| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240923113150.24711-3-quic_mukhopad@quicinc.com>
Date: Mon, 23 Sep 2024 17:01:47 +0530
From: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>
To: vkoul@...nel.org, kishon@...nel.org, konradybcio@...nel.org,
andersson@...nel.org, simona@...ll.ch, dmitry.baryshkov@...aro.org,
abel.vesa@...aro.org, robdclark@...il.com, quic_abhinavk@...cinc.com,
sean@...rly.run, marijn.suijten@...ainline.org, airlied@...il.com,
daniel@...ll.ch, maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
tzimmermann@...e.de, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, quic_khsieh@...cinc.com, konrad.dybcio@...aro.org,
quic_parellan@...cinc.com, quic_bjorande@...cinc.com
Cc: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
quic_riteshk@...cinc.com, quic_vproddut@...cinc.com
Subject: [PATCH v3 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
In order to support different HW versions, introduce aux_cfg array
to move v4 specific aux configuration settings.
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>
---
v2: Fixed review comments from Bjorn and Dmitry
- Made aux_cfg array as const.
v3: Fixed review comments from Dmitry
- Used a for loop to write the dp_phy_aux_cfg registers.
- Pre-defined the aux_cfg size to prevent any magic numbers.
---
drivers/phy/qualcomm/phy-qcom-edp.c | 41 ++++++++++++-----------------
1 file changed, 17 insertions(+), 24 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index da2b32fb5b45..2ecff164ec44 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -32,16 +32,8 @@
#define DP_PHY_PD_CTL 0x001c
#define DP_PHY_MODE 0x0020
-#define DP_PHY_AUX_CFG0 0x0024
-#define DP_PHY_AUX_CFG1 0x0028
-#define DP_PHY_AUX_CFG2 0x002C
-#define DP_PHY_AUX_CFG3 0x0030
-#define DP_PHY_AUX_CFG4 0x0034
-#define DP_PHY_AUX_CFG5 0x0038
-#define DP_PHY_AUX_CFG6 0x003C
-#define DP_PHY_AUX_CFG7 0x0040
-#define DP_PHY_AUX_CFG8 0x0044
-#define DP_PHY_AUX_CFG9 0x0048
+#define DP_AUX_CFG_SIZE 10
+#define DP_PHY_AUX_CFG(n) (0x24 + (0x04 * (n)))
#define DP_PHY_AUX_INTERRUPT_MASK 0x0058
@@ -90,6 +82,7 @@ struct phy_ver_ops {
struct qcom_edp_phy_cfg {
bool is_edp;
+ const u8 *aux_cfg;
const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
const struct phy_ver_ops *ver_ops;
};
@@ -186,11 +179,15 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
};
+static const u8 edp_phy_aux_cfg_v4[10] = {
+ 0x00, 0x13, 0x24, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03
+};
+
static int qcom_edp_phy_init(struct phy *phy)
{
struct qcom_edp *edp = phy_get_drvdata(phy);
+ u8 aux_cfg[DP_AUX_CFG_SIZE];
int ret;
- u8 cfg8;
ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
if (ret)
@@ -200,6 +197,8 @@ static int qcom_edp_phy_init(struct phy *phy)
if (ret)
goto out_disable_supplies;
+ memcpy(aux_cfg, edp->cfg->aux_cfg, sizeof(aux_cfg));
+
writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
edp->edp + DP_PHY_PD_CTL);
@@ -222,22 +221,12 @@ static int qcom_edp_phy_init(struct phy *phy)
* even needed.
*/
if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
- cfg8 = 0xb7;
- else
- cfg8 = 0x37;
+ aux_cfg[8] = 0xb7;
writel(0xfc, edp->edp + DP_PHY_MODE);
- writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
- writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
- writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
- writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
- writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
- writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
- writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
- writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
- writel(cfg8, edp->edp + DP_PHY_AUX_CFG8);
- writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
+ for (int i = 0; i < DP_AUX_CFG_SIZE; i++)
+ writel(aux_cfg[i], edp->edp + DP_PHY_AUX_CFG(i));
writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
@@ -519,16 +508,19 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
};
static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
+ .aux_cfg = edp_phy_aux_cfg_v4,
.ver_ops = &qcom_edp_phy_ops_v4,
};
static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
+ .aux_cfg = edp_phy_aux_cfg_v4,
.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
.ver_ops = &qcom_edp_phy_ops_v4,
};
static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
.is_edp = true,
+ .aux_cfg = edp_phy_aux_cfg_v4,
.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
.ver_ops = &qcom_edp_phy_ops_v4,
};
@@ -707,6 +699,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
};
static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
+ .aux_cfg = edp_phy_aux_cfg_v4,
.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
.ver_ops = &qcom_edp_phy_ops_v6,
};
--
2.17.1
Powered by blists - more mailing lists