lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20240930022526.7255-1-shenlichuan@vivo.com>
Date: Mon, 30 Sep 2024 10:25:26 +0800
From: Shen Lichuan <shenlichuan@...o.com>
To: Thinh.Nguyen@...opsys.com,
	gregkh@...uxfoundation.org
Cc: linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	opensource.kernel@...o.com,
	Shen Lichuan <shenlichuan@...o.com>
Subject: [PATCH v2] usb: dwc3: Correct some typos in comments

Fixed some confusing typos that were currently identified with codespell,
the details are as follows:

-in the code comments:
drivers/usb/dwc3/core.c:1406: feild ==> field
drivers/usb/dwc3/core.h:84: boundries ==> boundaries
drivers/usb/dwc3/ep0.c:148: issueing ==> issuing
drivers/usb/dwc3/host.c:38: temperary ==> temporarily

Also fixed a syntax problem in the comments.

Signed-off-by: Shen Lichuan <shenlichuan@...o.com>
---
v2: Corrected the grammatical errors in the commented sentence.
v1: https://lore.kernel.org/all/6591a368-e2aa-fa8b-c3d0-2a438f52c126@omp.ru/

 drivers/usb/dwc3/core.c | 2 +-
 drivers/usb/dwc3/core.h | 2 +-
 drivers/usb/dwc3/ep0.c  | 2 +-
 drivers/usb/dwc3/host.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9eb085f359ce..3612a57f7877 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1403,7 +1403,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	/*
 	 * When configured in HOST mode, after issuing U3/L2 exit controller
-	 * fails to send proper CRC checksum in CRC5 feild. Because of this
+	 * fails to send proper CRC checksum in CRC5 field. Because of this
 	 * behaviour Transaction Error is generated, resulting in reset and
 	 * re-enumeration of usb device attached. All the termsel, xcvrsel,
 	 * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c71240e8f7c7..2cb88e08e746 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -81,7 +81,7 @@
 #define DWC3_GSNPSREV_MASK	0xffff
 #define DWC3_GSNPS_ID(p)	(((p) & DWC3_GSNPSID_MASK) >> 16)
 
-/* DWC3 registers memory space boundries */
+/* DWC3 registers memory space boundaries */
 #define DWC3_XHCI_REGS_START		0x0
 #define DWC3_XHCI_REGS_END		0x7fff
 #define DWC3_GLOBALS_REGS_START		0xc100
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index c9533a99e47c..f3d97ad5156e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -145,7 +145,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 	 * Unfortunately we have uncovered a limitation wrt the Data Phase.
 	 *
 	 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
-	 * come before issueing Start Transfer command, but if we do, we will
+	 * come before issuing Start Transfer command, but if we do, we will
 	 * miss situations where the host starts another SETUP phase instead of
 	 * the DATA phase.  Such cases happen at least on TD.7.6 of the Link
 	 * Layer Compliance Suite.
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index e0533cee6870..b48e108fc8fe 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -35,7 +35,7 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
 	u32 reg;
 	int i;
 
-	/* xhci regs is not mapped yet, do it temperary here */
+	/* xhci regs are not mapped yet, do it temporarily here */
 	if (dwc->xhci_resources[0].start) {
 		xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
 		if (!xhci_regs) {
-- 
2.17.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