| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240930-th1520-pinctrl-v3-5-32cea2bdbecb@tenstorrent.com>
Date: Mon, 30 Sep 2024 12:50:55 -0700
From: Drew Fustini <dfustini@...storrent.com>
To: Drew Fustini <drew@...7.com>, Guo Ren <guoren@...nel.org>,
Fu Wei <wefu@...hat.com>, Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Thomas Bonnefille <thomas.bonnefille@...tlin.com>
Cc: linux-riscv@...ts.infradead.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Drew Fustini <dfustini@...storrent.com>
Subject: [PATCH v3 5/8] riscv: dts: thead: Adjust TH1520 GPIO labels
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
Adjust labels for the TH1520 GPIO controllers such that GPIOs can be
referenced by the names used by the documentation. Eg.
GPIO0_X -> <&gpio0 X Y>
GPIO1_X -> <&gpio1 X Y>
GPIO2_X -> <&gpio2 X Y>
GPIO3_X -> <&gpio3 X Y>
GPIO4_X -> <&gpio4 X Y>
AOGPIO_X -> <&aogpio X Y>
Remove labels for the parent GPIO devices that shouldn't need to be
referenced.
Tested-by: Thomas Bonnefille <thomas.bonnefille@...tlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
Signed-off-by: Drew Fustini <dfustini@...storrent.com>
---
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 2 ++
arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts | 2 ++
arch/riscv/boot/dts/thead/th1520.dtsi | 24 +++++++++++-----------
3 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index e88b4fce755e..69f82e7afd0b 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -17,6 +17,8 @@ aliases {
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &aogpio;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
index 7738d2895c5a..58ad381fc1c3 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -14,6 +14,8 @@ aliases {
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &aogpio;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 7dcc250ee1d1..b958f249930e 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -322,14 +322,14 @@ uart3: serial@...7f04000 {
status = "disabled";
};
- gpio2: gpio@...7f34000 {
+ gpio@...7f34000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xe7f34000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO2>;
- portc: gpio-controller@0 {
+ gpio2: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -342,14 +342,14 @@ portc: gpio-controller@0 {
};
};
- gpio3: gpio@...7f38000 {
+ gpio@...7f38000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xe7f38000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO3>;
- portd: gpio-controller@0 {
+ gpio3: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -369,14 +369,14 @@ padctrl1_apsys: pinctrl@...7f3c000 {
thead,pad-group = <2>;
};
- gpio0: gpio@...c005000 {
+ gpio@...c005000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xec005000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO0>;
- porta: gpio-controller@0 {
+ gpio0: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -389,14 +389,14 @@ porta: gpio-controller@0 {
};
};
- gpio1: gpio@...c006000 {
+ gpio@...c006000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xec006000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_GPIO1>;
- portb: gpio-controller@0 {
+ gpio1: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -544,13 +544,13 @@ timer7: timer@...fc3303c {
status = "disabled";
};
- ao_gpio0: gpio@...ff41000 {
+ gpio@...ff41000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xfff41000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- porte: gpio-controller@0 {
+ aogpio: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
@@ -570,13 +570,13 @@ padctrl_aosys: pinctrl@...ff4a000 {
clocks = <&aonsys_clk>;
};
- ao_gpio1: gpio@...ff52000 {
+ gpio@...ff52000 {
compatible = "snps,dw-apb-gpio";
reg = <0xff 0xfff52000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- portf: gpio-controller@0 {
+ gpio4: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
--
2.34.1
Powered by blists - more mailing lists