[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20240923-spirited-wealthy-pelican-4e15dc@penduick>
Date: Mon, 23 Sep 2024 10:19:46 +0200
From: Maxime Ripard <mripard@...nel.org>
To: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
Cc: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>, Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>, Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Thomas Zimmermann <tzimmermann@...e.de>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>, Sandy Huang <hjc@...k-chips.com>,
Heiko Stübner <heiko@...ech.de>, Andy Yan <andy.yan@...k-chips.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Mark Yao <markyao0591@...il.com>,
Sascha Hauer <s.hauer@...gutronix.de>, dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
kernel@...labora.com, Alexandre ARNOUD <aarnoud@...com>,
Luis de Arquer <ldearquer@...il.com>, Algea Cao <algea.cao@...k-chips.com>
Subject: Re: [PATCH v6 1/3] drm/bridge: synopsys: Add DW HDMI QP TX
Controller support library
On Sat, Sep 14, 2024 at 10:12:29PM GMT, Cristian Ciocaltea wrote:
> Hi Maxime,
>
> On 9/9/24 6:13 PM, Maxime Ripard wrote:
> > Hi,
> >
> > On Fri, Sep 06, 2024 at 04:17:40AM GMT, Cristian Ciocaltea wrote:
> >> +static enum drm_connector_status
> >> +dw_hdmi_qp_bridge_detect(struct drm_bridge *bridge)
> >> +{
> >> + struct dw_hdmi_qp *hdmi = bridge->driver_private;
> >> + enum drm_connector_status status;
> >> +
> >> + status = hdmi->phy.ops->read_hpd(hdmi, hdmi->phy.data);
> >> +
> >> + dev_dbg(hdmi->dev, "%s conn=%d scramb=%d\n", __func__,
> >> + status == connector_status_connected, hdmi->scramb_enabled);
> >> +
> >> + if (hdmi->scramb_enabled) {
> >> + cancel_delayed_work_sync(&hdmi->scramb_work);
> >> +
> >> + if (status == connector_status_connected)
> >> + dw_hdmi_qp_check_and_set_scramb(hdmi);
> >> + }
> >> +
> >> + return status;
> >> +}
> >
> > Unfortunately, that won't work. The HDMI Spec has (HDMI 2.0, Section
> > 6.1.3.1 - Scrambling Control):
> >
> > The minimum time period between the write to the Scrambling_Enable bit,
> > and the transmission of a scrambled video signal is not specified;
> > however the Source shall not begin transmission of a scrambled video
> > signal before writing a 1 to the Scrambling_Enable bit. The maximum time
> > period between the write to the Scrambling_Enable bit and the
> > transmission of a scrambled video signal shall be 100 ms.
> >
> > So you need to disable the output and enable it again.
> >
> > vc4 does just that, you can have a look here:
> > https://elixir.bootlin.com/linux/v6.10.9/source/drivers/gpu/drm/vc4/vc4_hdmi.c#L410
>
> Thanks for all the details and references!
>
> Unfortunately I had to drop the scrambling setup for now [1], as I
> encountered some issues while attempting to get this implemented as
> suggested. Will get back to this and submit it separately when done.
Yeah, I think that's the best way forward for now :)
Maxime
Download attachment "signature.asc" of type "application/pgp-signature" (274 bytes)
Powered by blists - more mailing lists