lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240927042230.277144-1-michael.wu@kneron.us>
Date: Fri, 27 Sep 2024 12:22:15 +0800
From: Michael Wu <michael.wu@...ron.us>
To: Andi Shyti <andi.shyti@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
	Mika Westerberg <mika.westerberg@...ux.intel.com>,
	Jan Dabros <jsd@...ihalf.com>,
	linux-i2c@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: Morgan Chang <morgan.chang@...ron.us>,
	mvp.kutali@...il.com,
	Michael Wu <michael.wu@...ron.us>
Subject: [PATCH v2 0/2] Compute HS HCNT and LCNT based on HW parameters

In commit 35eba185fd1a ("i2c: designware: Calculate SCL timing parameters for
High Speed Mode") hs_hcnt and hs_lcnt are computed based on fixed tHIGH = 160
and tLOW = 320. However, the set of these fixed values only applies to the
combination of hardware parameters "IC_CAP_LOADING = 400pF" and
"IC_FREQ_OPTIMIZATION = 1". Outside of this combination, SCL frequency may not
reach 3.4 MHz if hs_hcnt and hs_lcnt are both computed using these two fixed
values.

Since there are no any registers controlling these two hardware parameters,
their values can only be declared through the device tree.

v2:
- provide more hardware information in dt-bindings
- rename "bus-loading" to "bus-capacitance-pf"
- call new i2c_dw_fw_parse_hw_params() in i2c_dw_fw_parse_and_configure() to
  parse hardware parameters from the device tree.

Michael Wu (2):
  dt-bindings: i2c: snps,designware-i2c: add bus-capacitance-pf and
    clk-freq-optimized
  i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters

 .../bindings/i2c/snps,designware-i2c.yaml        | 14 ++++++++++++++
 drivers/i2c/busses/i2c-designware-common.c       | 16 ++++++++++++++++
 drivers/i2c/busses/i2c-designware-core.h         |  6 ++++++
 drivers/i2c/busses/i2c-designware-master.c       | 14 ++++++++++++--
 4 files changed, 48 insertions(+), 2 deletions(-)

-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