[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240922112113.251431-1-flokli@flokli.de>
Date: Sun, 22 Sep 2024 14:21:03 +0300
From: Florian Klink <flokli@...kli.de>
To:
Cc: Florian Klink <flokli@...kli.de>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Dragan Simic <dsimic@...jaro.org>,
Tamás Szűcs <tszucs@...tonmail.ch>,
Ondrej Jirman <megi@....cz>,
Muhammed Efe Cetin <efectn@...tonmail.com>,
FUKAUMI Naoki <naoki@...xa.com>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: rockchip: enable automatic fan control on Orange Pi 5+
This links the PWM fan on Orange Pi 5+ as an active cooling device
managed automatically by the thermal subsystem, with a target SoC
temperature of 65C and a minimum-spin interval from 55C to 65C to
ensure airflow when the system gets warm.
This is pretty much the same as '4a152231b050 ("arm64: dts: rockchip:
enable automatic fan control on Rock 5B")', except for the Orange Pi
5+ board.
Signed-off-by: Florian Klink <flokli@...kli.de>
---
.../dts/rockchip/rk3588-orangepi-5-plus.dts | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index e74871491ef5..d91438752006 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -351,6 +351,36 @@ &i2s2m0_sdi
status = "okay";
};
+&package_thermal {
+ polling-delay = <1000>;
+
+ trips {
+ package_fan0: package-fan0 {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&package_fan0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map1 {
+ trip = <&package_fan1>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
/* phy1 - M.KEY socket */
&pcie2x1l0 {
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
--
2.46.0
Powered by blists - more mailing lists