| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZvWCdn-lN66_tXeZ@kekkonen.localdomain>
Date: Thu, 26 Sep 2024 15:49:10 +0000
From: Sakari Ailus <sakari.ailus@...ux.intel.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Prabhakar <prabhakar.csengg@...il.com>,
Kieran Bingham <kieran.bingham@...asonboard.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v2 09/11] media: i2c: ov5645: Add internal image sink pad
Hi Laurent, Prabhakar,
On Wed, Sep 25, 2024 at 07:21:53PM +0300, Laurent Pinchart wrote:
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Tue, Sep 10, 2024 at 06:06:08PM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> >
> > Use the newly added internal pad API to expose the internal
> > configuration of the sensor to userspace in a standard manner.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> > drivers/media/i2c/ov5645.c | 107 +++++++++++++++++++++++++++----------
> > 1 file changed, 79 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> > index dc93514608ee..255c6395a268 100644
> > --- a/drivers/media/i2c/ov5645.c
> > +++ b/drivers/media/i2c/ov5645.c
> > @@ -60,6 +60,10 @@
> > #define OV5645_SDE_SAT_U 0x5583
> > #define OV5645_SDE_SAT_V 0x5584
> >
> > +#define OV5645_NATIVE_FORMAT MEDIA_BUS_FMT_SBGGR8_1X8
> > +#define OV5645_NATIVE_WIDTH 2592
> > +#define OV5645_NATIVE_HEIGHT 1944
> > +
> > /* regulator supplies */
> > static const char * const ov5645_supply_name[] = {
> > "vdddo", /* Digital I/O (1.8V) supply */
> > @@ -69,6 +73,12 @@ static const char * const ov5645_supply_name[] = {
> >
> > #define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name)
> >
> > +enum ov5645_pad_ids {
> > + OV5645_PAD_SOURCE,
> > + OV5645_PAD_IMAGE,
> > + OV5645_NUM_PADS,
> > +};
> > +
> > struct reg_value {
> > u16 reg;
> > u8 val;
> > @@ -87,7 +97,7 @@ struct ov5645 {
> > struct i2c_client *i2c_client;
> > struct device *dev;
> > struct v4l2_subdev sd;
> > - struct media_pad pad;
> > + struct media_pad pads[OV5645_NUM_PADS];
> > struct v4l2_fwnode_endpoint ep;
> > struct v4l2_rect crop;
> > struct clk *xclk;
> > @@ -826,7 +836,10 @@ static int ov5645_enum_mbus_code(struct v4l2_subdev *sd,
> > if (code->index > 0)
> > return -EINVAL;
> >
> > - code->code = MEDIA_BUS_FMT_UYVY8_1X16;
> > + if (code->pad == OV5645_PAD_IMAGE)
> > + code->code = OV5645_NATIVE_FORMAT;
> > + else
> > + code->code = MEDIA_BUS_FMT_UYVY8_1X16;
> >
> > return 0;
> > }
> > @@ -835,16 +848,24 @@ static int ov5645_enum_frame_size(struct v4l2_subdev *subdev,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_frame_size_enum *fse)
> > {
> > - if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16)
> > - return -EINVAL;
> > -
> > - if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data))
> > - return -EINVAL;
> > -
> > - fse->min_width = ov5645_mode_info_data[fse->index].width;
> > - fse->max_width = ov5645_mode_info_data[fse->index].width;
> > - fse->min_height = ov5645_mode_info_data[fse->index].height;
> > - fse->max_height = ov5645_mode_info_data[fse->index].height;
> > + if (fse->pad == OV5645_PAD_IMAGE) {
> > + if (fse->code != OV5645_NATIVE_FORMAT || fse->index > 0)
> > + return -EINVAL;
> > +
> > + fse->min_width = OV5645_NATIVE_WIDTH;
> > + fse->max_width = OV5645_NATIVE_WIDTH;
> > + fse->min_height = OV5645_NATIVE_HEIGHT;
> > + fse->max_height = OV5645_NATIVE_HEIGHT;
> > + } else {
> > + if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16 ||
>
> This will be interesting. With internal pads we will introduce the
> concept of a "subdev model", which will formally document how the V4L2
> subdev configuration items (formats, selection rectangles, ...) maps to
> hardware features. Sakari is working on the definition of a subdev model
> for raw sensors, that should catter for the needs of raw sensors without
> a bayer scaler (the vast majority of them). To use internal pads with a
> non-raw sensor, we'll have to define a model. It may be more
> challenging/complicated to do so, as the YUV sensor features are less
> standardized, but it will be an interesting development.
I think I'll make the sub-device model a bitmask, to allow implementing
more than one at the same time.
I'll try to remember to cc you to the patchset when I'll send it, likely
next week.
>
> > + fse->index >= ARRAY_SIZE(ov5645_mode_info_data))
> > + return -EINVAL;
> > +
> > + fse->min_width = ov5645_mode_info_data[fse->index].width;
> > + fse->max_width = ov5645_mode_info_data[fse->index].width;
> > + fse->min_height = ov5645_mode_info_data[fse->index].height;
> > + fse->max_height = ov5645_mode_info_data[fse->index].height;
> > + }
> >
> > return 0;
> > }
> > @@ -855,18 +876,55 @@ static int ov5645_set_format(struct v4l2_subdev *sd,
> > {
> > struct ov5645 *ov5645 = to_ov5645(sd);
> > struct v4l2_mbus_framefmt *__format;
> > + struct v4l2_rect *compose;
> > struct v4l2_rect *__crop;
>
> While at it, could you rename __crop to crop ?
