[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240930103041.49229-1-brgl@bgdev.pl>
Date: Mon, 30 Sep 2024 12:30:36 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Kalle Valo <kvalo@...nel.org>
Cc: linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH v4 0/3] arm64: dts: qcom: sc8280xp: enable WLAN and Bluetooth
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
This correctly models the WLAN and Bluetooth modules on two boards using
the sc8280xp SoC. For the sc8280xp-crd we add the PMU, wifi and bluetooth
nodes with the correctly modelled wiring between them. For the X13s, we
rework existing nodes so that they align with the new DT bindings
contract.
v3 -> v4:
- bind bluetooth pins on X13s in patch 3/3
- only drop the regulator-always-on properties for vreg_s11b and vreg_s12b
and fold this change into patch 3/3
v2 -> v3:
- move adding the bt-enable-gpios to the PMU on the CRD to patch 2/4
- add a patch removing the regulator-always-on property from regulators
on X13s that no longer need it
v1 -> v2:
- fix commit message in patch 1/3
- drop drive-strength from the wlan enable pin function
- drop the calibration variant property from the wifi node of the CRD
Bartosz Golaszewski (2):
arm64: dts: qcom: sc8280xp-crd: enable bluetooth
arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
Konrad Dybcio (1):
arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 168 ++++++++++++++++++
.../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 100 +++++++++--
2 files changed, 254 insertions(+), 14 deletions(-)
--
2.30.2
Powered by blists - more mailing lists