linux-kernel - [PATCH 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240930213008.159647-2-andreas@kemnade.info>
Date: Mon, 30 Sep 2024 23:30:05 +0200
From: Andreas Kemnade <andreas@...nade.info>
To: Conor Dooley <conor+dt@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	linux-kernel@...r.kernel.org,
	Rob Herring <robh@...nel.org>,
	khilman@...libre.com,
	devicetree@...r.kernel.org,
	tony@...mide.com,
	rogerq@...nel.org,
	aaro.koskinen@....fi,
	linux-omap@...r.kernel.org
Cc: Andreas Kemnade <andreas@...nade.info>
Subject: [PATCH 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators

To properly have things running after cold boot, define
GPIO regulators. Naming is based on board file.

In the vendor kernel they are enabled in a function
called bt2ws_dcdc_init() if the system is not booted just
to charge the battery.

Signed-off-by: Andreas Kemnade <andreas@...nade.info>
---
 .../boot/dts/ti/omap/omap4-epson-embt2ws.dts  | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index 339e52ba3614..d6b0abba19f6 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -29,6 +29,42 @@ backlight-right {
 		power-supply = <&unknown_supply>;
 	};
 
+	cb_v18: cb-v18 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&cb_v18_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "cb_v18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cb_v33: cb-v33 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&cb_v33_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "cb_v33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cb-v50 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&cb_v50_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "cb_v50";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	chosen {
 		stdout-path = &uart3;
 	};
@@ -46,6 +82,19 @@ key-lock {
 		};
 	};
 
+	lb_v50: lb-v50 {
+		/* required for many things at the head (probably indirectly) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&lb_v50_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "lb_v50";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	unknown_supply: unknown-supply {
 		compatible = "regulator-fixed";
 		regulator-name = "unknown";
@@ -336,6 +385,24 @@ OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE3) /* gpio25 */
 		>;
 	};
 
+	cb_v18_pins: pinmux-cb-v18-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE3) /* gpio28 */
+		>;
+	};
+
+	cb_v33_pins: pinmux-cb-v33-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE3) /* gpio190 */
+		>;
+	};
+
+	cb_v50_pins: pinmux-cb-v50-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE3) /* gpio191 */
+		>;
+	};
+
 	gpio_keys_pins: pinmux-gpio-key-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x56, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio35 */
@@ -387,6 +454,12 @@ OMAP4_IOPAD(0x005c, PIN_OUTPUT | MUX_MODE1)
 		>;
 	};
 
+	lb_v50_pins: pinmux-lb-v50-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE3) /* gpio27 */
+		>;
+	};
+
 	mcbsp2_pins: pinmux-mcbsp2-pins {
 		pinctrl-single,pins = <
 			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_clkx */
-- 
2.39.5