[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <dd9ae106-3c39-423b-9413-5a7ca57f7aec@kernel.org>
Date: Fri, 27 Sep 2024 16:26:11 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: iansdannapel@...il.com, mdf@...nel.org, hao.wu@...el.com,
yilun.xu@...el.com, trix@...hat.com, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, neil.armstrong@...aro.org, heiko.stuebner@...rry.de,
rafal@...ecki.pl, linus.walleij@...aro.org, linux-fpga@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] dt-bindings: fpga: Add Efinix serial SPI programming
bindings
On 27/09/2024 16:14, iansdannapel@...il.com wrote:
> From: Ian Dannapel <iansdannapel@...il.com>
>
> Add device tree binding documentation for configuring Efinix FPGA
> using serial SPI passive programming mode.
>
> Signed-off-by: Ian Dannapel <iansdannapel@...il.com>
> ---
> .../fpga/efinix,trion-spi-passive.yaml | 85 +++++++++++++++++++
> 1 file changed, 85 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/efinix,trion-spi-passive.yaml
>
> diff --git a/Documentation/devicetree/bindings/fpga/efinix,trion-spi-passive.yaml b/Documentation/devicetree/bindings/fpga/efinix,trion-spi-passive.yaml
> new file mode 100644
> index 000000000000..ec6697fa6f44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/efinix,trion-spi-passive.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/efinix,trion-spi-passive.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Efinix SPI FPGA Manager
> +
> +maintainers:
> + - Ian Dannapel <iansdannapel@...il.com>
> +
> +description: |
> + Efinix Trion and Titanium Series FPGAs support a method of loading the
> + bitstream over what is referred to as "SPI Passive Programming".
> + Only serial (1x bus width) is supported, setting the programming mode
> + is not in the scope the this manager and must be done elsewhere.
> +
> + Warning: The slave serial link is not technically SPI and therefore it is
> + not recommended to have other devices on the same bus since it might
> + interfere or be interfered by other transmissions.
> +
> + References:
> + - https://www.efinixinc.com/docs/an033-configuring-titanium-fpgas-v2.6.pdf
> + - https://www.efinixinc.com/docs/an006-configuring-trion-fpgas-v6.0.pdf
> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - efinix,trion-spi-passive
> + - efinix,titanium-spi-passive
1. Your driver suggests these are compatible, so make them compatible
with using fallback.
2. What is "spi-passive"? Compatible is supposed to be the name of the
device, so I assume this is "trion"? Can trion be anything else than fpga?
> +
> + spi-cpha: true
> +
> + spi-cpol: true
> +
> + spi-max-frequency:
> + maximum: 25000000
> +
> + reg:
> + maxItems: 1
> +
> + creset-gpios:
reset-gpios
Do not invent own properties.
> + description:
> + reset and re-configuration trigger pin (low active)
> + maxItems: 1
> +
> + cs-gpios:
> + description:
> + chip-select pin (low active)
Eee? That's a property of controller, not child. Aren't you duplicating
existing controller property?
> + maxItems: 1
> +
> + cdone-gpios:
> + description:
> + optional configuration done status pin (high active)
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - creset-gpios
> + - cs-gpios
> +
> +additionalProperties: false
unevaluatedProperties instead
> +
Best regards,
Krzysztof
Powered by blists - more mailing lists