| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAF6AEGuJ97O6m-z6UK=c1hh=VxVPidS1Thqeo+OMCr_oGHcGCQ@mail.gmail.com> Date: Wed, 25 Sep 2024 12:37:26 -0700 From: Rob Clark <robdclark@...il.com> To: Akhil P Oommen <quic_akhilpo@...cinc.com> Cc: Antonino Maniscalco <antomani103@...il.com>, Neil Armstrong <neil.armstrong@...aro.org>, Sean Paul <sean@...rly.run>, Konrad Dybcio <konrad.dybcio@...aro.org>, Abhinav Kumar <quic_abhinavk@...cinc.com>, Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Marijn Suijten <marijn.suijten@...ainline.org>, David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, Jonathan Corbet <corbet@....net>, linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org, Sharat Masetty <smasetty@...eaurora.org> Subject: Re: [PATCH v4 00/11] Preemption support for A7XX On Tue, Sep 24, 2024 at 8:22 AM Akhil P Oommen <quic_akhilpo@...cinc.com> wrote: > > On Tue, Sep 24, 2024 at 07:47:12AM -0700, Rob Clark wrote: > > On Tue, Sep 24, 2024 at 4:54 AM Antonino Maniscalco > > <antomani103@...il.com> wrote: > > > > > > On 9/20/24 7:09 PM, Akhil P Oommen wrote: > > > > On Wed, Sep 18, 2024 at 09:46:33AM +0200, Neil Armstrong wrote: > > > >> Hi, > > > >> > > > >> On 17/09/2024 13:14, Antonino Maniscalco wrote: > > > >>> This series implements preemption for A7XX targets, which allows the GPU to > > > >>> switch to an higher priority ring when work is pushed to it, reducing latency > > > >>> for high priority submissions. > > > >>> > > > >>> This series enables L1 preemption with skip_save_restore which requires > > > >>> the following userspace patches to function: > > > >>> > > > >>> https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30544 > > > >>> > > > >>> A flag is added to `msm_submitqueue_create` to only allow submissions > > > >>> from compatible userspace to be preempted, therefore maintaining > > > >>> compatibility. > > > >>> > > > >>> Preemption is currently only enabled by default on A750, it can be > > > >>> enabled on other targets through the `enable_preemption` module > > > >>> parameter. This is because more testing is required on other targets. > > > >>> > > > >>> For testing on other HW it is sufficient to set that parameter to a > > > >>> value of 1, then using the branch of mesa linked above, `TU_DEBUG=hiprio` > > > >>> allows to run any application as high priority therefore preempting > > > >>> submissions from other applications. > > > >>> > > > >>> The `msm_gpu_preemption_trigger` and `msm_gpu_preemption_irq` traces > > > >>> added in this series can be used to observe preemption's behavior as > > > >>> well as measuring preemption latency. > > > >>> > > > >>> Some commits from this series are based on a previous series to enable > > > >>> preemption on A6XX targets: > > > >>> > > > >>> https://lkml.kernel.org/1520489185-21828-1-git-send-email-smasetty@codeaurora.org > > > >>> > > > >>> Signed-off-by: Antonino Maniscalco <antomani103@...il.com> > > > >>> --- > > > >>> Changes in v4: > > > >>> - Added missing register in pwrup list > > > >>> - Removed and rearrange barriers > > > >>> - Renamed `skip_inline_wptr` to `restore_wptr` > > > >>> - Track ctx seqno per ring > > > >>> - Removed secure preempt context > > > >>> - NOP out postamble to disable it instantly > > > >>> - Only emit pwrup reglist once > > > >>> - Document bv_rptr_addr > > > >>> - Removed unused A6XX_PREEMPT_USER_RECORD_SIZE > > > >>> - Set name on preempt record buffer > > > >>> - Link to v3: https://lore.kernel.org/r/20240905-preemption-a750-t-v3-0-fd947699f7bc@gmail.com > > > >>> > > > >>> Changes in v3: > > > >>> - Added documentation about preemption > > > >>> - Use quirks to determine which target supports preemption > > > >>> - Add a module parameter to