CLASS_DEVICE
> +	select VIDEOMODE_HELPERS
> +
>  config DRM_PANEL_SAMSUNG_S6E63J0X03
>  	tristate "Samsung S6E63J0X03 DSI command mode panel"
>  	depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 987a08702410..8ee28f5a2213 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -70,6 +70,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D27A1) += panel-samsung-s6d27a1.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0) += panel-samsung-s6d7aa0.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3FA7) += panel-samsung-s6e3fa7.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA8) += panel-samsung-s6e3ha8.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o
>  obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI) += panel-samsung-s6e63m0-spi.o
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> new file mode 100644
> index 000000000000..e69943f0527e
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> @@ -0,0 +1,350 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> +//	Copyright (c) 2013, The Linux Foundation. All rights reserved.
> +// Copyright (c) 2024 Dzmitry Sankouski <dsankouski@...il.com>
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/display/drm_dsc.h>
> +#include <drm/display/drm_dsc_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_panel.h>
> +
> +struct s6e3ha8 {
> +	struct drm_panel panel;
> +	struct mipi_dsi_device *dsi;
> +	struct drm_dsc_config dsc;
> +	struct gpio_desc *reset_gpio;
> +	struct regulator_bulk_data supplies[3];
> +};
> +
> +static inline
> +struct s6e3ha8 *to_s6e3ha8_amb577px01_wqhd(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct s6e3ha8, panel);
> +}
> +
> +#define s6e3ha8_test_key_on_lvl2(ctx) \
> +	mipi_dsi_dcs_write_seq_multi(ctx, 0xf0, 0x5a, 0x5a)
> +#define s6e3ha8_test_key_off_lvl2(ctx) \
> +	mipi_dsi_dcs_write_seq_multi(ctx, 0xf0, 0xa5, 0xa5)
> +#define s6e3ha8_test_key_on_lvl3(ctx) \
> +	mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0x5a, 0x5a)
> +#define s6e3ha8_test_key_off_lvl3(ctx) \
> +	mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0xa5, 0xa5)
> +#define s6e3ha8_test_key_on_lvl1(ctx) \
> +	mipi_dsi_dcs_write_seq_multi(ctx, 0x9f, 0xa5, 0xa5)
> +#define s6e3ha8_test_key_off_lvl1(ctx) \
> +	mipi_dsi_dcs_write_seq_multi(ctx, 0x9f, 0x5a, 0x5a)
> +#define s6e3ha8_afc_off(ctx) \
> +	mipi_dsi_dcs_write_seq_multi(ctx, 0xe2, 0x00, 0x00)
> +
> +static void s6e3ha8_amb577px01_wqhd_reset(struct s6e3ha8 *priv)
> +{
> +	gpiod_set_value_cansleep(priv->reset_gpio, 1);
> +	usleep_range(5000, 6000);
> +	gpiod_set_value_cansleep(priv->reset_gpio, 0);
> +	usleep_range(5000, 6000);
> +	gpiod_set_value_cansleep(priv->reset_gpio, 1);
> +	usleep_range(5000, 6000);
> +}
> +
> +static int s6e3ha8_amb577px01_wqhd_on(struct s6e3ha8 *priv)
> +{
> +	struct mipi_dsi_device *dsi = priv->dsi;
> +	struct device *dev = &dsi->dev;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	s6e3ha8_test_key_on_lvl1(&ctx);
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +
> +	ret = mipi_dsi_compression_mode(dsi, true);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set compression mode: %d\n", ret);
> +		return ret;
> +	}
> +
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +
> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	usleep_range(5000, 6000);
> +
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x13);
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +
> +	usleep_range(10000, 11000);
> +
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x13);
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +
> +	/* OMOK setting 1 (Initial setting) - Scaler Latch Setting Guide */
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x07);
> +	/* latch setting 1 : Scaler on/off & address setting & PPS setting -> Image update latch */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x3c, 0x10);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x0b);
> +	/* latch setting 2 : Ratio change mode -> Image update latch */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x30);
> +	/* OMOK setting 2 - Seamless setting guide : WQHD */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0x2a, 0x00, 0x00, 0x05, 0x9f); /* CASET */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0x2b, 0x00, 0x00, 0x0b, 0x8f); /* PASET */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xba, 0x01); /* scaler setup : scaler off */
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0x35, 0x00); /* TE Vsync ON */
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xed, 0x4c); /* ERR_FG */
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +	s6e3ha8_test_key_on_lvl3(&ctx);
> +	/* FFC Setting 897.6Mbps */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xc5, 0x0d, 0x10, 0xb4, 0x3e, 0x01);
> +	s6e3ha8_test_key_off_lvl3(&ctx);
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xb9,
> +				   0x00, 0xb0, 0x81, 0x09, 0x00, 0x00, 0x00,
> +				   0x11, 0x03); /* TSP HSYNC Setting */
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x03);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xf6, 0x43);
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	/* Brightness condition set */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xca,
> +				   0x07, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
> +				   0x80, 0x80, 0x80, 0x00, 0x00, 0x00);
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xb1, 0x00, 0x0c); /* AID Set : 0% */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xb5,
> +				   0x19, 0xdc, 0x16, 0x01, 0x34, 0x67, 0x9a,
> +				   0xcd, 0x01, 0x22, 0x33, 0x44, 0x00, 0x00,
> +				   0x05, 0x55, 0xcc, 0x0c, 0x01, 0x11, 0x11,
> +				   0x10); /* MPS/ELVSS Setting */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xf4, 0xeb, 0x28); /* VINT */
> +	mipi_dsi_dcs_write_seq_multi(&ctx, 0xf7, 0x03); /* Gamma, LTPS(AID) update */
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +	s6e3ha8_test_key_off_lvl1(&ctx);
> +
> +	return 0;

