| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a6502c65-770b-4dee-3fab-2ec58c277404@linux.intel.com>
Date: Fri, 27 Sep 2024 14:16:52 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Jian-Hong Pan <jhp@...lessos.org>
cc: Bjorn Helgaas <helgaas@...nel.org>, Johan Hovold <johan@...nel.org>,
David Box <david.e.box@...ux.intel.com>,
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>,
Nirmal Patel <nirmal.patel@...ux.intel.com>,
Jonathan Derrick <jonathan.derrick@...ux.dev>, linux-pci@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>, linux@...lessos.org
Subject: Re: [PATCH v10 3/3] PCI/ASPM: Make pci_save_aspm_l1ss_state save
both child and parent's L1SS configuration
On Fri, 27 Sep 2024, Jian-Hong Pan wrote:
> PCI devices' parameters on the VMD bus have been programmed properly
> originally. But, cleared after pci_reset_bus() and have not been restored
> correctly. This leads the link's L1.2 between PCIe Root Port and child
> device gets wrong configs.
>
> Here is a failed example on ASUS B1400CEAE with enabled VMD. Both PCIe
> bridge and NVMe device should have the same LTR1.2_Threshold value.
> However, they are configured as different values in this case:
>
> 10000:e0:06.0 PCI bridge [0604]: Intel Corporation 11th Gen Core Processor PCIe Controller [8086:9a09] (rev 01) (prog-if 00 [Normal decode])
> ...
> Capabilities: [200 v1] L1 PM Substates
> L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
> PortCommonModeRestoreTime=45us PortTPowerOnTime=50us
> L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> T_CommonMode=0us LTR1.2_Threshold=0ns
> L1SubCtl2: T_PwrOn=0us
>
> 10000:e1:00.0 Non-Volatile memory controller [0108]: Sandisk Corp WD Blue SN550 NVMe SSD [15b7:5009] (rev 01) (prog-if 02 [NVM Express])
> ...
> Capabilities: [900 v1] L1 PM Substates
> L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
> PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
> L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> T_CommonMode=0us LTR1.2_Threshold=101376ns
> L1SubCtl2: T_PwrOn=50us
>
> Here is VMD mapped PCI device tree:
>
> -+-[0000:00]-+-00.0 Intel Corporation Device 9a04
> | ...
> \-[10000:e0]-+-06.0-[e1]----00.0 Sandisk Corp WD Blue SN550 NVMe SSD
> \-17.0 Intel Corporation Tiger Lake-LP SATA Controller
>
> When pci_reset_bus() resets the bus [e1] of the NVMe, it only saves and
> restores NVMe's state before and after reset.
> Because bus [e1] has only one
> device: 10000:e1:00.0 NVMe.
This is incomplete sentence. And I don't understand why the number of
devices is relevant. Perhaps just drop it?
> The PCIe bridge is missed.
Unclear what this refers to (I know what you mean but please write it
so that other reading this 10 years from now will also get what is
missed).
> However, when it
> restores the NVMe's state, it also restores the ASPM L1SS between the PCIe
> bridge and the NVMe by pci_restore_aspm_l1ss_state().
"it also restores ..." -> "ASPM code restores L1SS for both the parent
bridge and the NVMe in pci_restore_aspm_l1ss_state()."
> The NVMe's L1SS is
> restored correctly. But, the PCIe bridge's L1SS is restored with the wrong
> value 0x0 [1]. Because, the parent device (PCIe bridge)'s L1SS is not saved
Join these sentences without . and drop the comma.
I'd say "was not saved" because at that point it occurred clearly before
the restore.
> by pci_save_aspm_l1ss_state() before reset. That is why
> pci_restore_aspm_l1ss_state() gets the parent device (PCIe bridge)'s saved
> state capability data and restores L1SS with value 0.
This last sentence seems duplicated.
> So, if the PCI device has a parent, make pci_save_aspm_l1ss_state() save
> the parent's L1SS configuration, too. This is symmetric on
> pci_restore_aspm_l1ss_state().
>
> [1]: https://lore.kernel.org/linux-pci/CAPpJ_eexU0gCHMbXw_z924WxXw0+B6SdS4eG9oGpEX1wmnMLkQ@mail.gmail.com/
Just put this into Link tag.
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218394
Closes: ?
Fixes tag is also missing.
Add:
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
> Signed-off-by: Jian-Hong Pan <jhp@...lessos.org>
> ---
> v9:
> - Drop the v8 fix about drivers/pci/pcie/aspm.c. Use this in VMD instead.
>
> v10:
> - Drop the v9 fix about drivers/pci/controller/vmd.c
> - Fix in PCIe ASPM to make it symmetric between pci_save_aspm_l1ss_state()
> and pci_restore_aspm_l1ss_state()
>
> drivers/pci/pcie/aspm.c | 39 +++++++++++++++++++++++++++++++--------
> 1 file changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> index bd0a8a05647e..823aaf813978 100644
> --- a/drivers/pci/pcie/aspm.c
> +++ b/drivers/pci/pcie/aspm.c
> @@ -81,24 +81,47 @@ void pci_configure_aspm_l1ss(struct pci_dev *pdev)
>
> void pci_save_aspm_l1ss_state(struct pci_dev *pdev)
> {
> - struct pci_cap_saved_state *save_state;
> - u16 l1ss = pdev->l1ss;
> + struct pci_cap_saved_state *pl_save_state, *cl_save_state;
> + struct pci_dev *parent;
> u32 *cap;
>
> /*
> * Save L1 substate configuration. The ASPM L0s/L1 configuration
> * in PCI_EXP_LNKCTL_ASPMC is saved by pci_save_pcie_state().
> */
> - if (!l1ss)
> + if (!pdev->l1ss)
> return;
>
> - save_state = pci_find_saved_ext_cap(pdev, PCI_EXT_CAP_ID_L1SS);
> - if (!save_state)
> + cl_save_state = pci_find_saved_ext_cap(pdev, PCI_EXT_CAP_ID_L1SS);
> + if (!cl_save_state)
> return;
>
> - cap = &save_state->cap.data[0];
> - pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL2, cap++);
> - pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, cap++);
> + cap = &cl_save_state->cap.data[0];
> + pci_read_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL2, cap++);
> + pci_read_config_dword(pdev, pdev->l1ss + PCI_L1SS_CTL1, cap++);
> +
> + /*
> + * If here is a parent device and it has not saved state, save parent's
> + * L1 substate configuration, too. This is symmetric on
> + * pci_restore_aspm_l1ss_state().
> + */
> + if (!pdev->bus || !pdev->bus->self)
> + return;
> +
> + parent = pdev->bus->self;
> + if (!parent->l1ss)
> + return;
> +
> + pl_save_state = pci_find_saved_ext_cap(parent, PCI_EXT_CAP_ID_L1SS);
> + if (!pl_save_state)
> + return;
> +
> + if (parent->state_saved)
> + return;
This decision can be made before even reading the pl_saved_state.
> +
> + cap = &pl_save_state->cap.data[0];
> + pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, cap++);
> + pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, cap++);
This approach duplicates code and that seems unnecessary to me.
Could you instead leave the current function (nearly?) as is and use it as
a helper for a new pci_save_aspm_l1ss_state() which calls the helper first
for the pdev and then for its parent (if needed). Or do I miss something
why that is not possible?
--
i.
Powered by blists - more mailing lists