| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZvG7SXfxhlu684OP@lizhi-Precision-Tower-5810>
Date: Mon, 23 Sep 2024 15:02:33 -0400
From: Frank Li <Frank.li@....com>
To: Rob Herring <robh@...nel.org>
Cc: Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Abraham I <kishon@...nel.org>,
Saravana Kannan <saravanak@...gle.com>,
Jingoo Han <jingoohan1@...il.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Jesper Nilsson <jesper.nilsson@...s.com>,
Richard Zhu <hongxing.zhu@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...s.com, linux-arm-kernel@...ts.infradead.org,
imx@...ts.linux.dev,
Krzysztof Wilczyński <kwilczynski@...nel.org>
Subject: Re: [PATCH 0/9] PCI-EP: Add 'ranges' support for PCI endpoint devices
On Mon, Sep 23, 2024 at 12:14:27PM -0400, Frank Li wrote:
> On Sat, Sep 21, 2024 at 03:18:50PM -0400, Frank Li wrote:
> > On Sat, Sep 21, 2024 at 09:43:17AM -0500, Rob Herring wrote:
> > > On Thu, Sep 19, 2024 at 5:03 PM Frank Li <Frank.Li@....com> wrote:
> > > >
> > > > The PCI bus device tree supports 'ranges' properties that indicate
> > > > how to convert PCI addresses to CPU addresses. Many PCI controllers
> > > > are dual-role controllers, supporting both Root Complex (RC) and
> > > > Endpoint (EP) modes. The EP side also needs similar information for
> > > > proper address translation.
> > > >
> > > > This commit introduces several changes to add 'ranges' support for
> > > > PCI endpoint devices:
> > > >
> > > > 1. **Modify of_address.c**: Add support for the new `device_type`
> > > > "pci-ep", enabling it to parse 'ranges' using the same functions
> > > > as for PCI devices.
> > > >
> > > > 2. **Update DesignWare PCIe EP driver**: Enhance the driver to
> > > > support 'ranges' when 'addr_space' is missing, maintaining
> > > > compatibility with existing drivers.
> > > >
> > > > 3. **Update binding documentation**: Modify the device tree bindings
> > > > to include 'ranges' support and make 'addr_space' an optional
> > > > entry in 'reg-names'.
> > > >
> > > > 4. **Add i.MX8QXP EP support**: Incorporate support for the
> > > > i.MX8QXP PCIe EP in the driver.
> > > >
> > > > i.MX8QXP PCIe dts is upstreaming. Below is pcie-ep part.
> > > >
> > > > pcieb_ep: pcie-ep@...10000 {
> > > > compatible = "fsl,imx8q-pcie-ep";
> > > > reg = <0x5f010000 0x00010000>;
> > > > reg-names = "dbi";
> > > > #address-cells = <3>;
> > > > #size-cells = <2>;
> > > > device_type = "pci-ep";
> > > > ranges = <0x82000000 0 0x80000000 0x70000000 0 0x10000000>;
> > >
> > > How does a PCI endpoint set PCI addresses? Those get assigned by the
> > > PCI host system. They can't be static in DT.
> >
> > PCI address is set by other channel, such as RC write some place in bar0.
> >
> > It indicates EP side outbound windows mapping. See below detail.
> >
> >
> > Endpoint Root complex
> > ┌───────┐ ┌─────────┐
> > ┌─────┐ │ EP │ │ │ ┌─────┐
> > │ │ │ Ctrl │ │ │ │ CPU │
> > │ DDR │ │ │ │ ┌────┐ │ └──┬──┘
> > │ │◄──────┼─ATU ◄─┼────────┼─┤BarN│◄─┼─────────┘
> > │ │ │ │ │ └────┘ │ Outbound Transfer
> > └─────┘ │ │ │ │
> > │ │ │ │
> > │ │ │ │
> > │ │ │ │ Inbound Transfer
> > │ │ │ │ ┌──▼──┐
> > ┌───────┐ │ │ │ ┌───────┼─────►│DDR │
> > │ │ outbound Transfer* │ │ │ └─────┘
> > ┌─────┐ │ Bus ┼─────►│ ATU ─┬────────┼─┘ │
> > │ │ │ Fabric│Bus │ │ PCI Addr │
> > │ CPU ├───►│ │Addr │ │ 0xA000_0000 │
> > │ │CPU │ │0x8000_0000 │ │ │
> > └─────┘Addr└───────┘ │ │ │ │
> > 0x7000_0000 └───────┘ └─────────┘
> >
> >
> > This ranges descript above diagram Endpoint outbound Transfer*'s
> > information. There are address space (previous use addr_space in reg-name)
> > indicate such informaiton, such as [0x7000_00000, 0xB000_0000] as PCI EP
> > outbound windows. when cpu write 0x7000_0000, data will write to EP ctrl,
> > the ATU in EP ctrl convert to PCI address such 0xA000,0000, then write
> > to RC's DDR>
> >
> > The PCI Addr 0xA000_0000 information was sent to EP driver by use other
> > channel, such as RC write it some place in Bar0.
> >
> > The 'range' here indicated EP side's outbound windows information. Most
> > system CPU address is the same as bus address. but in imx8q, it is
> > difference. Bus fabric convert 0x7000_0000 to 0x8000_00000.
> >
> > So need range indicate such address convertion.
> >
> > >
> > > If you need the PCI address, just read your BAR registers.
> > >
> > > In general, why do you need this when none of the other PCI endpoint
> > > drivers have needed this?
> >
> > Most system, the address is the same. Some system convert is simple, just
> > cut some high address bit, so their driver hardcode it. Maybe imx8QM have
> > first one, they have more than one controller and address map is not
> > such simple.
> >
> > We use customer dt property in downstream kernel, but I think common
> > solution should be better, other drivers can remove their hardcode in
> > future. And it will be more symmetry with PCI host side's property.
>
> I found a more simple the method, will post v2 soon.
V2 post at https://lore.kernel.org/imx/20240923-pcie_ep_range-v2-0-78d2ea434d9f@nxp.com/T/#t
, which more simple and reasonable.
Frank
>
> Frank
>
> >
> > Frank
> > >
> > > Rob
Powered by blists - more mailing lists