linux-kernel - [PATCH v1 4/8] ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240930070500.3174431-5-Delphine_CC_Chiu@wiwynn.com>
Date: Mon, 30 Sep 2024 15:04:55 +0800
From: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>
To: patrick@...cx.xyz,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Joel Stanley <joel@....id.au>,
	Andrew Jeffery <andrew@...econstruct.com.au>
Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@...il.com>,
	Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-aspeed@...ts.ozlabs.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v1 4/8] ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards

From: Ricky CX Wu <ricky.cx.wu.wiwynn@...il.com>

Change the address of the I2C mux for two fan boards to 0x74
according to schematic.

Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@...il.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 80 ++++++++++---------
 1 file changed, 43 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 26e0fcbed8d2..ecf012c9cbbc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -32,6 +32,8 @@ aliases {
 		i2c27 = &imux27;
 		i2c28 = &imux28;
 		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
 		i2c34 = &imux34;
 		i2c35 = &imux35;
 	};
@@ -1062,6 +1064,8 @@ gpio@23 {
 };
 
 &i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
 	adc@1d {
@@ -1122,20 +1126,50 @@ eeprom@51 {
 		reg = <0x51>;
 	};
 
-	i2c-mux@71 {
-		compatible = "nxp,pca9846";
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		idle-state = <0>;
 		i2c-mux-idle-disconnect;
-		reg = <0x71>;
+		reg = <0x73>;
 
 		i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			adc@1f {
 				compatible = "ti,adc128d818";
 				reg = <0x1f>;
@@ -1152,6 +1186,8 @@ pwm@20{
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			pwm@23{
@@ -1181,10 +1217,10 @@ gpio@61 {
 			};
 		};
 
-		i2c@1 {
+		imux31: i2c@1 {
+			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
 
 			adc@1f {
 				compatible = "ti,adc128d818";
@@ -1202,6 +1238,8 @@ pwm@20{
 			gpio@22{
 				compatible = "ti,tca6424";
 				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			pwm@23{
@@ -1231,38 +1269,6 @@ gpio@61 {
 			};
 		};
 	};
-
-	i2c-mux@73 {
-		compatible = "nxp,pca9544";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle-state = <0>;
-		i2c-mux-idle-disconnect;
-		reg = <0x73>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc@35 {
-				compatible = "maxim,max11617";
-				reg = <0x35>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc@35 {
-				compatible = "maxim,max11617";
-				reg = <0x35>;
-			};
-		};
-	};
 };
 
 &i2c15 {
-- 
2.25.1