>
> > const struct ov5645_mode_info *new_mode;
> > int ret;
> >
> > - __crop = v4l2_subdev_state_get_crop(sd_state, 0);
> > + if (format->pad != OV5645_PAD_SOURCE)
> > + return v4l2_subdev_get_fmt(sd, sd_state, format);
> > +
> > new_mode = v4l2_find_nearest_size(ov5645_mode_info_data,
> > ARRAY_SIZE(ov5645_mode_info_data),
> > width, height, format->format.width,
> > format->format.height);
> > -
> > - __crop->width = new_mode->width;
> > - __crop->height = new_mode->height;
> > + format->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
> > + format->format.width = new_mode->width;
> > + format->format.height = new_mode->height;
> > + format->format.field = V4L2_FIELD_NONE;
> > + format->format.colorspace = V4L2_COLORSPACE_SRGB;
> > + format->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> > + format->format.quantization = V4L2_QUANTIZATION_DEFAULT;
> > + format->format.xfer_func = V4L2_XFER_FUNC_DEFAULT;
>
> Drivers are not supposed to return DEFAULT values, you should pick
> appropriate values.
>
> > +
> > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_IMAGE);
>
> Maybe __format could also become fmt.
>
> > + *__format = format->format;
> > + __format->code = OV5645_NATIVE_FORMAT;
> > + __format->width = OV5645_NATIVE_WIDTH;
> > + __format->height = OV5645_NATIVE_HEIGHT;
> > +
> > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_IMAGE);
> > + __crop->width = format->format.width;
> > + __crop->height = format->format.height;
> > +
> > + /*
> > + * The compose rectangle models binning, its size is the sensor output
> > + * size.
> > + */
> > + compose = v4l2_subdev_state_get_compose(sd_state, OV5645_PAD_IMAGE);
> > + compose->left = 0;
> > + compose->top = 0;
> > + compose->width = format->format.width;
> > + compose->height = format->format.height;
> > +
> > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_SOURCE);
> > + __crop->left = 0;
> > + __crop->top = 0;
> > + __crop->width = format->format.width;
> > + __crop->height = format->format.height;
> > +
> > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_SOURCE);
> > + *__format = format->format;
> >
> > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > ret = __v4l2_ctrl_s_ctrl_int64(ov5645->pixel_clock,
> > @@ -882,14 +940,6 @@ static int ov5645_set_format(struct v4l2_subdev *sd,
> > ov5645->current_mode = new_mode;
> > }
> >
> > - __format = v4l2_subdev_state_get_format(sd_state, 0);
> > - __format->width = __crop->width;
> > - __format->height = __crop->height;
> > - __format->code = MEDIA_BUS_FMT_UYVY8_1X16;
> > - __format->field = V4L2_FIELD_NONE;
> > - __format->colorspace = V4L2_COLORSPACE_SRGB;
> > -
> > - format->format = *__format;
> >
> > return 0;
> > }
> > @@ -899,7 +949,7 @@ static int ov5645_init_state(struct v4l2_subdev *subdev,
> > {
> > struct v4l2_subdev_format fmt = {
> > .which = V4L2_SUBDEV_FORMAT_TRY,
> > - .pad = 0,
> > + .pad = OV5645_PAD_SOURCE,
> > .format = {
> > .code = MEDIA_BUS_FMT_UYVY8_1X16,
> > .width = ov5645_mode_info_data[1].width,
> > @@ -919,7 +969,7 @@ static int ov5645_get_selection(struct v4l2_subdev *sd,
> > if (sel->target != V4L2_SEL_TGT_CROP)
> > return -EINVAL;
> >
> > - sel->r = *v4l2_subdev_state_get_crop(sd_state, 0);
> > + sel->r = *v4l2_subdev_state_get_crop(sd_state, sel->pad);
>
> Now there's a compose rectangle, you should support getting it.
>
> > return 0;
> > }
> >
> > @@ -1123,11 +1173,12 @@ static int ov5645_probe(struct i2c_client *client)
> > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops);
> > ov5645->sd.internal_ops = &ov5645_internal_ops;
> > ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> > - ov5645->pad.flags = MEDIA_PAD_FL_SOURCE;
> > + ov5645->pads[OV5645_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> > + ov5645->pads[OV5645_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL;
> > ov5645->sd.dev = dev;
> > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> >
> > - ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad);
> > + ret = media_entity_pads_init(&ov5645->sd.entity, ARRAY_SIZE(ov5645->pads), ov5645->pads);
>
> Line wrap.
It's good to run:
scripts/checkpatch.pl --strict --max-line-length=80
on the patches.
>
> > if (ret < 0) {
> > dev_err_probe(dev, ret, "could not register media entity\n");
> > goto free_ctrl;
>
--
Kind regards,
Sakari Ailus
Powered by blists - more mailing lists