[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240924101444.3933828-6-quic_qianyu@quicinc.com>
Date: Tue, 24 Sep 2024 03:14:43 -0700
From: Qiang Yu <quic_qianyu@...cinc.com>
To: manivannan.sadhasivam@...aro.org, vkoul@...nel.org, kishon@...nel.org,
robh@...nel.org, andersson@...nel.org, konradybcio@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org, mturquette@...libre.com,
sboyd@...nel.org, abel.vesa@...aro.org, quic_msarkar@...cinc.com,
quic_devipriy@...cinc.com
Cc: dmitry.baryshkov@...aro.org, kw@...ux.com, lpieralisi@...nel.org,
neil.armstrong@...aro.org, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, Qiang Yu <quic_qianyu@...cinc.com>
Subject: [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC
X1E80100 has PCIe ports that support up to Gen4 x8 based on hardware IP
version 1.38.0.
Currently the ops_1_9_0 which is being used for X1E80100 has config_sid
callback to config BDF to SID table. However, this callback is not
required for X1E80100 because it has smmuv3 support and BDF to SID table
will be not present.
Hence add support for X1E80100 by introducing a new ops and cfg structures
that don't require the config_sid callback. This could be reused by the
future platforms based on SMMUv3.
Signed-off-by: Qiang Yu <quic_qianyu@...cinc.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 88a98be930e3..56ba8bc72f78 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
};
+/* Qcom IP rev.: 1.38.0 */
+static const struct qcom_pcie_ops ops_1_38_0 = {
+ .get_resources = qcom_pcie_get_resources_2_7_0,
+ .init = qcom_pcie_init_2_7_0,
+ .post_init = qcom_pcie_post_init_2_7_0,
+ .host_post_init = qcom_pcie_host_post_init_2_7_0,
+ .deinit = qcom_pcie_deinit_2_7_0,
+ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
static const struct qcom_pcie_cfg cfg_1_0_0 = {
.ops = &ops_1_0_0,
};
@@ -1409,6 +1419,10 @@ static const struct qcom_pcie_cfg cfg_sc8280xp = {
.no_l0s = true,
};
+static const struct qcom_pcie_cfg cfg_1_38_0 = {
+ .ops = &ops_1_38_0,
+};
+
static const struct dw_pcie_ops dw_pcie_ops = {
.link_up = qcom_pcie_link_up,
.start_link = qcom_pcie_start_link,
@@ -1837,7 +1851,7 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
- { .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_9_0 },
+ { .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_38_0 },
{ }
};
--
2.34.1
Powered by blists - more mailing lists