[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <618e4514-791b-4a73-a1ba-45170a21e453@linaro.org>
Date: Tue, 24 Sep 2024 07:36:11 +0100
From: Tudor Ambarus <tudor.ambarus@...aro.org>
To: Alvin Zhou <alvinzhou.tw@...il.com>
Cc: linux-mtd@...ts.infradead.org, linux-spi@...r.kernel.org,
linux-kernel@...r.kernel.org, pratyush@...nel.org, mwalle@...nel.org,
miquel.raynal@...tlin.com, richard@....at, vigneshr@...com,
broonie@...nel.org, chengminglin@...c.com.tw, leoyu@...c.com.tw,
AlvinZhou <alvinzhou@...c.com.tw>, JaimeLiao <jaimeliao@...c.com.tw>,
Bough Chen <haibo.chen@....com>
Subject: Re: [PATCH v9 6/6] mtd: spi-nor: add support for Macronix Octal flash
On 9/24/24 7:26 AM, Tudor Ambarus wrote:
>
>
> On 9/24/24 4:25 AM, Alvin Zhou wrote:
>> Hi Tudor,
>>
>> Tudor Ambarus <tudor.ambarus@...aro.org> 於 2024年9月23日 週一 下午2:54寫道:
>>>
>>> Hi, Alvin,
>>>
>>> I quickly skimmed over the previous 5 patches and they are looking fine.
>>>
>>> I don't get this patch however.
>>>
>>> On 7/18/24 4:46 AM, AlvinZhou wrote:
>>>> From: AlvinZhou <alvinzhou@...c.com.tw>
>>>>
>>>> Adding Manufacture ID 0xC2 in last of ID table because of
>>>> Octal Flash need manufacturer fixup for enabling/disabling
>>>> Octal DTR mode.
>>>>
>>>> Signed-off-by: JaimeLiao <jaimeliao@...c.com.tw>
>>>> Signed-off-by: AlvinZhou <alvinzhou@...c.com.tw>
>>>> ---
>>>> drivers/mtd/spi-nor/macronix.c | 4 +++-
>>>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
>>>> index f039819a5252..1a8ccebdfe0e 100644
>>>> --- a/drivers/mtd/spi-nor/macronix.c
>>>> +++ b/drivers/mtd/spi-nor/macronix.c
>>>> @@ -200,7 +200,9 @@ static const struct flash_info macronix_nor_parts[] = {
>>>> .name = "mx25l3255e",
>>>> .size = SZ_4M,
>>>> .no_sfdp_flags = SECT_4K,
>>>> - }
>>>> + },
>>>> + /* Need the manufacturer fixups, Keep this last */
>>>> + { .id = SNOR_ID(0xc2) }
>>>> };
>>>>
>>>
>>> Could you please elaborate why you need just the manufacturer id here? I
>>> would have expected to see a specific flash entry instead.
>>
>> Grateful to Michael for the valuable suggestion. This addition of the
>> Macronix manufacturer ID enables the fixup functions such as
>> macronix_nor_set_octal_dtr to be executed without the need to
>> create separate ID entries for each Octal DTR NOR Flash in the
>> flash_info.
>>
>
> Ah, nice. Okay then. I'm going to review the rest of the patches. They
> look promising ;).
ah, but then you'll always have a matched ID, so you break the generic
flash probing for macronix. Is that correct?
Powered by blists - more mailing lists