force disabling or enabling preemption > > > >>> - Clear postamble when profiling > > > >>> - Define A6XX_CP_CONTEXT_SWITCH_CNTL_LEVEL fields in a6xx.xml > > > >>> - Make preemption records MAP_PRIV > > > >>> - Removed user ctx record (NON_PRIV) and patch 2/9 as it's not needed > > > >>> anymore > > > >>> - Link to v2: https://lore.kernel.org/r/20240830-preemption-a750-t-v2-0-86aeead2cd80@gmail.com > > > >>> > > > >>> Changes in v2: > > > >>> - Added preept_record_size for X185 in PATCH 3/7 > > > >>> - Added patches to reset perf counters > > > >>> - Dropped unused defines > > > >>> - Dropped unused variable (fixes warning) > > > >>> - Only enable preemption on a750 > > > >>> - Reject MSM_SUBMITQUEUE_ALLOW_PREEMPT for unsupported targets > > > >>> - Added Akhil's Reviewed-By tags to patches 1/9,2/9,3/9 > > > >>> - Added Neil's Tested-By tags > > > >>> - Added explanation for UAPI changes in commit message > > > >>> - Link to v1: https://lore.kernel.org/r/20240815-preemption-a750-t-v1-0-7bda26c34037@gmail.com > > > >>> > > > >>> --- > > > >>> Antonino Maniscalco (11): > > > >>> drm/msm: Fix bv_fence being used as bv_rptr > > > >>> drm/msm/A6XX: Track current_ctx_seqno per ring > > > >>> drm/msm: Add a `preempt_record_size` field > > > >>> drm/msm: Add CONTEXT_SWITCH_CNTL bitfields > > > >>> drm/msm/A6xx: Implement preemption for A7XX targets > > > >>> drm/msm/A6xx: Sync relevant adreno_pm4.xml changes > > > >>> drm/msm/A6xx: Use posamble to reset counters on preemption > > > >>> drm/msm/A6xx: Add traces for preemption > > > >>> drm/msm/A6XX: Add a flag to allow preemption to submitqueue_create > > > >>> drm/msm/A6xx: Enable preemption for A750 > > > >>> Documentation: document adreno preemption > > > >>> > > > >>> Documentation/gpu/msm-preemption.rst | 98 +++++ > > > >>> drivers/gpu/drm/msm/Makefile | 1 + > > > >>> drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 2 +- > > > >>> drivers/gpu/drm/msm/adreno/a3xx_gpu.c | 2 +- > > > >>> drivers/gpu/drm/msm/adreno/a4xx_gpu.c | 2 +- > > > >>> drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 6 +- > > > >>> drivers/gpu/drm/msm/adreno/a6xx_catalog.c | 7 +- > > > >>> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 325 ++++++++++++++- > > > >>> drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 174 ++++++++ > > > >>> drivers/gpu/drm/msm/adreno/a6xx_preempt.c | 440 +++++++++++++++++++++ > > > >>> drivers/gpu/drm/msm/adreno/adreno_gpu.h | 9 +- > > > >>> drivers/gpu/drm/msm/msm_drv.c | 4 + > > > >>> drivers/gpu/drm/msm/msm_gpu.c | 2 +- > > > >>> drivers/gpu/drm/msm/msm_gpu.h | 11 - > > > >>> drivers/gpu/drm/msm/msm_gpu_trace.h | 28 ++ > > > >>> drivers/gpu/drm/msm/msm_ringbuffer.h | 18 + > > > >>> drivers/gpu/drm/msm/msm_submitqueue.c | 3 + > > > >>> drivers/gpu/drm/msm/registers/adreno/a6xx.xml | 7 +- > > > >>> .../gpu/drm/msm/registers/adreno/adreno_pm4.xml | 39 +- > > > >>> include/uapi/drm/msm_drm.h | 5 +- > > > >>> 20 files changed, 1117 insertions(+), 66 deletions(-) > > > >>> --- > > > >>> base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba > > > >>> change-id: 20240815-preemption-a750-t-fcee9a844b39 > > > >>> > > > >>> Best regards, > > > >> > > > >> I've been running vulkan-cts (1.3.7.3-0-gd71a36db16d98313c431829432a136dbda692a08 from Yocto) > > > >> on SM8650-QRD, SM8550-QRD & SM8450-HDK boards with enable_preemption in default value > > > >> and forced to 1, and I've seen no regression so far > > > >> > > > >> On SM8550, I've seen a few: > > > >> platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* Message HFI_H2F_MSG_GX_BW_PERF_VOTE id 2743 timed out waiting for response > > > >> platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* Unexpected message id 2743 on the response queue > > > >> but it's unrelated to preempt > > > >> > > > >> and on SM8450: > > > >> platform 3d6a000.gmu: [drm:a6xx_gmu_set_oob [msm]] *ERROR* Timeout waiting for GMU OOB set GPU_SET: 0x0 > > > >> msm_dpu ae01000.display-controller: [drm:hangcheck_handler [msm]] *ERROR* 7.3.0.1: hangcheck detected gpu lockup rb 0! > > > >> msm_dpu ae01000.display-controller: [drm:hangcheck_handler [msm]] *ERROR* 7.3.0.1: completed fence: 331235 > > > >> msm_dpu ae01000.display-controller: [drm:hangcheck_handler [msm]] *ERROR* 7.3.0.1: submitted fence: 331236 > > > >> adreno 3d00000.gpu: [drm:a6xx_irq [msm]] *ERROR* gpu fault ring 0 fence 50de4 status 00800005 rb 0000/0699 ib1 0000000000000000/0000 ib2 0000000000000000/0000 > > > >> msm_dpu ae01000.display-controller: [drm:recover_worker [msm]] *ERROR* 7.3.0.1: hangcheck recover! > > > >> msm_dpu ae01000.display-controller: [drm:recover_worker [msm]] *ERROR* 7.3.0.1: offending task: deqp-vk (/usr/lib/vulkan-cts/deqp-vk) > > > >> msm_dpu ae01000.display-controller: [drm:recover_worker [msm]] *ERROR* 7.3.0.1: hangcheck recover! > > > >> leading to a VK_ERROR_DEVICE_LOST, but again unrelated to preempt support. > > > >> > > > >> So you can also add: > > > >> Tested-by: Neil Armstrong <neil.armstrong@...aro.org> # on SM8550-QRD > > > >> Tested-by: Neil Armstrong <neil.armstrong@...aro.org> # on SM8450-HDK > > > >> > > > > > > > > Niel, > > > > > > > > On my x1e device, all submissions were somehow going into only a single > > > > ring, even the compositor's. Not sure why. So effectively preemption was > > > > not really exercised. I had to force one of the two benchmark I ran > > > > using the "highprio" mesa debug flag force submittions to ring 0. > > > > > > I think that is because GL applications (so most compositors) run > > > through zink which does not forward GL preemption to vulkan so yeah, for > > > GL applications the only way of getting preemption is the debug flag. > > > > I guess if it is mesa 24.2.x or newer it would be using the gallium > > driver. Which I guess would need xAMBLE stuff wired up. Outside of > > fd6_emit_restore() and fd6_gmem.cc there isn't really any state emit > > in IB1, so I guess it probably wouldn't be too hard to get preemption > > support wired up. > > > > BR, > > -R > > > > > Unfortunately this is not easy to fix in Zink because it creates one > > > VkDevice at screen creation and uses it for all GL contexts. Since GL > > > priority is provided per context and at context creation time Zink has > > > no way of handling this. > > > > > > Once TU will support more than one queue it will be possible for Zink to > > > create one queue per priority then pick one at context creation time. > > > Doing so would require a new vulkan extension for per queue global > > > priority. I had started working on this some time ago > > > https://gitlab.freedesktop.org/antonino/mesa/-/tree/priority_ext?ref_type=heads > > > but this solution will only be viable once TU can expose more than one > > > queue. > > > > > Thanks, both of you for the clarification. Glad about the > improvements planned for both freedreno and zink. Only lightly tested so far, but https://gitlab.freedesktop.org/robclark/mesa/-/tree/fd/a7xx-preemption?ref_type=heads appears to work for getting preemption going on gl. Needs some cleanup/etc, but if you want something with gl compositor supporting preemption, you can give it a try BR, -R > -Akhil. > > > > > > > > > If possible it is a good idea to check the new preemption traces to > > > > ensure preemption kicks in. > > > > > > > > -Akhil > > > > > > > >> Thanks, > > > >> Neil > > > > > > > > > Best regards, > > > -- > > > Antonino Maniscalco <antomani103@...il.com>
Powered by blists - more mailing lists