linux-kernel - Re: [PATCH v3 5/6] PCI: qcom: Add new cfg and ops without config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20240923140025.4qhguusbhiajf3xa@thinkpad>
Date: Mon, 23 Sep 2024 16:00:25 +0200
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Qiang Yu <quic_qianyu@...cinc.com>
Cc: vkoul@...nel.org, kishon@...nel.org, robh@...nel.org,
	andersson@...nel.org, konradybcio@...nel.org, krzk+dt@...nel.org,
	conor+dt@...nel.org, mturquette@...libre.com, sboyd@...nel.org,
	abel.vesa@...aro.org, quic_msarkar@...cinc.com,
	quic_devipriy@...cinc.com, dmitry.baryshkov@...aro.org,
	kw@...ux.com, lpieralisi@...nel.org, neil.armstrong@...aro.org,
	linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
	linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
	devicetree@...r.kernel.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH v3 5/6] PCI: qcom: Add new cfg and ops without config_sid
 callback for X1E80100

On Mon, Sep 23, 2024 at 05:57:12AM -0700, Qiang Yu wrote:

No need to mention the ops/cfg in subject. It is a detail for patch description.
So use:

"PCI: qcom: Add support for X1E80100 SoC"

Also add some information about the IP capability. Like what speed/gen version
it supports, lane width etc...

> Currently the ops_1_9_0 which is being used for X1E80100 has config_sid
> callback to config BDF to SID table. However, this callback is not
> required for X1E80100 because it has smmuv3 support and BDF to SID table
> will be not present.
> 
> Hence introduce cfg_1_38_0 and ops_1_38_0 with config_sid callback being
> NULL since X1E80100 has IP version 1.38.0.
> 

I'd rewrite the last sentence as below:

"Hence add support for X1E80100 by introducing a new ops and cfg structures that
don't require the config_sid callback. This could be reused by the future
platforms based on SMMUv3."

- Mani

> Signed-off-by: Qiang Yu <quic_qianyu@...cinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 88a98be930e3..56ba8bc72f78 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
>  	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>  };
>  
> +/* Qcom IP rev.: 1.38.0 */
> +static const struct qcom_pcie_ops ops_1_38_0 = {
> +	.get_resources = qcom_pcie_get_resources_2_7_0,
> +	.init = qcom_pcie_init_2_7_0,
> +	.post_init = qcom_pcie_post_init_2_7_0,
> +	.host_post_init = qcom_pcie_host_post_init_2_7_0,
> +	.deinit = qcom_pcie_deinit_2_7_0,
> +	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +};
> +
>  static const struct qcom_pcie_cfg cfg_1_0_0 = {
>  	.ops = &ops_1_0_0,
>  };
> @@ -1409,6 +1419,10 @@ static const struct qcom_pcie_cfg cfg_sc8280xp = {
>  	.no_l0s = true,
>  };
>  
> +static const struct qcom_pcie_cfg cfg_1_38_0 = {
> +	.ops = &ops_1_38_0,
> +};
> +
>  static const struct dw_pcie_ops dw_pcie_ops = {
>  	.link_up = qcom_pcie_link_up,
>  	.start_link = qcom_pcie_start_link,
> @@ -1837,7 +1851,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
>  	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
>  	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
> -	{ .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_9_0 },
> +	{ .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_38_0 },
>  	{ }
>  };
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்