return ctx.accum_err;

> +}
> +
> +static int s6e3ha8_enable(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> +	struct mipi_dsi_device *dsi = priv->dsi;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +
> +	s6e3ha8_test_key_on_lvl1(&ctx);
> +	ctx.accum_err = mipi_dsi_dcs_set_display_on(dsi);
> +	s6e3ha8_test_key_off_lvl1(&ctx);
> +
> +	return ctx.accum_err;
> +}
> +
> +static int s6e3ha8_disable(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> +	struct mipi_dsi_device *dsi = priv->dsi;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +
> +	s6e3ha8_test_key_on_lvl1(&ctx);
> +	ctx.accum_err = mipi_dsi_dcs_set_display_off(dsi);
> +	s6e3ha8_test_key_off_lvl1(&ctx);
> +	msleep(20);
> +
> +	s6e3ha8_test_key_on_lvl2(&ctx);
> +	s6e3ha8_afc_off(&ctx);
> +	s6e3ha8_test_key_off_lvl2(&ctx);
> +
> +	msleep(160);
> +
> +	return 0;
> +}
> +
> +static int s6e3ha8_amb577px01_wqhd_prepare(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> +	struct mipi_dsi_device *dsi = priv->dsi;
> +	struct device *dev = &dsi->dev;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +	struct drm_dsc_picture_parameter_set pps;
> +	int ret;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
> +	if (ret < 0)
> +		return ret;
> +	msleep(120);
> +	s6e3ha8_amb577px01_wqhd_reset(priv);

empty line

> +	ret = s6e3ha8_amb577px01_wqhd_on(priv);
> +

no empty line

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to initialize panel: %d\n", ret);

_multi functions will say that for you already.

> +		gpiod_set_value_cansleep(priv->reset_gpio, 1);
> +		goto err;
> +	}
> +
> +	drm_dsc_pps_payload_pack(&pps, &priv->dsc);
> +
> +	s6e3ha8_test_key_on_lvl1(&ctx);
> +	ret = mipi_dsi_picture_parameter_set(priv->dsi, &pps);

Probably we should add _multi version here, could you please add it?
Otherwise you might have missed the fact that previous function has
failed.

> +	if (ret < 0) {
> +		dev_err(panel->dev, "failed to transmit PPS: %d\n", ret);
> +		return ret;
> +	}
> +	s6e3ha8_test_key_off_lvl1(&ctx);
> +
> +	msleep(28);

mipi_dsi_msleep

> +
> +	return 0;


handle ctx.accum_err please.


> +err:
> +	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
> +	return ret;
> +}
> +
> +static int s6e3ha8_amb577px01_wqhd_unprepare(struct drm_panel *panel)
> +{
> +	struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> +
> +	return regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
> +}
> +
> +static const struct drm_display_mode s6e3ha8_amb577px01_wqhd_mode = {
> +	.clock = (1440 + 116 + 44 + 120) * (2960 + 120 + 80 + 124) * 60 / 1000,
> +	.hdisplay = 1440,
> +	.hsync_start = 1440 + 116,
> +	.hsync_end = 1440 + 116 + 44,
> +	.htotal = 1440 + 116 + 44 + 120,
> +	.vdisplay = 2960,
> +	.vsync_start = 2960 + 120,
> +	.vsync_end = 2960 + 120 + 80,
> +	.vtotal = 2960 + 120 + 80 + 124,
> +	.width_mm = 64,
> +	.height_mm = 132,
> +};
> +
> +static int s6e3ha8_amb577px01_wqhd_get_modes(struct drm_panel *panel,
> +					     struct drm_connector *connector)
> +{
> +	return drm_connector_helper_get_modes_fixed(connector, &s6e3ha8_amb577px01_wqhd_mode);
> +}
> +
> +static const struct drm_panel_funcs s6e3ha8_amb577px01_wqhd_panel_funcs = {
> +	.prepare = s6e3ha8_amb577px01_wqhd_prepare,
> +	.unprepare = s6e3ha8_amb577px01_wqhd_unprepare,
> +	.get_modes = s6e3ha8_amb577px01_wqhd_get_modes,
> +	.enable = s6e3ha8_enable,
> +	.disable = s6e3ha8_disable,
> +};
> +
> +static int s6e3ha8_amb577px01_wqhd_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct s6e3ha8 *priv;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->supplies[0].supply = "vdd3";
> +	priv->supplies[1].supply = "vci";
> +	priv->supplies[2].supply = "vddr";
> +
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
> +				      priv->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to get regulators: %d\n", ret);
> +		return ret;
> +	}
> +
> +	priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(priv->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
> +				     "Failed to get reset-gpios\n");
> +
> +	priv->dsi = dsi;
> +	mipi_dsi_set_drvdata(dsi, priv);
> +
> +	dsi->lanes = 4;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
> +		MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP |
> +		MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET;
> +
> +	drm_panel_init(&priv->panel, dev, &s6e3ha8_amb577px01_wqhd_panel_funcs,
> +		       DRM_MODE_CONNECTOR_DSI);
> +	priv->panel.prepare_prev_first = true;
> +
> +	drm_panel_add(&priv->panel);
> +
> +	/* This panel only supports DSC; unconditionally enable it */
> +	dsi->dsc = &priv->dsc;
> +
> +	priv->dsc.dsc_version_major = 1;
> +	priv->dsc.dsc_version_minor = 1;
> +
> +	priv->dsc.slice_height = 40;
> +	priv->dsc.slice_width = 720;
> +	WARN_ON(1440 % priv->dsc.slice_width);
> +	priv->dsc.slice_count = 1440 / priv->dsc.slice_width;
> +	priv->dsc.bits_per_component = 8;
> +	priv->dsc.bits_per_pixel = 8 << 4; /* 4 fractional bits */
> +	priv->dsc.block_pred_enable = true;
> +
> +	ret = mipi_dsi_attach(dsi);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> +		drm_panel_remove(&priv->panel);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void s6e3ha8_amb577px01_wqhd_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct s6e3ha8 *priv = mipi_dsi_get_drvdata(dsi);
> +	int ret;
> +
> +	ret = mipi_dsi_detach(dsi);
> +	if (ret < 0)
> +		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> +	drm_panel_remove(&priv->panel);
> +}
> +
> +static const struct of_device_id s6e3ha8_amb577px01_wqhd_of_match[] = {
> +	{ .compatible = "samsung,s6e3ha8" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, s6e3ha8_amb577px01_wqhd_of_match);
> +
> +static struct mipi_dsi_driver s6e3ha8_amb577px01_wqhd_driver = {
> +	.probe = s6e3ha8_amb577px01_wqhd_probe,
> +	.remove = s6e3ha8_amb577px01_wqhd_remove,
> +	.driver = {
> +		.name = "panel-s6e3ha8",
> +		.of_match_table = s6e3ha8_amb577px01_wqhd_of_match,
> +	},
> +};
> +module_mipi_dsi_driver(s6e3ha8_amb577px01_wqhd_driver);
> +
> +MODULE_AUTHOR("Dzmitry Sankouski <dsankouski@...il.com>");
> +MODULE_DESCRIPTION("DRM driver for S6E3HA8 panel");
> +MODULE_LICENSE("GPL");
> 
> -- 
> 2.39.2
> 

-- 
With best wishes
Dmitry

Powered by blists - more mailing lists